Skip to main content
main-content

Zeitschrift

International Journal on Interactive Design and Manufacturing (IJIDeM)

International Journal on Interactive Design and Manufacturing (IJIDeM) 3/2018

Ausgabe 3/2018

Inhaltsverzeichnis ( 30 Artikel )

06.07.2017 | Original Paper | Ausgabe 3/2018

Interactive design of cellular manufacturing systems, optimality and flexibility

Adnan M. Mukattash, Khaldoon K. Tahboub, Mazin B. Adil

07.07.2017 | Original Paper | Ausgabe 3/2018

Experiences in implementing design heuristics for innovation in product design

Jorge Restrepo, David Ríos-Zapata, Ricardo Mejía-Gutiérrez, Jean-Pierre Nadeau, Jérôme Pailhès

17.07.2017 | Original Paper | Ausgabe 3/2018

Tool path planning without interference for convex surfaces based on the optimal cutter orientation of the annular cutter

Chunsheng He, Minli Zheng, Shucai Yang, Xin Tong

20.07.2017 | Original Paper | Ausgabe 3/2018

Secondary features segmentation from high-density tessellated surfaces

L. Di Angelo, P. Di Stefano, A. E. Morabito

24.07.2017 | Original Paper | Ausgabe 3/2018

Using FEM simulation to predict structural performances of a sailing dinghy

A. Mancuso, G. Pitarresi, D. Tumino

04.12.2017 | Original Paper | Ausgabe 3/2018

Investigation on the temperature field under the action of the blunt tool edge for precision cutting of titanium alloys

Shucai Yang, Xin Tong, Xianli Liu, Yuhua Zhang, Chunsheng He

16.09.2017 | Original Paper | Ausgabe 3/2018 Open Access

A Welding Capability Assessment Method (WCAM) to support multidisciplinary design of aircraft structures

Julia Madrid, Anders Forslund, Rikard Söderberg, Kristina Wärmefjord, Steven Hoffenson, Johan Vallhagen, Petter Andersson

12.09.2017 | Original Paper | Ausgabe 3/2018

The process of designing a rotating platform artificial knee prosthesis with posterior stabilizers by finite element analysis

Saúl Íñiguez-Macedo, Fátima Somovilla-Gómez, Rubén Lostado-Lorza, Marina Corral-Bobadilla, María Ángeles Martínez-Calvo, Félix Sanz-Adán

15.12.2017 | Original Paper | Ausgabe 3/2018

A key components-based heuristic modular product design approach to reduce product assembly cost

Junfeng Ma, Gül E. Okudan Kremer, Mian Li

20.12.2017 | Original Paper | Ausgabe 3/2018

Fast and accurate mesh registration applied to in-line dimensional inspection processes

Jairo R. Sánchez, Álvaro Segura, Iñigo Barandiaran

20.12.2017 | Original Paper | Ausgabe 3/2018

Interactive design for additive manufacturing: a creative case of synchronous belt drive

Hu Fuwen, Cheng Jiajian, He Yunhua

06.12.2017 | Original Paper | Ausgabe 3/2018

Ellipsoid bounding region-based ChainMail algorithm for soft tissue deformation in surgical simulation

Jinao Zhang, Yongmin Zhong, Chengfan Gu

30.01.2018 | Original Paper | Ausgabe 3/2018

A preliminary design innovation aid methodology based on energy analysis and TRIZ tools exploitation

Khadija Hmina, Mohammed Sallaou, Abdelaziz Arbaoui, Larbi Lasri

20.12.2017 | Original Paper | Ausgabe 3/2018

Interactive control of combustion stability and operating limits in a biogas-fueled spark ignition engine with high compression ratio

J. Jaramillo, J. Zapata, I. D. Bedoya

19.12.2017 | Original Paper | Ausgabe 3/2018

Safety of machinery: requirement specification based on functional need and work situations analysis

Mahenina Remiel Feno, Patrick Martin, Bruno Daille-Lefevre, Alain Etienne, Jacques Marsot, Ali Siadat

27.12.2017 | Original Paper | Ausgabe 3/2018

Modal analysis of the multi-shaped coupled honeycomb structures used in satellites structural design

Houria Salem, Djilali Boutchicha, Abdelmadjid Boudjemai

07.12.2017 | Original Paper | Ausgabe 3/2018

Controlling form errors in 3D printed models associated to size and position on the working plane

Ferdinando Vitolo, Massimo Martorelli, Salvatore Gerbino, Stanislao Patalano, Antonio Lanzotti

07.12.2017 | Original Paper | Ausgabe 3/2018

Preliminary study for a full colour low cost open source 3D printer, based on the combination of fused deposition modelling (FDM) or fused filament fabrication (FFF) and inkjet printing

Fabrizio Regina, Fulvio Lavecchia, Luigi Maria Galantucci

24.01.2018 | Original Paper | Ausgabe 3/2018

Design for manufacturability of macro and micro products: a case study of heat exchanger design

F. Omidvarnia, L. Weng Feng, H. N. Hansen, A. Sarhadi, T. A. Lenau, N. H. Mortensen

27.11.2017 | Original Paper | Ausgabe 3/2018

Characterization of surface topography of 3D printed parts by multi-scale analysis

Yann Quinsat, Claire Lartigue, Christopher A. Brown, Lamine Hattali

02.12.2017 | Original Paper | Ausgabe 3/2018

Similarity and numerical analysis of the generalized Levèque problem to predict the thermal boundary layer

Ali Belhocine, Oday Ibraheem Abdullah

04.12.2017 | Original Paper | Ausgabe 3/2018

Registration of mandibular movement for dental diagnosis, planning and treatment

E. Solaberrieta, L. Barrenetxea, R. Minguez, M. Iturrate, I. De Prado

16.12.2017 | Original Paper | Ausgabe 3/2018

An interoperability process between CAD system and CAE applications based on CAD data

Riadh Ben Hadj, Imen Belhadj, Chiheb Gouta, Moez Trigui, Nizar Aifaoui, Moncef Hammadi

07.12.2017 | Original Paper | Ausgabe 3/2018

Shape and functional optimization of biodegradable magnesium stents for manufacturing by ultrasonic-microcasting technique

I. V. Gomes, H. Puga, J. L. Alves

15.12.2017 | Original Paper | Ausgabe 3/2018

Multi-criteria optimization of the part build orientation (PBO) through a combined meta-modeling/NSGAII/TOPSIS method for additive manufacturing processes

S. Khodaygan, A. H. Golmohammadi

31.01.2018 | Original Paper | Ausgabe 3/2018

Water dynamics simulation in the system pipes of a concentrated photovoltaic-thermal collector solar painel

Michele Andreoli, João Paulo N. Torres, Carlos A. F. Fernandes

19.03.2018 | Original Paper | Ausgabe 3/2018

A multi objective optimum design approach for rolling element bearing

S. Panda, S. N. Panda

28.03.2018 | Original Paper | Ausgabe 3/2018

Advanced roll powder sintering additive manufacturing technology

Vyacheslav R. Shulunov

31.03.2018 | Original Paper | Ausgabe 3/2018

Effect of hybrid wire EDM conditions on generation of residual stresses in machining of HCHCr D2 tool steel under ultrasonic vibration

Sanjay Kumar, Sandeep Grover, R. S. Walia

10.03.2018 | Original Paper | Ausgabe 3/2018

An integrated acoustic–mechanical development method for off-road motorcycle silencers: from design to sound quality test

Edoardo A. Piana, Stefano Uberti, Alessandro Copeta, Barbara Motyl, Gabriele Baronio

Aktuelle Ausgaben

Premium Partner

    Bildnachweise