nach oben

Neural Computing and Applications

Erschienen in:

30.03.2020 | Original Article

Multi-cohort intelligence algorithm for solving advanced manufacturing process problems

verfasst von: Apoorva S. Shastri, Aniket Nargundkar, Anand J. Kulkarni, Kamal Kumar Sharma

Erschienen in: Neural Computing and Applications | Ausgabe 18/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In recent years, several nature-inspired optimization methods have been proposed and applied on various classes of problems. The applicability of the recently developed socio-inspired optimization method referred to as multi-cohort intelligence (Multi-CI) is validated by solving real-world problems from manufacturing processes domain, viz. non-traditional manufacturing processes. The problems are minimization of surface roughness for abrasive water jet machining (AWJM), electro-discharge machining (EDM), micro-turning and micro-milling processes. Furthermore, the taper angle for the AWJM, relative electrode wear rate for EDM, burr height and burr thickness for micro-drilling, flank wear for micro-turning process, machining time for micro-milling processes were minimized. It is important to mention that for the micro-drilling and micro-milling process different tool specifications were used. In addition, for EDM the material removal rate was maximized. The performance of the algorithm has been validated by comparing the results with other variations of CI algorithm and several contemporary algorithms such as firefly algorithm, genetic algorithm, simulated annealing and particle swarm optimization. In AWJM, Multi-CI achieved 5–8% and 8–23% minimization for surface roughness and taper angle, respectively. For EDM, 47–80% maximization of material removal rate; 2–13% and 92–98% minimization of surface roughness and relative electrode wear rate, respectively, have been attained. Furthermore, for micro-turning 2% minimization of flank wear and for micro-milling, 2–6% minimization of machining time were attained. For micro-drilling, 24% and 16–34% minimization of burr height and burr thickness were attained. In addition, the performance is compared with the regression and response surface methodology approaches and experimental solutions. The analysis regarding the convergence of all the algorithms is discussed in detail. The contributions in this paper have opened up several avenues for further applicability of the Multi-CI algorithm for solving real-world problems.

Vorheriger Artikel Transforming view of medical images using deep learning

Nächster Artikel A novel trigonometric operation-based q-rung orthopair fuzzy aggregation operator and its fundamental properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Armağan M, Arici AA (2017) Cutting performance of glass-vinyl ester composite by abrasive water jet. Mater Manuf Processes 32(15):1715–1722

Aziz M, Ohnishi O, Onikura H (2012) Innovative micro hole machining with minimum burr formation by the use of newly developed micro compound tool. J Manuf Process 14(3):224–232

Bao W, Chen P, Tansel I, Reen NS, Yang S, Rincon D (2003) Selection of optimal cutting conditions by using the genetically optimized neural network system (GONNS). In: Kaynak O, Alpaydin E, Oja E, Xu L (eds) Artificial neural networks and neural information processing—ICANN/ICONIP 2003. ICANN 2003, ICONIP 2003. Lecture notes in computer science, vol 2714. Springer, Berlin

Bhattacharyya B, Gangopadhyay S, Sarkar BR (2007) Modelling and analysis of EDMed job surface integrity. J Mater Process Technol 189(1–3):169–177

Camposeco-Negrete C (2019) Prediction and optimization of machining time and surface roughness of AISI O1 tool steel in wire-cut EDM using robust design and desirability approach. Int J Adv Manuf Technol 103(5–8):1–12

Civicioglu P (2013) Backtracking search optimization algorithm for numerical optimization problems. Appl Math Comput 219(15):8121–8144MathSciNetMATH

Dang XP (2018) Constrained multi-objective optimization of EDM process parameters using kriging model and particle swarm algorithm. Mater Manuf Processes 33(4):397–404

Das MK, Kumar K, Barman TK, Sahoo P (2014) Application of artificial bee colony algorithm for optimization of MRR and surface roughness in EDM of EN31 tool steel. Procedia Mater Sci 6:741–751

Dewangan S, Gangopadhyay S, Biswas CK (2015) Multi-response optimization of surface integrity characteristics of EDM process using grey-fuzzy logic-based hybrid approach. Eng Sci Technol Int J 18(3):361–368

10.

Dhanawade A, Kumar S, Kalmekar RV (2016) Abrasive water jet machining of carbon epoxy composite. Def Sci J 66(5):522–528

11.

Durairaj M, Gowri S (2013) Parametric optimization for improved tool life and surface finish in micro turning using genetic algorithm. Procedia Eng 64:878–887

12.

Eberhart R, Kennedy J (1995) A new optimizer using particle swarm theory. In: MHS’95. Proceedings of the sixth international symposium on micro machine and human science. IEEE, pp 39–43

13.

Ganapathy S, Balasubramanian P, Senthilvelan T, Kumar R (2019) Multi-response optimization of machining parameters in EDM using square-shaped nonferrous electrode. In: Vijay Sekar K, Gupta M, Arockiarajan A (eds) Advances in manufacturing processes. Springer, Singapore, pp 287–295

14.

Gopalakannan S, Senthilvelan T (2014) Optimization of machining parameters for EDM operations based on central composite design and desirability approach. J Mech Sci Technol 28(3):1045–1053

15.

Gopalsamy BM, Mondal B (2009) Ghosh S (2009) Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA. Int J Adv Manuf Technol 45:1068. https://doi.org/10.1007/s00170-009-2054-3CrossRef

16.

Gostimirovic M, Pucovsky V, Sekulic M, Rodic D, Pejic V (2019) Evolutionary optimization of jet lag in the abrasive water jet machining. Int J Adv Manuf Technol 101(9–12):3131–3141

17.

Guest Editor Tugrul Özel (2009) Editorial: special section on micromanufacturing processes and applications. Mater Manuf Process 24(12):1235. https://doi.org/10.1080/10426910903129349CrossRef

18.

Gulia V, Nargundkar A (2019) Optimization of process parameters of abrasive water jet machining using variations of cohort intelligence (CI). In: Malik H, Srivastava S, Sood Y, Ahmad A (eds) Applications of artificial intelligence techniques in engineering. Springer, Singapore, pp 467–474

19.

Guo YB, Dornfeld DA (2000) Finite element modeling of burr formation process in drilling 304 stainless steel. J Manuf Sci Eng 122(4):612–619

20.

Hatamlou A (2013) Black hole: a new heuristic optimization approach for data clustering. Inf Sci 222:175–184MathSciNet

21.

Huan TT, Kulkarni AJ, Kanesan J, Huang CJ, Abraham A (2017) Ideology algorithm: a socio-inspired optimization methodology. Neural Comput Appl 28(1):845–876

22.

Igel C, Hansen N, Roth S (2007) Covariance matrix adaptation for multi-objective optimization. Evol Comput 15(1):1–28

23.

Jagadeesha T (2015) Non traditional machining. Mechanical Engineering Department, National Institute of Technology, Calicut

24.

Jain NK, Jain VK, Deb K (2007) Optimization of process parameters of mechanical type advanced machining processes using genetic algorithms. Int J Mach Tools Manuf 47(6):900–919

25.

Jain VK (2008) Advanced (non-traditional) machining processes. In: Davim JP (ed) Machining. Springer, London, pp 299–327

26.

Kale IR, Kulkarni AJ (2018) Cohort intelligence algorithm for discrete and mixed variable engineering problems. Int J Parallel Emergent Distrib Syst 33(6):627–662

27.

Karaboga D (2005) An idea based on honey bee swarm for numerical optimization, vol 200, pp 1–10. Technical report-tr06, Erciyesuniversity, Engineering Faculty, Computer Engineering Department

28.

Kechagias J, Petropoulos G, Vaxevanidis N (2012) Application of Taguchi design for quality characterization of abrasive water jet machining of TRIP sheet steels. Int J Adv Manuf Technol 62(5–8):635–643

29.

Kilickap E (2010) Modeling and optimization of burr height in drilling of Al-7075 using Taguchi method and response surface methodology. Int J Adv Manuf Technol 49(9–12):911–923

30.

Kirkpatrick S, Gelatt CD, Vecchi MP (1983) Optimization by simulated annealing. Science 220(4598):671–680MathSciNetMATH

31.

Kolli M, Kumar A (2015) Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method. Eng Sci Technol Int J 18(4):524–535

32.

Kulkarni AJ, Shabir H (2016) Solving 0–1 knapsack problem using cohort intelligence algorithm. Int J Mach Learn Cybernet 7(3):427–441

33.

Kulkarni AJ, Durugkar IP, Kumar M (2013) Cohort intelligence: a self supervised learning behavior. In: 2013 IEEE international conference on systems, man, and cybernetics. IEEE, pp 1396–1400

34.

Kumar K, Singh V, Katyal P, Sharma N (2019) EDM μ-drilling in Ti-6Al-7Nb: experimental investigation and optimization using NSGA-II. Int J Adv Manuf Technol 104(5–8):1–12

35.

Kumar SL (2019) Measurement and uncertainty analysis of surface roughness and material removal rate in micro turning operation and process parameters optimization. Measurement 140:538–547

36.

Kumar SL, Jerald J, Kumanan S, Aniket N (2014) Process parameters optimization for micro end-milling operation for CAPP applications. Neural Comput Appl 25(7–8):1941–1950

37.

Liang JJ, Qin AK, Suganthan PN, Baskar S (2006) Comprehensive learning particle swarm optimizer for global optimization of multimodal functions. IEEE Trans Evol Comput 10(3):281–295

38.

Miyake T, Yamamoto A, Kitajima K, Tanaka Y, Takazawa K (1991) Study on mechanism of burr formation in drilling: deformation of material during burr formation. J Jpn Soc Precis Eng 57(3):485–490

39.

Momber AW, Kovacevic R (2012) Principles of abrasive water jet machining. Springer, BerlinMATH

40.

Muthuramalingam T, Mohan B (2015) A review on influence of electrical process parameters in EDM process. Arch Civ Mech Eng 15(1):87–94

41.

Palani S, Natarajan U, Chellamalai M (2013) On-line prediction of micro-turning multi-response variables by machine vision system using adaptive neuro-fuzzy inference system (ANFIS). Mach Vis Appl 24(1):19–32

42.

Pansari S, Mathew A, Nargundkar A (2019) An investigation of burr formation and cutting parameter optimization in micro-drilling of Brass C-360 using image processing. In: Proceedings of the 2nd international conference on data engineering and communication technology. Springer, Singapore, pp 289–302

43.

Patankar NS, Kulkarni AJ (2018) Variations of cohort intelligence. Soft Comput 22(6):1731–1747

44.

Qin AK, Suganthan PN (2005) Self-adaptive differential evolution algorithm for numerical optimization. In: 2005 IEEE congress on evolutionary computation, vol 2. IEEE, pp 1785–1791

45.

Rahman AA, Mamat A, Wagiman A (2009) Effect of machining parameters on hole quality of micro drilling for brass. Mod Appl Sci 3(5):221–230

46.

Rahman M, Kumar AS, Prakash JRS (2001) Micro milling of pure copper. J Mater Process Technol 116(1):39–43

47.

Robinson GM, Jackson MJ (2005) A review of micro and nano machining from a materials perspective. J Mater Process Technol 167:316–337

48.

Saravanan M, Ramalingam D, Manikandan G, Kaarthikeyen RR (2012) Multi objective optimization of drilling parameters using genetic algorithm. Procedia Eng 38:197–207

49.

Schwartzentruber J, Narayanan C, Papini M, Liu HT (2016) Optimized abrasive waterjet nozzle design using genetic algorithms. In: The 23rd international conference on water jetting, at Seattle, USA

50.

Shanmugam DK, Nguyen T, Wang J (2008) A study of delamination on graphite/epoxy composites in abrasive waterjet machining. Compos A Appl Sci Manuf 39(6):923–929

51.

Shastri AS, Kulkarni AJ (2018) Multi-cohort intelligence algorithm: an intra-and inter-group learning behavior based socio-inspired optimisation methodology. Int J Parallel Emergent Distrib Syst 33(6):675–715

52.

Shastri AS, Thorat EV, Kulkarni AJ, Jadhav PS (2019) Optimization of constrained engineering design problems using cohort intelligence method. In: Proceedings of the 2nd international conference on data engineering and communication technology. Springer, Singapore, pp 1–11

53.

Shikata H, DeVries MF, Wu SM, Merchant ME (1980) An experimental investigation of sheet metal drilling. CIRP Ann 29(1):85–88

54.

Shukla R, Singh D (2017) Experimentation investigation of abrasive water jet machining parameters using Taguchi and Evolutionary optimization techniques. Swarm Evolut Comput 32:167–183

55.

Shukla R, Singh D (2017) Selection of parameters for advanced machining processes using firefly algorithm. Eng Sci Technol Int J 20(1):212–221

56.

Simon D (2008) Biogeography-based optimization. IEEE Trans Evol Comput 12(6):702–713

57.

Sofuoğlu MA, Çakır FH, Kuşhan MC, Orak S (2019) Optimization of different non-traditional turning processes using soft computing methods. Soft Comput 23(13):5213–5231

58.

Straka LU, Hašová S (2018) Prediction of the heat-affected zone of tool steel EN X37CrMoV5-1 after die-sinking electrical discharge machining. Proc Inst Mech Eng Part B J Eng Manuf 232(8):1395–1406

59.

Takeyama H, Kato S, Ishiwata S, Takeji H (1993) Study on oscillatory drilling aiming at prevention of burr. J Jpn Soc Precis Eng 59(10):137–142

60.

Teimouri R, Baseri H (2014) Optimization of magnetic field assisted EDM using the continuous ACO algorithm. Appl Soft Comput 14:381–389

61.

Tzeng CJ, Chen RY (2013) Optimization of electric discharge machining process using the response surface methodology and genetic algorithm approach. Int J Precis Eng Manuf 14(5):709–717

62.

Yang SH, Srinivas J, Mohan S, Lee DM, Balaji S (2009) Optimization of electric discharge machining using simulated annealing. J Mater Process Technol 209(9):4471–4475

63.

Yang XS, Deb S (2009) Cuckoo search via Lévy flights. In: 2009 World congress on nature & biologically inspired computing (NaBIC). IEEE, pp 210–214

64.

Yang XS (2009) Firefly algorithms for multimodal optimization. In: International symposium on stochastic algorithms. Springer, Berlin, pp 169–178

65.

Zain AM, Haron H, Sharif S (2010) Application of GA to optimize cutting conditions for minimizing surface roughness in end milling machining process. Expert Syst Appl 37(6):4650–4659

66.

Zain AM, Haron H, Sharif S (2011) Optimization of process parameters in the abrasive waterjet machining using integrated SA–GA. Appl Soft Comput 11(8):5350–5359

67.

Zheng LJ, Wang CY, Fu LY, Yang LP, Qu YP, Song YX (2012) Wear mechanisms of micro-drills during dry high speed drilling of PCB. J Mater Process Technol 212(10):1989–1997

Titel: Multi-cohort intelligence algorithm for solving advanced manufacturing process problems
verfasst von: Apoorva S. Shastri
Aniket Nargundkar
Anand J. Kulkarni
Kamal Kumar Sharma
Publikationsdatum: 30.03.2020
Verlag: Springer London
Erschienen in: Neural Computing and Applications / Ausgabe 18/2020
Print ISSN: 0941-0643
Elektronische ISSN: 1433-3058
DOI: https://doi.org/10.1007/s00521-020-04858-y

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 18/2020

An event recommendation model using ELM in event-based social network

Predicting hydrogen storage capacity of metal–organic frameworks using group method of data handling

Urban traffic flows forecasting by recurrent neural networks with spiral structures of layers

An experimental evaluation of extreme learning machines on several hardware devices

Special issue on extreme learning machine and deep learning networks

Perceptual image quality using dual generative adversarial network

Premium Partner