nach oben

Journal of Materials Engineering and Performance

Erschienen in:

29.07.2022 | Technical Article

Fatigue Resistance Improvement on Double-Sided Welded Joints of a Titanium Alloy Treated by Laser Shock Peening

verfasst von: Xiaoan Hu, Jian Zhao, Xuefeng Teng, Xiangfan Nie, Yun Jiang, Yu Zhang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Double-sided argon arc welded joint of a titanium ally, which is named as TA15, was treated by laser shock peening (LSP). The hardness, residual stress, fatigue life and the mechanism of fatigue crack nucleation of the joints before and after LSP strengthening were compared and analyzed. The results show that: the surface hardness of the welded joint was increased; the initiation location of fatigue crack was transferred from the surface defect with high stress concentration to the interior. At the stress ratio of 0.1, the high stress level (590 MPa) life was improved by about 4.6 times, and the medium stress level (330 MPa) life was improved by 9.9 times. Murakami model as well as modified Murakami formula was used to evaluate and calculate the fatigue strength of double-side welded TA15 procedures by laser shock peening. The maximum error between the calculated results and the experimental results is 22.6%, and the minimum error is 7.78%.

Vorheriger Artikel Effect of Shot Peening on the Ballistic Performance of Friction Stir Welded Magnesium Alloy (AZ31B) Joints

Nächster Artikel Mechanical and Corrosion Study of Gas Tungsten Arc Welding-Based SS-304L Wire Arc Additive Manufacturing Components, and the Effect of Sputtered (TiN) Coating on Their Corrosion Behavior

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

X.W. Yang, W.Y. Li, H.Y. Li, S.T. Yao, Y.X. Sun, Y.X. Sun et al., Microstructures and Microhardness for Sheets and TIG Welded Joints of TA15 Alloy Using Friction Stir Spot Processing, Trans. Nonferr. Met. Soc. China, 2018, 28(1), p 55–65.CrossRef

H.M. Gao, Y. Bai, and T.D. Yang, Double-Sided Gas Tungsten Arc Welding Process on TC4 Titanium Alloy, Trans. Nonferr. Met. Soc. China, 2005, 15(5), p 1081–1084.

Y.M. Zhang and S.B. Zhang, Double-Sided Arc Welding Increases Weld Joint Penetration, Weld. J., 2000, 77(6), p 57–62.

S.C. Wu, Y.N. Hu, H. Duan, C. Yu, and H.S. Jiao, On the Fatigue Performance of Laser Hybrid Welded High Zn 7000 Alloys For Next Generation Railway Components, Int. J. Fatigue, 2016, 91, p 1–10.CrossRef

J.J. Wu, X.J. Liu, J.B. Zhao, H.C. Qiao, Y.N. Zhang, and H.Y. Zhang, The Online Monitoring Method Research of Laser Shock Processing Based on Plasma Acoustic Wave Signal Energy, Optik, 2019, 183, p 1151–1159.CrossRef

R.K. Nalla, I. Altenberger, U. Noster, G.Y. Liu, B. Scholtes, and R.O. Ritchie, On the Influence of Mechanical Surface Treatments—Deep Rolling and Laser Shock Peening—on the Fatigue Behavior of Ti-6Al-4V at Ambient and Elevated Temperatures, Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process., 2003, 355(1–2), p 216–230.CrossRef

C. Wang, L. Wang, X.G. Wang, and Y.J. Xu, Numerical Study of Grain Refinement Induced by Severe Shot Peening, Int. J. Mech. Sci., 2018, 146, p 280–294.CrossRef

O. Hatamleh, A Comprehensive Investigation on the Effects of Laser and Shot Peening on Fatigue Crack Growth In Friction Stir Welded AA 2195 Joints, Int. J. Fatigue, 2009, 31(5), p 974–988.CrossRef

J.B. Zhao, J.J. Wu, X.L. Hu, Y.Q. Yang, and H.C. Qiao, Effect of Laser Shock Processing on Mechanical Properties of Ti-45.5Al-2Cr-2Nb-0.15B Alloy, Opt. Int. J. Light, 2020, 217, p 164715.CrossRef

10.

X.D. Ren, B.Q. Chen, J.F. Jiao, Y. Yang, W.F. Zhou, and Z.P. Tong, Fatigue Behavior of Double-Sided Laser Shock Peened Ti-6Al-4V Thin Blade Subjected to Foreign Object Damage, Opt. Laser Technol., 2020, 121, p 105784.CrossRef

11.

J. Sheng, S. Huang, J.Z. Zhou, J.Z. Lu, S.Q. Xu, and H.F. Zhang, Effect of Laser Peening with Different Energies on Fatigue Fracture Evolution of 6061-T6 Aluminum Alloy, Opt. Laser Technol., 2016, 77, p 169–176.CrossRef

12.

F.Z. Dai, W. Cheng, Y.Y. Zheng, and X.Z. Chen, The effect of Rolling Contact Fatigue Properties on 316 Stainless Steel Under Laser Shock Peening, Opt. Laser Technol., 2021, 141(11–12), 107159.CrossRef

13.

A. Chattopadhyay, G. Muvvala, S. Sarkar, V. Racherla, and A.K. Nath, Effect of Laser Shock Peening on Microstructural, Mechanical and Corrosion Properties of Laser Beam Welded Commercially Pure Titanium, Optics. Laser Technol., 2021, 133, 106527.CrossRef

14.

P. Peyre, R. Fabbro, P. Merrien, and H.P. Lieurade, Laser Shock Processing of Aluminium Alloys Application to High Cycle Fatigue Behaviour, Mater. Sci., 1996, 210, p 102–13.

15.

Y.F. Jiang, S.L. Wang, W.F. Jiang, X.D. Gan, C. Hua, H.F. Qi et al., Fatigue Life and Fracture Evolution of Small-Hole Specimens by Laser Shock Processing, Opt. Laser Technol., 2021 https://doi.org/10.1016/j.optlastec.2020.106423CrossRef

16.

H.F. Lu, Z. Wang, J. Cai, X. Xu, K.Y. Luo, L.J. Wu et al., Effects of Laser Shock Peening on the Hot Corrosion Behaviour of the Selective Laser Melted Ti6Al4V Titanium Alloy, Corros. Sci., 2021, 188, p 109558. https://doi.org/10.1016/j.corsci.2021.109558CrossRef

17.

X.L. Pan, X. Li, L.C. Zhou, X.T. Feng, and W.F. He, Effect of Residual Stress on S–N Curves and Fracture Morphology of Ti6Al4V Titanium Alloy after Laser Shock Peening without Protective Coating, Materials, 2019, 12(22), p 3799.CrossRef

18.

X.T. Feng, X.L. Pan, W.F. He, P. Liu, Z.B. An, and L.C. Zhou, Improving High Cycle Fatigue Performance of Gas Tungsten Arc Welded Ti6Al4V Titanium Alloy By Warm Laser Shock Peening, Int. J. Fatigue, 2021, 149, p 106270. https://doi.org/10.1016/j.ijfatigue.2021.106270sCrossRef

19.

W.J. Jia, H.Z. Zhao, Y.X. Zan, P. Guo, and X.N. Mao, Effect of Heat Treatment and Laser Shock Peening on the Microstructures and Properties of Electron Beam Welded Ti-6.5Al-1Mo-1V-2Zr Joints, Vacuum, 2018, 155, p 496–503. https://doi.org/10.1016/j.vacuum.2018.06.057CrossRef

20.

X.S. Shi, X.T. Feng, J. Teng, K.F. Zhang, and L.C. Zhou, Effect of Laser Shock Peening on Microstructure and Fatigue Properties of Thin-Wall Welded Ti-6A1-4V Alloy, Vacuum, 2021, 184, p 109986. https://doi.org/10.1016/j.vacuum.2020.109986CrossRef

21.

G.V. Inamke, L. Pellone, J. Ning, and Y.C. Shin, Enhancement of weld Strength of Laser-Welded Joints of AA6061-T6 and TZM Alloys via Novel Dual-Laser Warm Laser Shock Peening, Int. J. Adv. Manuf. Technol., 2019, 104(1–4), p 907–919.CrossRef

22.

J.X. Chi, Z.Y. Cai, H.P. Zhang, H.Q. Zhang et al., Combining Manufacturing of Titanium Alloy Through Direct Energy Deposition and Laser Shock Peening Processes, Mater. Des., 2021, 203, p 109626.CrossRef

23.

B. Dra, J. Yun, B. Xha, E. Xz, E. Xx, H.F. Kai et al., Investigation of Tensile and High Cycle Fatigue Failure Behavior on a TIG Welded Titanium Alloy, Intermet, 2021, 132, p 107115.CrossRef

24.

J.Z. Lu, H.F. Lu, X. Xu, J.H. Yao, J. Cai, and K.Y. Luo, High-Performance Integrated Additive Manufacturing With Laser Shock Peening-Induced Microstructural Evolution and Improvement In Mechanical Properties of Ti6Al4V Alloy Components, Int. J. Mach. Tools Manuf., 2020, 148, p 103475.CrossRef

25.

G. Chandrasekar, C. Kailasanathan, and D.K. Verma, Investigation on Un-Peened and Laser Shock Peened Weldment of Inconel 600 Fabricated by ATIG Welding Process, Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process., 2017, 690, p 405–417.CrossRef

26.

J.Z. Lu, K.Y. Luo, Y.K. Zhang, G.F. Sun, Y.Y. Gu, J.Z. Zhou et al., Grain Refinement Mechanism of Multiple Laser Shock Processing Impacts on ANSI 304 Stainless Steel, Acta Mater., 2010, 58(16), p 5354–5362.CrossRef

27.

H. Luong and M.R. Hill, The Effects of Laser Peening on High-Cycle Fatigue in 7085-T7651 Aluminum Alloy, Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process., 2008, 477(1–2), p 208–216.CrossRef

28.

Y. Sano, M. Obata, T. Kubo, N. Mukai, M. Yoda, K. Masaki et al., Retardation of Crack Initiation and Growth In Austenitic Stainless Steels by Laser Peening Without Protective Coating, Mater. Sci. Eng. A Struct Mater. Prop. Microstruct. Process., 2006, 417(1–2), p 334–340.CrossRef

29.

S. Spanrad and J. Tong, Characterisation of Foreign Object Damage (Fod) and Early Fatigue Crack Growth in Laser Shock Peened Ti-6Al-4V Aerofoil Specimens, Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process., 2011, 528(4–5), p 2128–2136.CrossRef

30.

S. Zabeen, M. Preuss, and P.J. Withers, Evolution of a Laser Shock Peened Residual Stress Field Locally with Foreign Object Damage and Subsequent Fatigue Crack Growth, Acta Mater., 2015, 83, p 216–226.CrossRef

31.

L. Zhang, Y.K. Zhang, J.Z. Lu, F.Z. Dai, A.X. Feng, K.Y. Luo et al., Effects of Laser Shock Processing on Electrochemical Corrosion Resistance of ANSI 304 Stainless Steel Weldments After Cavitation Erosion, Corros. Sci., 2013, 66, p 5–13.CrossRef

32.

C.Y. Wang, K.Y. Luo, X.Y. Bu, Y.Y. Su, J. Cai, Q.L. Zhang et al., Laser Shock Peening-Induced Surface Gradient Stress Distribution and Extension Mechanism in Corrosion Fatigue Life of AISI 420 Stainless Steel, Corros. Sci., 2020, 177, p 109027. https://doi.org/10.1016/j.corsci.2020.109027CrossRef

33.

C. Bathias, There is no Infinite Fatigue Life in Metallic Materials, Fatigue Fract. Eng. Mater. Struct., 2010, 22(7), p 559–565.CrossRef

34.

Y.S. Hong, A.G. Zhao, G.A. Qian, and C.E. Zhou, Fatigue Strength and Crack Initiation Mechanism of Very-High-Cycle Fatigue for Low Alloy Steels, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2012, 43A(8), p 2753–2762.CrossRef

35.

G.A. Qian, Y.S. Hong, and C.G. Zhou, Investigation of High Cycle and Very-High-Cycle Fatigue Behaviors for a Structural Steel with Smooth and Notched Specimens, Eng. Fail Anal., 2010, 17(7–8), p 1517–1525.CrossRef

36.

Y. Murakamia, M. Takadab, and T. Toriyamac, Super-Long Life Tension–Compression Fatigue Properties of Quenched and Tempered 0.46% Carbon Steel, Int. J. Fatigue, 1998, 20(9), p 661–667.CrossRef

37.

S.Q. Jiang, J.Z. Zhou, Y.J. Fan, S. Huang, and J.F. Zhao, Prediction on Residual Stress and Fatigue Life of Magnesium Alloy Treated by Laser Shot Peening, Mater. Sci. Forum, 2009, 626–627, p 393–398.CrossRef

38.

Q.Y. Wang, J.Y. Berard, and A. Dubarre, Gigacycle Fatigue of Ferrous Alloys, Fatigue Fract. Eng. Mater. Struct., 2010, 22(8), p 667–672.CrossRef

Titel: Fatigue Resistance Improvement on Double-Sided Welded Joints of a Titanium Alloy Treated by Laser Shock Peening
verfasst von: Xiaoan Hu
Jian Zhao
Xuefeng Teng
Xiangfan Nie
Yun Jiang
Yu Zhang
Publikationsdatum: 29.07.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07006-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2022

Effect of Filler Wire on Laser Lap Welding of Al-Si Coated 22MnB5 Hot Stamping Steel

Reciprocating Wear of Ti-TiB In Situ Composites Synthesized via Vacuum Arc Melting

Enhanced Mechanical Properties and Corrosion Resistance by Minor Gd Alloying with a Hot-Extruded Mg Alloy

Characterization of Residual Stresses in Conventional Forming and Hydroforming of Tailor Welded Blanks

Revealing the Relationship Between AlN Architectures and the Strengthening Mechanism of the AlN/Al Composites at 350 °C

Rheology, Crystallinity, and Mechanical Investigation of Interlayer Adhesion Strength by Thermal Annealing of Polyetherimide (PEI/ULTEM 1010) Parts Produced by 3D Printing

Premium Partner

Marktübersichten