nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

12.03.2020 | ORIGINAL ARTICLE

Modeling of the laser powder–based directed energy deposition process for additive manufacturing: a review

verfasst von: Xiaoyi Guan, Yaoyao Fiona Zhao

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 5-6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Laser powder–based directed energy deposition (DED) is a specific additive manufacturing process that offers an effective way to fabricate parts via simultaneous delivery of powders and laser beam. It has been developing greatly in the recent decades and being widely used for manufacturing, prototyping, and repairing. Complex physical events take place during the manufacturing process and have great impacts on its overall performance. To build high-quality parts through the laser powder–based DED process, its physical insights and process parameters need to be understood and optimized, for which modeling provides an efficient way. This article gives a review of the modeling work for the laser powder–based DED process, in which the models developed for powder stream and its interaction with laser beam, melt-pool, and bulk heating are discussed in detail. Different modeling approaches and methods towards overall and specific physical processes of the laser powder–based DED are analyzed and compared. Suggestions towards the modeling are also given at the end.

Vorheriger Artikel Correction to: Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing

Nächster Artikel Optimal milling modes identification of a jet-engine blade using time-domain technique

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams C B, Wang C C, Shin Y C, Zhang S, Zavattieri P D (2015) The status, challenges, and future of additive manufacturing in engineering. Comput Aided Des 69:65–89. https://doi.org/10.1016/j.cad.2015.04.001

Ngo TD, Kashani A, Imbalzano G, Nguyen KT, Hui D (2018) Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Part B Eng 143:172–196. https://doi.org/10.1016/j.compositesb.2018.02.012

ISO/ASTM52900-15 (2015) Standard terminology for additive manufacturing technologies - general principles - terminology. ASTM International, West Conshohocken

Frazier W E (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23:1917–1928. https://doi.org/10.1007/s11665-014-0958-z

Herzog D, Seyda V, Wycisk E, Emmelmann C (2016) Additive manufacturing of metals. Acta Mater 117:371–392. https://doi.org/10.1016/j.actamat.2016.07.019

DebRoy T, Wei H L, Zuback J S, Mukherjee T, Elmer J W, Milewski J O, Beese A M, Wilson-Heid A, De A, Zhang W (2018) Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci 92:112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001

Lee H, Lim C H J, Low M J, Tham N, Murukeshan V M, Kim Y J (2017) Lasers in additive manufacturing: a review. Int J Precis Eng Manuf-Green Technol 4:307–322. https://doi.org/10.1007/s40684-017-0037-7

Taminger K, Hafley R (2003) Electron beam freeform fabrication: a rapid metal deposition process. Proceedings of the 3rd Annual Automotive Composites Conference

Stecker S, Lachenberg K, Wang H, Salo R (2006) Advanced electron beam free form fabrication methods & technology. Amer Weld Soc Conf 17:35–46

10.

Kakinuma Y, Mori M, Oda Y, Mori T, Kashihara M, Hansel A, Fujishima M (2016) Influence of metal powder characteristics on product quality with directed energy deposition of Inconel 625. CIRP Ann 65:209–212. https://doi.org/10.1016/j.cirp.2016.04.058

11.

Heralić A, Christiansson AK, Lennartson B (2012) Height control of laser metal-wire deposition based on iterative learning control and 3D scanning. Opt Lasers Eng 50:1230–1241. https://doi.org/10.1016/j.optlaseng.2012.03.016

12.

Syed W U H, Pinkerton A J, Li L (2005) A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping. Appl Surf Sci 247:268–276. https://doi.org/10.1016/j.apsusc.2005.01.138

13.

Syed W U H, Pinkerton A J, Li L (2006) Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping. Appl Surf Sci 252:4803–4808. https://doi.org/10.1016/j.apsusc.2005.08.118

14.

Costa L, Vilar R (2009) Laser powder deposition. Rapid Prototyp J 15:264–279. https://doi.org/10.1108/13552540910979785

15.

Collins P C, Banerjee R, Banerjee S, Fraser H L (2003) Laser deposition of compositionally graded titanium-vanadium and titanium-molybdenum alloys. Mater Sci Eng A 352:118–128. https://doi.org/10.1016/s0921-5093(02)00909-7

16.

Wu D, Liang X, Li Q, Jiang L (2010) Laser rapid manufacturing of stainless steel 316l/Inconel718 functionally graded materials: microstructure evolution and mechanical properties. Int J Opt 2010:1–5. https://doi.org/10.1155/2010/802385

17.

Reichardt A, Dillon R P, Borgonia J P, Shapiro A A, McEnerney B W, Momose T, Hosemann P (2016) Development and characterization of Ti-6Al-4V to 304l stainless steel gradient components fabricated with laser deposition additive manufacturing. Mater Des 104:404–413. https://doi.org/10.1016/j.matdes.2016.05.016

18.

Korinko P, Adams T, Malene S, Gill D, Smugeresky J (2011) Laser engineered net shaping^® for repair and hydrogen compatibility. Weld J 90:171–181

19.

Fang J, Dong S, Li S, Wang Y, Xu B, Li J, Liu B, Jiang Y (2019) Direct laser deposition as repair technology for a low transformation temperature alloy: microstructure, residual stress, and properties. Mater Sci Eng A 748:119–127. https://doi.org/10.1016/j.msea.2019.01.072

20.

Zhang X, Pan T, Li W, Liou F (2019) Experimental characterization of a direct metal deposited cobalt-based alloy on tool steel for component repair. JOM 71:946–955. https://doi.org/10.1007/s11837-018-3221-5

21.

Hy Zhao, Ht Zhang, Xu C h, Xq Yang (2009) Temperature and stress fields of multi-track laser cladding. Trans Nonferrous Metals Soc China 19:s495–s501. https://doi.org/10.1016/s1003-6326(10)60096-9

22.

Scheitler C, Hugger F, Hofmann K, Hentschel O, Baetzler T, Roth S, Schmidt M (2016) Experimental investigation of direct diamond laser cladding in combination with high speed camera based process monitoring. J Laser Appl 28:022304. https://doi.org/10.2351/1.4944004

23.

Griffith M, Keicher D, Atwood C, Romero J, Smugeresky J, Harwell L, Greene D (1996) Free form fabrication of metallic components using laser engineered net shaping (LENS™). Proceedings of the Solid Freeform Fabrication Symposium, pp 125–131

24.

Thompson S M, Bian L, Shamsaei N, Yadollahi A (2015) An overview of direct laser deposition for additive manufacturing; part i: transport phenomena, modeling and diagnostics. Add Manuf 8:36–62. https://doi.org/10.1016/j.addma.2015.07.001

25.

Shamsaei N, Yadollahi A, Bian L, Thompson S M (2015) An overview of direct laser deposition for additive manufacturing; part ii: mechanical behavior, process parameter optimization and control. Add Manuf 8:12–35. https://doi.org/10.1016/j.addma.2015.07.002

26.

Griffith M, Schlienger M, Harwell L, Oliver M, Baldwin M, Ensz M, Nelson D (1998) Thermal behavior in the LENS process. Proceedings of the Solid Freeform Fabrication Symposium

27.

Kahlen F J, Kar A (2001) Tensile strengths for laser-fabricated parts and similarity parameters for rapid manufacturing. J Manuf Sci Eng 123:38–44. https://doi.org/10.1115/1.1286472

28.

Pinkerton A J (2015) Advances in the modeling of laser direct metal deposition. J Laser Appl 27:S15001. https://doi.org/10.2351/1.4815992

29.

Martukanitz R, Michaleris P, Palmer T, DebRoy T, Liu Z K, Otis R, Heo T W, Chen L Q (2014) Toward an integrated computational system for describing the additive manufacturing process for metallic materials. Add Manuf 1-4:52–63. https://doi.org/10.1016/j.addma.2014.09.002

30.

Francois M, Sun A, King W, Henson N, Tourret D, Bronkhorst C, Carlson N, Newman C, Haut T, Bakosi J, Gibbs J, Livescu V, Wiel S V, Clarke A, Schraad M, Blacker T, Lim H, Rodgers T, Owen S, Abdeljawad F, Madison J, Anderson A, Fattebert J L, Ferencz R, Hodge N, Khairallah S, Walton O (2017) Modeling of additive manufacturing processes for metals: challenges and opportunities. Curr Opin Solid State Mater Sci 21:198–206. https://doi.org/10.1016/j.cossms.2016.12.001

31.

Picasso M, Marsden C F, Wagniere J D, Frenk A, Rappaz M (1994) A simple but realistic model for laser cladding. Metall and Mater Trans B 25:281–291. https://doi.org/10.1007/bf02665211

32.

Ibarra-Medina J, Vogel M, Pinkerton A J (2011) A cfd model of laser cladding: from deposition head to melt pool dynamics. Proceedings ICALEO’2011, pp 23–27

33.

Han L, Phatak K M, Liou F W (2004) Modeling of laser cladding with powder injection. Metall and Mater Trans B 35:1139–1150. https://doi.org/10.1007/s11663-004-0070-0

34.

Huang Y L, Liu J, Ma N H, Li J G (2006) Three-dimensional analytical model on laser-powder interaction during laser cladding. J Laser Appl 18:42–46. https://doi.org/10.2351/1.2164476

35.

Vesilind P (1980) The rosin-rammler particle size distribution. Resour Recover Conserv 5:275–277. https://doi.org/10.1016/0304-3967(80)90007-4

36.

Xie J, Kar A, Rothenflue J A, Latham W P (1997) Temperature-dependent absorptivity and cutting capability of co2, nd:yag and chemical oxygen–iodine lasers. J Laser Appl 9:77–85. https://doi.org/10.2351/1.4745447

37.

Manvatkar V D, Gokhale A A, Jagan Reddy G, Venkataramana A, De A (2011) Estimation of melt pool dimensions, thermal cycle, and hardness distribution in the laser-engineered net shaping process of austenitic stainless steel. Metall and Mater Trans A 42:4080–4087. https://doi.org/10.1007/s11661-011-0787-8

38.

van de Hulst H (2012) Light scattering by small particles. Dover Publications, USA

39.

Atkins PW, De Paula J (2006) Atkins’ physical chemistry. Oxford University Press, Oxford

40.

Liu J, Li L, Zhang Y, Xie X (2005) Attenuation of laser power of a focused gaussian beam during interaction between a laser and powder in coaxial laser cladding. J Phys D Appl Phys 38:1546–1550. https://doi.org/10.1088/0022-3727/38/10/008

41.

Lin J (1999) Concentration mode of the powder stream in coaxial laser cladding. Opt Laser Technol 31:251–257. https://doi.org/10.1016/s0030-3992(99)00049-3

42.

Lin J (2000) Laser attenuation of the focused powder streams in coaxial laser cladding. J Laser Appl 12:28–33. https://doi.org/10.2351/1.521910

43.

Pinkerton A J, Li L (2002) A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle. Int Congr Appl Lasers Electro-Opt 165528: 2002. https://doi.org/10.2351/1.5066174

44.

Pinkerton A J, Li L (2004) Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling. J Manuf Sci Eng 126:33. https://doi.org/10.1115/1.1643748

45.

Yang N (2009) Concentration model based on movement model of powder flow in coaxial laser cladding. Opt Laser Technol 41:94–98. https://doi.org/10.1016/j.optlastec.2008.03.008

46.

Chew Y, Pang J H L, Bi G, Song B (2015) Thermo-mechanical model for simulating laser cladding induced residual stresses with single and multiple clad beads. J Mater Process Technol 224:89–101. https://doi.org/10.1016/j.jmatprotec.2015.04.031

47.

Tan H, Zhang F, Fu X, Meng J, Hu G, Fan W, Huang W (2016) Development of powder flow model of laser solid forming by analysis method. Int J Adv Manuf Technol 82:1421–1431. https://doi.org/10.1007/s00170-015-7481-8

48.

Wu J, Zhao P, Wei H, Lin Q, Zhang Y (2018) Development of powder distribution model of discontinuous coaxial powder stream in laser direct metal deposition. Powder Technol 340:449–458. https://doi.org/10.1016/j.powtec.2018.09.032

49.

Stankevich S L, Topalov I K, Golovin P A, Valdaytseva E A (2018) Study of metallic powder flow in discrete coaxial nozzles. J Phys Conf Ser 1109:012008. https://doi.org/10.1088/1742-6596/1109/1/012008

50.

Frenk A, Vandyoussefi M, Wagnière J D, Kurz W, Zryd A (1997) Analysis of the laser-cladding process for stellite on steel. Metall and Mater Trans B 28:501–508. https://doi.org/10.1007/s11663-997-0117-0

51.

Diniz Neto O O, Vilar R (2002) Physical-computational model to describe the interaction between a laser beam and a powder jet in laser surface processing. J Laser Appl 14:46–51. https://doi.org/10.2351/1.1436485

52.

Fu Y, Loredo A, Martin B, Vannes A B (2002) A theoretical model for laser and powder particles interaction during laser cladding. J Mater Process Technol 128:106–112. https://doi.org/10.1016/s0924-0136(02)00433-8

53.

Pinkerton A J (2007) An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition. J Phys D Appl Phys 40:7323–7334. https://doi.org/10.1088/0022-3727/40/23/012

54.

Qi H, Mazumder J, Ki H (2006) Numerical simulation of heat transfer and fluid flow in coaxial laser cladding process for direct metal deposition. J Appl Phys 024903:100. https://doi.org/10.1063/1.2209807

55.

He X, Mazumder J (2007) Transport phenomena during direct metal deposition. J Appl Phys 053113:101. https://doi.org/10.1063/1.2710780

56.

Liu Z, Qi H (2014) Numerical simulation of transport phenomena for a double-layer laser powder deposition of single-crystal superalloy. Metall and Mater Trans A 45:1903–1915. https://doi.org/10.1007/s11661-013-2178-9

57.

Liu Z, Jiang L, Wang Z, Song L (2018) Mathematical modeling of transport phenomena in multi-track and multi-layer laser powder deposition of single-crystal superalloy. Metall and Mater Trans A 49:6533–6543. https://doi.org/10.1007/s11661-018-4914-7

58.

Versteeg H, Malalasekera W (2007), An introduction to computational fluid dynamics: the finite volume method. Pearson Education Limited

59.

Katinas C, Shang W, Shin YC, Chen J (2018) Modeling particle spray and capture efficiency for direct laser deposition using a four nozzle powder injection system. J Manuf Sci Eng 140:041014–041014–10. https://doi.org/10.1115/1.4038997

60.

Shih T H, Liou W W, Shabbir A, Yang Z, Zhu J (1995) A new k-𝜖 eddy viscosity model for high reynolds number turbulent flows. Comput Fluids 24:227–238. https://doi.org/10.1016/0045-7930(94)00032-T MATH

61.

Menter F R (1994) Two-equation eddy-viscosity turbulence models for engineering applications. AIAA J 32:1598–1605

62.

Lin J (2000) Numerical simulation of the focused powder streams in coaxial laser cladding. J Mater Process Technol 105:17–23. https://doi.org/10.1016/s0924-0136(00)00584-7

63.

Wen S Y, Shin Y C, Murthy J Y, Sojka P E (2009) Modeling of coaxial powder flow for the laser direct deposition process. Int J Heat Mass Transfer 52:5867–5877. https://doi.org/10.1016/j.ijheatmasstransfer.2009.07.018 MATH

64.

Zhu G, Li D, Zhang A, Tang Y (2011) Numerical simulation of metallic powder flow in a coaxial nozzle in laser direct metal deposition. Opt Laser Technol 43:106–113. https://doi.org/10.1016/j.optlastec.2010.05.012

65.

Gosman A D, Ioannides E (1983) Aspects of computer simulation of liquid-fueled combustors. J Energy 7:482–490. https://doi.org/10.2514/3.62687

66.

Morsi S A, Alexander A J (1972) An investigation of particle trajectories in two-phase flow systems. J Fluid Mech 55:193–208. https://doi.org/10.1017/S0022112072001806 MATH

67.

Haider A, Levenspiel O (1989) Drag coefficient and terminal velocity of spherical and nonspherical particles. Powder Technol 58:63–70. https://doi.org/10.1016/0032-5910(89)80008-7

68.

Chein R, Chung J N (1988) Simulation of particle dispersion in a two-dimensional mixing layer. AIChE J 34:946–954. https://doi.org/10.1002/aic.690340607

69.

Ranz W E, Marshall Jr W R (1952a) Evaporation from drops, part i. Chem Eng Prog 48:141–146

70.

Ranz W E, Marshall JrW R (1952b) Evaporation from drops, part ii. Chem Eng Prog 48:173–180

71.

Zhang A, Li D, Zhou Z, Zhu G, Lu B (2010) Numerical simulation of powder flow field on coaxial powder nozzle in laser metal direct manufacturing. Int J Adv Manuf Technol 49:853–859. https://doi.org/10.1007/s00170-010-2657-8

72.

ANSYS, Inc (2019) ANSYS® Academic Research Fluent, Release 19 2

73.

Bedenko D V, Gulaiev I P, Gurin A M, Kovalev O B, Pinaev P A, Sergachev D V, Smirnov A L (2018) Modelling of gas-powder transportation during coaxial laser cladding. AIP Conf Proc 2027:030109. https://doi.org/10.1063/1.5065203

74.

Pan H, Liou F (2005) Numerical simulation of metallic powder flow in a coaxial nozzle for the laser aided deposition process. J Mater Process Technol 168:230–244. https://doi.org/10.1016/j.jmatprotec.2004.11.017

75.

Pan H, Landers R G, Liou F (2006) Dynamic modeling of powder delivery systems in gravity-fed powder feeders. J Manuf Sci Eng 128:337–345. https://doi.org/10.1115/1.2120778

76.

Pan H, Sparks T, Thakar Y D, Liou F (2005) The investigation of gravity-driven metal powder flow in coaxial nozzle for laser-aided direct metal deposition process. J Manuf Sci Eng 128:541–553. https://doi.org/10.1115/1.2162588

77.

Polyanskiy T A, Zaitsev A V, Gulyaev I P, Gurin A M (2018) Numerical and experimental investigation of two phase flow for direct metal deposition. Journal of Physics: Conference Series: 1109. https://doi.org/10.1088/1742-6596/1109/1/012010

78.

Zekovic S, Dwivedi R, Kovacevic R (2007) Numerical simulation and experimental investigation of gas–powder flow from radially symmetrical nozzles in laser-based direct metal deposition. Int J Mach Tools Manuf 47:112–123. https://doi.org/10.1016/j.ijmachtools.2006.02.004

79.

Zhu G, Li D, Zhang A, Pi G, Tang Y (2011) The influence of standoff variations on the forming accuracy in laser direct metal deposition. Rapid Prototyp J 17:98–106. https://doi.org/10.1108/13552541111113844

80.

Kovalev O B, Zaitsev A V, Novichenko D, Smurov I (2011) Theoretical and experimental investigation of gas flows, powder transport and heating in coaxial laser direct metal deposition (dmd) process. J Therm Spray Tech 20:465–478. https://doi.org/10.1007/s11666-010-9539-3

81.

Liu H, Hao J, Yu G, Yang H, Wang L, Han Z (2016) A numerical study on metallic powder flow in coaxial laser cladding. J Appl Fluid Mech 9:2247–2256

82.

Liu C Y, Lin J (2003) Thermal processes of a powder particle in coaxial laser cladding. Opt Laser Technol 35:81–86. https://doi.org/10.1016/s0030-3992(02)00145-7

83.

Ibarra-Medina J, Pinkerton A J (2010) A cfd model of the laser, coaxial powder stream and substrate interaction in laser cladding. Phys Procedia 5:337–346. https://doi.org/10.1016/j.phpro.2010.08.060

84.

Ibarra-Medina J, Pinkerton A J (2011) Numerical investigation of powder heating in coaxial laser metal deposition. Surf Eng 27:754–761. https://doi.org/10.1179/1743294411y.0000000017

85.

Tabernero I, Lamikiz A, Ukar E, López de Lacalle L N, Angulo C, Urbikain G (2010) Numerical simulation and experimental validation of powder flux distribution in coaxial laser cladding. J Mater Process Technol 210:2125–2134. https://doi.org/10.1016/j.jmatprotec.2010.07.036

86.

Tabernero I, Lamikiz A, Martínez S, Ukar E, López de Lacalle L N (2012) Modelling of energy attenuation due to powder flow-laser beam interaction during laser cladding process. J Mater Process Technol 212:516–522. https://doi.org/10.1016/j.jmatprotec.2011.10.019

87.

Devesse W, De Baere D, Guillaume P (2015) Modeling of laser beam and powder flow interaction in laser cladding using ray-tracing. J Laser Appl 27:S29208. https://doi.org/10.2351/1.4906394

88.

El Cheikh H, Courant B, Hascoët J Y, Guillén R (2012a) Prediction and analytical description of the single laser track geometry in direct laser fabrication from process parameters and energy balance reasoning. J Mater Process Technol 212:1832–1839. https://doi.org/10.1016/j.jmatprotec.2012.03.016

89.

El Cheikh H, Courant B, Branchu S, Hascoët J Y, Guillén R (2012b) Analysis and prediction of single laser tracks geometrical characteristics in coaxial laser cladding process. Opt Lasers Eng 50:413–422. https://doi.org/10.1016/j.optlaseng.2011.10.014

90.

El Cheikh H, Courant B, Branchu S, Huang X, Hascoët J Y, Guillén R (2012c) Direct laser fabrication process with coaxial powder projection of 316l steel. geometrical characteristics and microstructure characterization of wall structures. Opt Lasers Eng 50:1779–1784. https://doi.org/10.1016/j.optlaseng.2012.07.002

91.

Labudovic M, Hu D, Kovacevic R (2003) A three dimensional model for direct laser metal powder deposition and rapid prototyping. J Mater Sci 38:35–49. https://doi.org/10.1023/a:1021153513925

92.

de Oliveira U, Ocelík V, De Hosson J T M (2005) Analysis of coaxial laser cladding processing conditions. Surf Coat Technol 197:127–136. https://doi.org/10.1016/j.surfcoat.2004.06.029

93.

Jouvard J, Grevey D F, Lemoine F, Vannes A B (1997) Continuous wave nd:yag laser cladding modeling: a physical study of track creation during low power processing. J Laser Appl 9:43–50. https://doi.org/10.2351/1.4745444

94.

Fathi A, Toyserkani E, Khajepour A, Durali M (2006) Prediction of melt pool depth and dilution in laser powder deposition. J Phys D Appl Phys 39:2613–2623. https://doi.org/10.1088/0022-3727/39/12/022

95.

Lalas C, Tsirbas K, Salonitis K, Chryssolouris G (2007) An analytical model of the laser clad geometry. Int J Adv Manuf Technol 32:34–41. https://doi.org/10.1007/s00170-005-0318-0

96.

Partes K (2009) Analytical model of the catchment efficiency in high speed laser cladding. Surf Coat Technol 204:366–371. https://doi.org/10.1016/j.surfcoat.2009.07.041

97.

Pinkerton A J, Li L (2004) Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances. J Phys D Appl Phys 37:1885–1895. https://doi.org/10.1088/0022-3727/37/14/003

98.

Zhou S, Dai X, Zheng H (2011) Analytical modeling and experimental investigation of laser induction hybrid rapid cladding for ni-based wc composite coatings. Opt Laser Technol 43:613–621. https://doi.org/10.1016/j.optlastec.2010.09.001

99.

Ahsan M N, Pinkerton A J (2011) An analytical-numerical model of laser direct metal deposition track and microstructure formation. Model Simul Mater Sci Eng 19:055003

100.

Cline H E, Anthony T R (1977) Heat treating and melting material with a scanning laser or electron beam. J Appl Phys 48:3895–3900. https://doi.org/10.1063/1.324261

101.

Wang Q, Li J, Gouge M, Nassar AR, Michaleris P, Reutzel EW (2016) Physics-based multivariable modeling and feedback linearization control of melt-pool geometry and temperature in directed energy deposition. J Manuf Sci Eng 139:021013–021013–12. https://doi.org/10.1115/1.4034304

102.

Chaskalovic J (2008) Finite element methods for engineering sciences: theoretical approach and problem solving techniques. Springer, Berlin

103.

Li J, Wang Q, Michaleris P, Reutzel EW, Nassar AR (2017) An extended lumped-parameter model of melt-pool geometry to predict part height for directed energy deposition. J Manuf Sci Eng 139:091016–091016–14. https://doi.org/10.1115/1.4037235

104.

Rosenthal D (1946) The theory of moving sources of heat and its application of metal treatments. Trans ASME 68:849–866

105.

Carslaw H, Jaeger J (1959) Conduction of heat in solids. Oxford University Press, Oxford

106.

Rykalin N, Uglov A, Kokora A (1978) Laser machining and welding. Mir Publishers, Moscow

107.

Elsen M V, Baelmans M, Mercelis P, Kruth J P (2007) Solutions for modelling moving heat sources in a semi-infinite medium and applications to laser material processing. Int J Heat Mass Transfer 50(23):4872–4882. https://doi.org/10.1016/j.ijheatmasstransfer.2007.02.044 MATH

108.

Pinkerton A J, Li L (2004) The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects). Int J Mach Tools Manuf 44:573–584. https://doi.org/10.1016/j.ijmachtools.2004.01.001

109.

Li J, Wang Q, Michaleris P (2018) An analytical computation of temperature field evolved in directed energy deposition. J Manuf Sci Eng 140:101004–101004–13. https://doi.org/10.1115/1.4040621

110.

Tan H, Chen J, Zhang F, Lin X, Huang W (2010) Process analysis for laser solid forming of thin-wall structure. Int J Mach Tools Manuf 50:1–8. https://doi.org/10.1016/j.ijmachtools.2009.10.003

111.

Ning J, Sievers D E, Garmestani H, Liang S Y (2019) Analytical modeling of transient temperature in powder feed metal additive manufacturing during heating and cooling stages. Appl Phys A 125:496. https://doi.org/10.1007/s00339-019-2782-7

112.

Huang Y, Khamesee M B, Toyserkani E (2019) A new physics-based model for laser directed energy deposition (powder-fed additive manufacturing): from single-track to multi-track and multi-layer. Opt Laser Technol 109:584–599. https://doi.org/10.1016/j.optlastec.2018.08.015

113.

Ocelík V, Nenadl O, Palavra A, Hosson J D (2014) On the geometry of coating layers formed by overlap. Surf Coat Technol 242:54–61. https://doi.org/10.1016/j.surfcoat.2014.01.018

114.

Schiaffino S, Sonin A A (1997) Molten droplet deposition and solidification at low weber numbers. Phys Fluids 9:3172–3187. https://doi.org/10.1063/1.869434

115.

Michaleris P (2014) Modeling metal deposition in heat transfer analyses of additive manufacturing processes. Finite Elem Anal Des 86:51–60. https://doi.org/10.1016/j.finel.2014.04.003

116.

Wang L, Felicelli S, Gooroochurn Y, Wang P, Horstemeyer M (2006) Numerical simulation of the temperature distribution and solid phase evolution in the LENS™process. Proceedings of the Solid Freeform Fabrication Symposium, pp 453–463

117.

ESI Group (2019) SYSWELD 2019

118.

Wang L, Felicelli S (2007a) Influence of process parameters on the phase transformation and consequent hardness induced by the LENS™process. Proceedings of TMS Conference, pp 63–72

119.

Wang L, Felicelli S (2007b) Process modeling in laser deposition of multilayer SS410 steel. J Manuf Sci Eng 129:1028–1034. https://doi.org/10.1115/1.2738962

120.

Wang L, Felicelli S D, Craig J E (2007) Thermal modeling and experimental validation in the LENS™process. Proceedings of the Solid Freeform Fabrication Symposium, pp 100–111

121.

Wang L, Felicelli S, Gooroochurn Y, Wang P T, Horstemeyer M F (2008a) Optimization of the LENS^® process for steady molten pool size. Mater Sci Eng A 474:148–156. https://doi.org/10.1016/j.msea.2007.04.119

122.

Wang L, Felicelli S D, Pratt P (2008b) Residual stresses in LENS-deposited AISI 410 Stainless Steel plates. Mater Sci Eng A 496:234–241. https://doi.org/10.1016/j.msea.2008.05.044

123.

Ye R, Smugeresky J E, Zheng B, Zhou Y, Lavernia E J (2006) Numerical modeling of the thermal behavior during the LENS^® process. Mater Sci Eng A 428:47–53. https://doi.org/10.1016/j.msea.2006.04.079

124.

Yin H, Wang L, Felicelli SD (2008) Comparison of two-dimensional and three-dimensional thermal models of the LENS^® process. J Heat Transfer 130:102101–102101–7. https://doi.org/10.1115/1.2953236

125.

Wang L, Felicelli S (2006) Analysis of thermal phenomena in LENS™deposition. Mater Sci Eng A 435-436:625–631. https://doi.org/10.1016/j.msea.2006.07.087

126.

Hofmeister W, Wert M, Smugeresky J, Philliber J A, Griffith M, Ensz M (1999) Investigating solidification with the laser-engineered net shaping (LENS™) process. JOM 51:1–6

127.

Patel CP, Patel R (2012) 3D heat transfer analysis and numerical modeling of LENS™process for thin wall by using Stainless Steel 304. Int J Modern Eng Res 2:1596–1601

128.

Yang Q, Zhang P, Cheng L, Min Z, Chyu M, To A C (2016) Finite element modeling and validation of thermomechanical behavior of Ti-6Al-4V in directed energy deposition additive manufacturing. Add Manuf 12:169–177. https://doi.org/10.1016/j.addma.2016.06.012

129.

Goldak J, Chakravarti A, Bibby M (1984) A new finite element model for welding heat sources. Metall Trans B 15:299–305. https://doi.org/10.1007/BF02667333

130.

Shah K, Khurshid H, ul Haq I, Anwar S, Shah S A (2018) Numerical modelling of pulsed and continuous wave direct laser deposition of Ti-6Al-4V and Inconel 718. Int J Adv Manuf Technol 95:847–860. https://doi.org/10.1007/s00170-017-1224-y

131.

Lampa C, Kaplan A F H, Powell J, Magnusson C (1997) An analytical thermodynamic model of laser welding. J Phys D Appl Phys 30:1293–1299. https://doi.org/10.1088/0022-3727/30/9/004

132.

Lee W S, Yeh G W (1997) The plastic deformation behaviour of AISI 4340 alloy steel subjected to high temperature and high strain rate loading conditions. J Mater Process Technol 71:224–234. https://doi.org/10.1016/S0924-0136(97)00079-4

133.

Yan L, Li W, Chen X, Zhang Y, Newkirk J, Liou F, Dietrich D (2017) Simulation of cooling rate effects on ti-48al-2cr-2nb crack formation in direct laser deposition. JOM 69:586–591. https://doi.org/10.1007/s11837-016-2211-8

134.

Yan L, Zhang Y, Liou F (2018) A conceptual design of residual stress reduction with multiple shape laser beams in direct laser deposition. Finite Elem Anal Des 144:30–37. https://doi.org/10.1016/j.finel.2018.02.004

135.

Khanafer K, Al-Masri A, Aithal S, Deiab I (2019) Multiphysics modeling and simulation of laser additive manufacturing process. Int J Interact Des Manuf (IJIDeM) 13:537–544. https://doi.org/10.1007/s12008-018-0520-6

136.

Gouge M F, Heigel J C, Michaleris P, Palmer T A (2015) Modeling forced convection in the thermal simulation of laser cladding processes. Int J Adv Manuf Technol 79:307–320. https://doi.org/10.1007/s00170-015-6831-x

137.

Heigel J C, Michaleris P, Reutzel E W (2015) Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of ti–6al–4v. Add Manuf 5:9–19. https://doi.org/10.1016/j.addma.2014.10.003

138.

Toyserkani E, Khajepour A, Corbin S (2004) 3-d finite element modeling of laser cladding by powder injection: effects of laser pulse shaping on the process. Opt Lasers Eng 41:849–867. https://doi.org/10.1016/s0143-8166(03)00063-0

139.

Costa L, Vilar R, Réti T, Colaço R, Deus A, Felde I (2005a) Simulation of phase transformations in steel parts produced by laser powder deposition. Mater Sci Forum 473:315–320

140.

Costa L, Vilar R, Reti T, Deus A M (2005b) Rapid tooling by laser powder deposition: process simulation using finite element analysis. Acta Mater 53:3987–3999. https://doi.org/10.1016/j.actamat.2005.05.003

141.

Qian L, Mei J, Liang J, Wu X (2005) Influence of position and laser power on thermal history and microstructure of direct laser fabricated ti–6al–4v samples. Mater Sci Technol 21:597–605. https://doi.org/10.1179/174328405x21003

142.

Neela V, De A (2009) Three-dimensional heat transfer analysis of LENS™process using finite element method. Int J Adv Manuf Technol 45:935–943. https://doi.org/10.1007/s00170-009-2024-9

143.

Mahapatra MM, Li L (2012) Modeling of pulsed-laser superalloy powder deposition using moving distributed heat source. EPD Congress, pp 113–120. https://doi.org/10.1002/9781118359341.ch13

144.

Marimuthu S, Clark D, Allen J, Kamara A, Mativenga P, Li L, Scudamore R (2013) Finite element modelling of substrate thermal distortion in direct laser additive manufacture of an aero-engine component. Proc Inst Mech Eng Part C J Mech Eng Sci 227:1987–1999. https://doi.org/10.1177/0954406212470363

145.

Sammons PM, Bristow DA, Landers RG (2013) Height dependent laser metal deposition process modeling. J Manuf Sci Eng 135:054501–054501–7. https://doi.org/10.1115/1.4025061

146.

Amine T, Newkirk J W, Liou F (2014a) Investigation of effect of process parameters on multilayer builds by direct metal deposition. Appl Therm Eng 73:500–511. https://doi.org/10.1016/j.applthermaleng.2014.08.005

147.

Amine T, Newkirk J W, Liou F (2014b) An investigation of the effect of direct metal deposition parameters on the characteristics of the deposited layers. Case Stud Therm Eng 3:21–34. https://doi.org/10.1016/j.csite.2014.02.002

148.

Hochmann E A, Salehinia I (2018) How convection on the substrate affects the thermal history of the build in direct laser deposition-finite element analysis. Int J Adv Manuf Technol 96:3471–3480. https://doi.org/10.1007/s00170-018-1696-4

149.

Walker T R, Bennett C J, Lee T L, Clare A T (2019) A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited in718. Int J Mech Sci 151:609–621. https://doi.org/10.1016/j.ijmecsci.2018.12.004

150.

Denlinger E R, Michaleris P (2016) Effect of stress relaxation on distortion in additive manufacturing process modeling. Add Manuf 12:51–59. https://doi.org/10.1016/j.addma.2016.06.011

151.

Wang Z, Denlinger E, Michaleris P, Stoica A D, Ma D, Beese A M (2017) Residual stress mapping in Inconel 625 fabricated through additive manufacturing: method for neutron diffraction measurements to validate thermomechanical model predictions. Mater Des 113:169–177. https://doi.org/10.1016/j.matdes.2016.10.003

152.

Peyre P, Aubry P, Fabbro R, Neveu R, Longuet A (2008) Analytical and numerical modelling of the direct metal deposition laser process. J Phys D Appl Phys 025403:41. https://doi.org/10.1088/0022-3727/41/2/025403

153.

Kumar S, Roy S (2008) Development of a theoretical process map for laser cladding using two-dimensional conduction heat transfer model. Comput Mater Sci 41:457–466. https://doi.org/10.1016/j.commatsci.2007.05.002

154.

Hofman J T, de Lange D F, Pathiraj B, Meijer J (2011) Fem modeling and experimental verification for dilution control in laser cladding. J Mater Process Technol 211:187–196. https://doi.org/10.1016/j.jmatprotec.2010.09.007

155.

Hofman J T (2009) Development of an observation and control system for industrial laser cladding. PhD thesis, University of Twente, Netherlands

156.

Birnbaum A, Michopoulos JG, Iliopoulos AP (2016) Simulating geometric and thermal aspects of powder-jet laser additive manufacturing. ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp V01AT02A034–V01AT02A034

157.

Hirt C, Amsden A, Cook J (1974) An arbitrary Lagrangian-Eulerian computing method for all flow speeds. J Comput Phys 14:227–253. https://doi.org/10.1016/0021-9991(74)90051-5 MATH

158.

Bedenko D V, Kovalev O B, Smurov I, Zaitsev A V (2016) Numerical simulation of transport phenomena, formation the bead and thermal behavior in application to industrial dmd technology. Int J Heat Mass Transfer 95:902–912. https://doi.org/10.1016/j.ijheatmasstransfer.2015.12.046

159.

Bedenko D V, Kovalev O B (2013) Modelling of heat and mass transfer in the laser cladding during direct metal deposition. Thermophys Aeromech 20:251–261. https://doi.org/10.1134/S086986431302011X

160.

Tseng Y H, Ferziger J H (2003) A ghost-cell immersed boundary method for flow in complex geometry. J Comput Phys 192:593–623. https://doi.org/10.1016/j.jcp.2003.07.024 MathSciNetMATH

161.

Bennon W, Incropera F (1987a) A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems-i. model formulation. Int J Heat Mass Transfer 30:2161–2170. https://doi.org/10.1016/0017-9310(87)90094-9 MATH

162.

Bennon W, Incropera F (1987b) A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems-ii. application to solidification in a rectangular cavity. Int J Heat Mass Transfer 30:2171–2187. https://doi.org/10.1016/0017-9310(87)90095-0 MATH

163.

Osher S, Fedkiw R (2003) Level set methods and dynamic implicit surfaces. Springer, Berlin

164.

Sethian J A, Smereka P (2003) Level set methods for fluid interfaces. Ann Rev Fluid Mech 35:341–372. https://doi.org/10.1146/annurev.fluid.35.101101.161105 MathSciNetMATH

165.

Han L, Liou F W (2004) Numerical investigation of the influence of laser beam mode on melt pool. Int J Heat Mass Transfer 47:4385–4402. https://doi.org/10.1016/j.ijheatmasstransfer.2004.04.036 MATH

166.

Han L, Liou F W, Musti S (2005a) Thermal behavior and geometry model of melt pool in laser material process. J Heat Transf 127:1005–1014. https://doi.org/10.1115/1.2005275

167.

Han L, Phatak K M, Liou F W (2005b) Modeling of laser deposition and repair process. J Laser Appl 17:89–99. https://doi.org/10.2351/1.1848523

168.

He X, Yu G, Mazumder J (2010) Temperature and composition profile during double-track laser cladding of h13 tool steel. J Phys D Appl Phys 015502:43. https://doi.org/10.1088/0022-3727/43/1/015502

169.

Lee D, Mazumder J (2016) Effects of laser beam spatial distribution on laser-material interaction. Journal of Laser Applications 032003:28. https://doi.org/10.2351/1.4947096

170.

Li S, Xiao H, Liu K, Xiao W, Li Y, Han X, Mazumder J, Song L (2017) Melt-pool motion, temperature variation and dendritic morphology of Inconel 718 during pulsed- and continuous-wave laser additive manufacturing: a comparative study. Mater Des 119:351–360. https://doi.org/10.1016/j.matdes.2017.01.065

171.

Hirt C, Nichols B (1981) Volume of fluid (VOF) method for the dynamics of free boundaries. J Comput Phys 39:201–225. https://doi.org/10.1016/0021-9991(81)90145-5 MATH

172.

Morville S, Carin M, Peyre P, Gharbi M, Carron D, Le Masson P, Fabbro R (2012) 2D longitudinal modeling of heat transfer and fluid flow during multilayered direct laser metal deposition process. J Laser Appl 24:032008. https://doi.org/10.2351/1.4726445

173.

Gan Z, Yu G, He X, Li S (2017) Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of co-base alloy on steel. Int J Heat Mass Transfer 104:28–38. https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.049

174.

Song J, Chew Y, Bi G, Yao X, Zhang B, Bai J, Moon S K (2018) Numerical and experimental study of laser aided additive manufacturing for melt-pool profile and grain orientation analysis. Mater Des 137:286–297. https://doi.org/10.1016/j.matdes.2017.10.033

175.

Lee Y, Nordin M, Babu S, Farson DF (2014) Influence of fluid convection on weld pool formation in laser cladding. Weld J 93:292S–300S

176.

Lee Y, Farson D F (2015) Surface tension-powered build dimension control in laser additive manufacturing process. Int J Adv Manuf Technol 85:1035–1044. https://doi.org/10.1007/s00170-015-7974-5

177.

Lee Y, Farson D F (2016) Simulation of transport phenomena and melt pool shape for multiple layer additive manufacturing. J Laser Appl 28:012006. https://doi.org/10.2351/1.4935711

178.

Dubrov A V, Mirzade F K, Dubrov V D, Panchenko V Y (2018) Heat transfer and thermocapillary convection during the laser deposition of metal powders implemented in additive technologies. Journal of Surface Investigation: X-ray. Synchrotron Neutron Techn 12:54–63. https://doi.org/10.1134/s1027451018010081

179.

Vásquez F, Ramos-Grez J A, Walczak M (2012) Multiphysics simulation of laser-material interaction during laser powder depositon. Int J Adv Manuf Technol 59:1037–1045. https://doi.org/10.1007/s00170-011-3571-4

180.

Sankaranarayanan S, Kar A (1999) Nonlinear effects of laser-plasma interaction on melt-surface temperature. J Phys D Appl Phys 32:777–784. https://doi.org/10.1088/0022-3727/32/7/005

181.

Manvatkar V, De A, DebRoy T (2014) Heat transfer and material flow during laser assisted multi-layer additive manufacturing. J Appl Phys 124905:116. https://doi.org/10.1063/1.4896751

182.

Manvatkar V, De A, DebRoy T (2015) Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process. Mater Sci Technol 31:924–930. https://doi.org/10.1179/1743284714y.0000000701

183.

Mukherjee T, Zhang W, DebRoy T (2017) An improved prediction of residual stresses and distortion in additive manufacturing. Comput Mater Sci 126:360–372. https://doi.org/10.1016/j.commatsci.2016.10.003

184.

Mukherjee T, Zuback J S, Zhang W, DebRoy T (2018) Residual stresses and distortion in additively manufactured compositionally graded and dissimilar joints. Comput Mater Sci 143:325–337. https://doi.org/10.1016/j.commatsci.2017.11.026

185.

Wen S, Shin Y C (2010) Modeling of transport phenomena during the coaxial laser direct deposition process. J Appl Phys 044908:108. https://doi.org/10.1063/1.3474655

186.

De A, Debroy T (2005) Reliable calculations of heat and fluid flow during conduction mode laser welding through optimization of uncertain parameters. Weld J 84:101–112

187.

Peng X, Lin X, Lee D, Yan Y, Wang B (2001) Effects of initial molten pool and marangoni flow on solid melting. Int J Heat Mass Transfer 44:457–470. https://doi.org/10.1016/S0017-9310(00)00070-3 MATH

188.

Wen S, Shin YC (2010) Modeling of the off-axis high power diode laser cladding process. J Heat Transfer 133:031007–031007–10. https://doi.org/10.1115/1.4002447

189.

Wen S, Shin Y C (2011a) Comprehensive predictive modeling and parametric analysis of multitrack direct laser deposition processes. J Laser Appl 23:022003. https://doi.org/10.2351/1.3567962

190.

Wen S, Shin Y C (2011b) Modeling of transport phenomena in direct laser deposition of metal matrix composite. Int J Heat Mass Transfer 54:5319–5326. https://doi.org/10.1016/j.ijheatmasstransfer.2011.08.011 MATH

191.

Katinas C, Liu S, Shin YC (2018) Self-sufficient modeling of single track deposition of Ti-6Al-4V with the prediction of capture efficiency. J Manuf Sci Eng 141:011001–011001–10. https://doi.org/10.1115/1.4041423

192.

ANSYS, Inc (2019) ANSYS® Academic Research CFX, Release 19, 2

193.

Flow Science, Inc (2019) FLOW-3D®, Version 12, 0

194.

Maitre E (2006) Review of numerical methods for free interfaces. Les Houches 27:31

195.

Gibou F, Fedkiw R, Osher S (2018) A review of level-set methods and some recent applications. J Comput Phys 353:82–109. https://doi.org/10.1016/j.jcp.2017.10.006 MathSciNetMATH

196.

Donea J, Huerta A, Ponthot J P, Rodríguez-ferran A (2004) Arbitrary Lagrangian-Eulerian methods. In: Encyclopedia of Computational Mechanics. Wiley. https://doi.org/10.1002/0470091355.ecm009

197.

Bishop CM (2006) Pattern recognition and machine learning (information science and statistics). Springer, Berlin

198.

Kamath C (2016) Data mining and statistical inference in selective laser melting. Int J Adv Manuf Technol 86:1659–1677. https://doi.org/10.1007/s00170-015-8289-2

199.

Zohdi T I (2019) Electrodynamic machine-learning-enhanced fault-tolerance of robotic free-form printing of complex mixtures. Comput Mech 63:913–929. https://doi.org/10.1007/s00466-018-1629-y MathSciNetMATH

Titel: Modeling of the laser powder–based directed energy deposition process for additive manufacturing: a review
verfasst von: Xiaoyi Guan
Yaoyao Fiona Zhao
Publikationsdatum: 12.03.2020
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 5-6/2020
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05027-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5-6/2020

Machining vibration monitoring based on dynamic clamping force measuring in thin-walled components milling

A study on automatic fixture design using reinforcement learning

Research on identification of the corner point of 90° weld based on multi-sensor signal fusion technology

A method for the prediction of cutting force for 5-axis ball-end milling of workpieces with curved surfaces

Laser-arc hybrid welding of 12- and 15-mm thick structural steel

Correction to: Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing

Premium Partner

Marktübersichten