nach oben

Metallurgical and Materials Transactions A

Erschienen in:

01.08.2014

Fracture Mechanics of Rubber Epoxy Composites

verfasst von: Medhat Awad El-Hadek

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 9/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The effect of the addition of rubber micro-particles to epoxy matrix on the mechanical properties and the fracture toughness were investigated. Rubber epoxy composites were prepared with different weight percentages namely, 0, 5, 10, 15, 20, 25, 30 wt pct of rubber. Both quasi-static and dynamic ultrasonic measurements of the elastic modulus were found to decrease by 60 pct, and the critical value of the stress intensity factors was found to increase by approximately 45 pct for the rubber epoxy composites. This was also confirmed with the finite element analysis that had the same increasing trend. The fracture surface morphology reveals rough cleavage fracture in the epoxy matrix with brittle intergranular decohesion caused by the impurity segregation that exhibits relatively high micro-roughness of the fracture surfaces.

Vorheriger Artikel An Investigation of Interface Bonding of Bimetallic Foils by Combined Accumulative Roll Bonding and Asymmetric Rolling Techniques

Nächster Artikel Impact of Volume Fraction and Size of Reinforcement Particles on the Grain Size in Metal–Matrix Micro and Nanocomposites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S. Sivashanker, S. O. Osiyemi, and Asim Bag. Metall. Mater. Trans. A, Vol. 34A, pp. 1396-1400, 2003, DOI: 10.1007/s11661-003-0252-4.CrossRef

JG. Rao, and S. Ankem. Metall. Mater. Trans. A, Vol. 27A, pp. 2366–73, 1996, DOI: 10.1007/BF02651891.CrossRef

R. Kamiya, and T-W Chou. Metall. Mater. Trans. A, Vol. 31A, pp. 899–909, 2000, DOI: 10.1007/s11661-000-1009-y.CrossRef

Ferranti Jr, Louis, and Naresh N. Thadhani. Metall. Mater. Trans. A, Vol. 38, pp. 2697–2715, 2007, DOI: 10.1007/s11661-007-9272-9.CrossRef

R.C. Laible, and F.J. McGarry. Polym. Plastics Technol. Eng., Vol. 7, No. 1, pp. 27–47, (1976), DOI: 10.1080/03602557608063109.CrossRef

B.J.P. Jansen, K.Y. Tamminga, H.E.H. Meijer, and P.J. Lemstra. Polymer, Vol. 40(20), pp. 5601–607, 1999, DOI: 10.1016/S0032-3861(98)00774-5.CrossRef

K Yamanaka, Y Takagi, and T Inoue. Polymer, Vol. 30, No. 10, pp. 1839–44, (1989), DOI: 10.1016/0032-3861(89)90355-8.CrossRef

D. Ratna, A. K. Banthia, and P. C. Deb. J. Appl. Polym. Sci., Vol. 78, No. 4, pp. 716–23, 2000, DOI: 10.1002/1097-4628(20001024)78:4.CrossRef

Ignazio Blanco, Gianluca Cicala, Carmelo Lo Faro, and Antonio Recca. J. Appl. Polym. Sci., Vol. 89, No. 1, pp. 268–73, 2003, DOI: 10.1002/app.12179.CrossRef

10.

PM. Lipic, FS. Bates, and MA. Hillmyer. J. Am. Chem. Soc., Vol. 120, No. 35, pp. 8963–70, 1998, DOI: 10.1021/ja981544s.CrossRef

11.

Marc A. Hillmyer, Paul M. Lipic, Damian A. Hajduk, Kristoffer Almdal, and Frank S. Bates. J. Am. Chem. Soc., Vol. 119, No. 11, pp. 2749–50, 1997, DOI: 10.1021/ja963622m.CrossRef

12.

Julie Y. Qian, Raymond A. Pearson, Victoria L. Dimonie, and Mohamed S. El‐Aasser. J. Appl. Polym. Sci., Vol. 58, No. 2, pp. 439–48, 1995, DOI: 10.1002/app.1995.070580222.CrossRef

13.

M.A. El-Hadek, and H.V. Tippur. J. Mater. Sci., Vol. 37(8), pp. 1649–60, 2002, DOI: 10.1023/A:1014957032638.CrossRef

14.

K. Wang, L. Chen, J. Wu, M.L. Toh, C. He, and A.F. Yee. Macromolecules, Vol. 38(3), pp. 788-800, 2005, DOI: 10.1021/ma048465n.CrossRef

15.

A. Ozturk, C. Kaynak, and T. Tincer. Eur. Polym. J., Vol. 37, No. 12, pp. 2353–63, 2001, DOI: 10.1016/S0014-3057(01)00158-6.CrossRef

16.

N. Chikhi, S. Fellahi, and M. Bakar. Eur. Polym. J., Vol. 38, No. 2 pp. 251-264, 2002, DOI: 10.1016/S0014-3057(01)00194-X.CrossRef

17.

Jang-Kyo Kim, D.B. Mackay, and Yiu-Wing Mai. Composites Vol. 24, No. 6, pp. 485-494, (1993), DOI: 10.1016/0010-4361(93)90018-4.CrossRef

18.

T.H. Hsieh, A.J. Kinloch, K. Masania, J. Sohn Lee, A.C. Taylor, and S. Sprenger. J. Mater. Sci., Vol. 45, No. 5, pp. 1193–10, 2010, DOI: 10.1007/s10853-009-4064-9.CrossRef

19.

L.S. Schadler, S.C. Giannaris, and P.M. Ajayan. Appl. Phys. Lett., Vol. 73, pp. 3842–44, 1998, DOI: 10.1063/1.122911.CrossRef

20.

Shao-Yun Fu, Xi-Qiao Feng, Bernd Lauke, and Yiu-Wing Mai. Composites B, Vol. 39, No. 6, pp. 933–61, 2008, DOI: 10.1016/j.compositesb.2008.01.002.CrossRef

21.

Jun Ma, Mao-Song Mo, Xu-Sheng Du, Shao-Rong Dai, Ian Luck, J. Appl. Polym. Sci. Vol 110, No 1, pp 304–312, 2008, DOI: 10.1002/app.27882.CrossRef

22.

H.R. Azimi, R.A. Pearson, and R.W. Hertzberg. Polym. Eng. Sci., Vol. 36, No. 18, pp. 2352–65, 1996, DOI: 10.1002/pen.10633.CrossRef

23.

A.J. Kinloch, S.J. Shaw, D.A. Tod, and D.L. Hunston. Polymer, Vol. 24, No. 10, pp. 1341–54, 1983, DOI: 10.1016/0032-3861(83)90070-8.CrossRef

24.

A.J. Kinloch, S.J. Shaw, and D.L. Hunston. Polymer, Vol. 24, No. 10, pp. 1355–63, 1983, DOI: 10.1016/0032-3861(83)90071-X.CrossRef

25.

J. Gao, J. Li, B.C. Benicewicz, Su Zhao, H. Hillborg, and L.S. Schadler. Polymers, Vol. 4, No. 1, pp. 187-210, (2012), DOI: 10.3390/polym4010187.CrossRef

26.

Q-H. Le, H-C Kuan, J-B Dai, I. Zaman, L. Luong, and J. Ma. Polymer, Vol. 51(21), pp. 4867–79, 2010, DOI: 10.1016/j.polymer.2010.08.038.CrossRef

27.

Robert M. Jones, Mechanics of composite material. Taylor & Francis, New York, 2nd Edition (1999).

28.

S.J. Shaw: in Rubber Toughened Engineering Plastics, A.A. Collyer, eds., Springer, Dordrecht, 1994, pp. 165–209, DOI: 10.1007/978-94-011-1260-4_6.

29.

H.V. Tippur, K. Sridhar, and A.J. Rosakis. Int. J. Fract., Vol. 48, No. 3, pp. 193-204 (1991), DOI: 10.1007/BF00036631.CrossRef

30.

M.R. Dadfar, F. Ghadami, Mater. Des., Vol. 47, pp 16–20, (2013), DOI:10.1016/j.matdes.2012.12.035.CrossRef

31.

B. Wetzel, P. Rosso, F. Haupert, and K. Friedrich. Eng. Fract. Mech., Vol. 73, No. 16, pp. 2375–98, (2006), DOI: 10.1016/j.engfracmech.2006.05.018.CrossRef

32.

J.W. Hutchinson, and A.G. Evans. Acta Mater., Vol. 48, No. 1, pp. 125-135, (2000), DOI: 10.1016/S1359-6454(99)00291-8.CrossRef

Titel: Fracture Mechanics of Rubber Epoxy Composites
verfasst von: Medhat Awad El-Hadek
Publikationsdatum: 01.08.2014
Verlag: Springer US
Erschienen in: Metallurgical and Materials Transactions A / Ausgabe 9/2014
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-014-2315-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2014

Steel Microstructure Effect on Mechanical Properties and Corrosion Behavior of High Strength Low Carbon Steel

Effect of Dispersoid Size and Volume Fraction on Aging Behavior and Mechanical Properties of TiO2-Dispersed AA7075 Alloy Composites

A Mechanistic Study of Nanoscale Structure Development, Phase Transition, Morphology Evolution, and Growth of Ultrathin Barium Titanate Nanostructured Films

Effects of Annealing Treatment Prior to Cold Rolling on the Edge Cracking Phenomenon of Ferritic Lightweight Steel

Synthesis, Characterization, and Thermoelectric Properties of Electrospun Boron-Doped Barium-Stabilized Bismuth-Cobalt Oxide Nanoceramics

The Effect of Cu Powder During Friction Stir Welding on Microstructure and Mechanical Properties of AA3003-H18

Premium Partner

Marktübersichten