nach oben

Erschienen in:

01.06.2012 | Original Paper

Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers

verfasst von: Hanieh Kargarzadeh, Ishak Ahmad, Ibrahim Abdullah, Alain Dufresne, Siti Yasmine Zainudin, Rasha M. Sheltami

Erschienen in: Cellulose | Ausgabe 3/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Cellulose nanocrystals (CNC) were first isolated from kenaf bast fibers and then characterized. The raw fibers were subjected to alkali treatment and bleaching treatment and subsequent hydrolysis with sulfuric acid. The influence of the reaction time on the morphology, crystallinity, and thermal stability of CNC was investigated. Fourier transform infrared spectroscopy showed that lignin and hemicellulose were almost entirely removed during the alkali and bleaching treatments. The morphology and dimensions of the fibers and acid-released CNC were characterized by field emission scanning electron microscopy and transmission electron microscopy. X-Ray diffraction analysis revealed that the crystallinity first increases upon hydrolysis and then decreases after long durations of hydrolysis. The optimal extraction time was found to be around 40 min during hydrolysis at 45 °C with 65% sulfuric acid. The thermal stability was found to decrease as the hydrolysis time increased. The electrophoretic mobility of the CNC suspensions was measured using the zeta potential, and it ranged from −8.7 to −95.3 mV.

Vorheriger Artikel Cellulosic nanoparticles from alfa fibers (Stipa tenacissima): extraction procedures and reinforcement potential in polymer nanocomposites

Nächster Artikel Enhancing the effectiveness of a laccase–TEMPO treatment has a biorefining effect on sisal cellulose fibres

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ahmad I, Mosadeghzad Z, Daik R, Ramli A (2008) The effect of alkali treatment and filler size on the properties of sawdust/UPR composites based on recycled PET wastes. J Appl Polym Sci 109:3651–3658CrossRef

Alemdar A, Sain M (2008) Isolation and characterization of nanofibres from agricultural residues-wheat straw and soy hulls. Bioresor Technol 99:1664–1671CrossRef

Angellier H, Putaux JL, Molina-Boisseau S, Dupeyre D, Dufresne A (2005) Starch nanocrystal fillers in a acrylic polymer matrix. Macromol Symp 221:95–104CrossRef

Araki J, Wada M, Kuga S, Okano T (1998) Low properties of microcrystalline cellulose suspension prepared by acid treatment of native cellulose. Colloid Surface A 142:75–82CrossRef

Ashori A, Jalaluddin H, Raverty WD, Mohd Nor MY (2006) Chemical and morphological characteristics of Malaysia Cultivated kenaf (Hibiscuse cannabinus) fiber. Polym Plast Technol 45:131–134CrossRef

Beck-Candanedo S, Roman M, Gray DG (2005) Effect of reaction conditions on the properties and behavior of wood cellulose nanocrystal suspensions. Biomacromolecules 6:1048–1054CrossRef

Bendahou A, Habibi Y, Kaddami H, Dufresne A (2009) Physico-chemical characterization of palm from Phoenix Dactylifera–L, preparation of cellulose whiskers and natural rubber—based nanocomposites. J Biobas Mat Bioenergy 3:81–90CrossRef

Bismarck A, Mishra S, Lampke T (2005) Plant fiber as reinforcement for green composites. In: Mohanty AK, Misra M, Drzal LT (eds) Natural fiber biopolymers, and biocomposites. CRC Press, Boca Raton, vol 2, pp 37–108

Bledzki AK, Gassan J (1999) Composites reinforced with cellulose based fiber. Prog Polym Sci 24:221–274CrossRef

Bondeson D, Mathew A, Oksman K (2006) Optimization of the isolation of nanocrystal from microcrystalline cellulose by acid hydrolysis. Cellulose 13:171–180CrossRef

Chen Y, Liu C, Chang PR, Cao X, Anderson DP (2009) Bionanocomposites based on pea starch and cellulose nanowhiskers hydrolyzed from pea hull fibre: effect of hydrolysis time. Carbohyd Polym 76:607–615CrossRef

Cherian BM, Leão AL, de Souza SF, Thomas S, Pothan LA, Kottaisamy M (2010) Isolation of nanocellulose from pineapple leaf fibres by steam explosion. Carbohyd Polym 81:720–725CrossRef

de Souze Lima MM, Borsali R (2004) Rodlike cellulose microcrystals: structure, properties, and applications. Macromol Rapid Comm 25:771–787CrossRef

Dong XM, Revol JF, Gray DG (1998) Effect of microcrystallite preparation conditions on the formation of colloid crystals of cellulose. Cellulose 5:19–32CrossRef

Dufresne A (2008) Cellulose-based composites and nanocomposites. In: Gandini A, Belgacem MN (eds) Monomers, polymers and composites from renewable resources. Elsevier, Oxford, vol 19, pp 401–418

Elanthikkal S, Gopalakrishnapanicker U, Varghese S, Guthrie JT (2010) Cellulose microfibres produced from banana plant wastes: isolation and characterization. Carbohyd Polym 80:852–859CrossRef

Fahma F, Iwamoto S, Hori N, Iwata T, Takemura A (2010) Isolation, preparation, and characterization of nanofibers from oil palm empty-fruit-bunch (OPEFB). Cellulose 17:977–985CrossRef

Fahma F, Iwamoto S, Hori N, Iwata T, Takemura A (2011) Effect of pre-acid-hydrolysis treatment on morphology and properties of cellulose nanowhiskers from coconut husk. Cellulose 18:443–450CrossRef

Favier V, Chanzy H, Cavaille JY (1995) Polymer nanocomposites reinforced by cellulose whiskers. Macromolecules 28:6365–6367CrossRef

Garcia de Rodriguez NLG, Thielemans W, Dufresne A (2006) Sisal cellulose whiskers reinforced poly(vinyl acetate) nanocomposite. Cellulose 13:261–270CrossRef

Hunter RJ (1981) Zeta potential in colloids science. Academic Press, New York

Jonoobi M, Harun J, Shakeri A, Misra M, Oksman K (2009) Chemical composition, crystallinity, and thermal degradation of bleached and unbleached kenaf bast (Hibiscus cannabinus) pulp and nanofibres. Bioresour 4:626–639

Li R, Fei J, Cai Y, Li Y, Feng J, Yao J (2009) Cellulose whiskers extracted from mulberry: A novel biomass production. Carbohyd Polym 76:94–99CrossRef

Lu P, Hsieh YL (2010) Preparation and properties of cellulose nanocrystals: rods, spheres, and network. Carbohyd Polym 82:329–336CrossRef

Martínez-Sanz M, Lopez-Rubio A, Lagaron JM (2011) Optimization of the nanofabrication by acid hydrolysis of bacterial cellulose nanowhiskers. Carbohyd Polym 85:228–236CrossRef

Mohd Edeerozey AM, Hazizan MA, Azhar AB, Zainal Ariffin MI (2007) Chemical modification of kenaf fibers. Mater Lett 61:2023–2025CrossRef

Morán JI, Alvarez VA, Cyras VP, Vázquez A (2008) Extraction of cellulose and preparation of nanocellulose from sisal fibres. Cellulose 15:149–159CrossRef

Pääkkö M, Ankerfors M, Kosonen H, Nykänen A, Ahola S, Österberg M, Ruokolainen J, Laine J, Larsson PT, Ikkala O, Lindström T (2007) Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules 8:1934–1941CrossRef

Roman M, Winter WT (2004) Effect of sulphated groups from sulphuric acid hydrolysis on the thermal degradation behavior of bacterial cellulose. Biomacromolecules 5:1048–1054CrossRef

Rosa MF, Medeiros ES, Malmonge JA, Gregorski KS, Wood DF, Mattoso LHC, Glenn G, Orts WJ, Imam SH (2010) Cellulose nanowhiskers from coconut husk fibres: effect of preparation conditions on their thermal and morphological behavior. Carbohyd Polym 81:83–92CrossRef

Rowell RM, Han JS, Rowell JS (2000) Characterization and factors effecting fiber properties. In: Frollini E, Leão AL, Mattoso LHC (eds) Natural polymers and agrofibers composites. Embrapa Instrumentação Agropecuária, São Carlos, pp 115–134

Sain M, Panthapulakkal S (2006) Bioprocess preparation of wheat straw fibres and their characterization. Ind Crops Prod 2:1–8CrossRef

Segal L, Greely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using X-ray diffractometer. Text Res J 29:786–794CrossRef

Shebani AN, van Reenen AJ, Meincken M (2008) The effect of wood extractives on the thermal stability of different wood species. Thermochim Acta 471:43–50CrossRef

Siqueira G, Abdillahi H, Bras J, Dufresne A (2010) High reinforcing capability cellulose nanocrystals extracted from syngonanthus nitens (Capim Dourado). Cellulose 17:289–298CrossRef

Swingle RS, Urias AR, Doyle JC, Voigt RL (1978) Chemical composition of kenaf forage and its digestibility by lambs and in vitro. J Anim Sci 46:1346–1350

Troedec M, Sedan D, Peyratout C, Bonnet J, Smith A, Guinebretiere R, Gloaguen V, Krausz P (2008) Influence of various chemical treatment on the composition and structure of hemp fibres. Compos Part A 39:514–522CrossRef

Wang N, Ding E, Cheng R (2007) Thermal degradation behavior of spherical cellulose nanocrystals with sulfate groups. Polymer 48:3486–3493CrossRef

Yang HP, Yan R, Hen HP, Lee DH, Zheng CG (2007) Characteristics of hemicelluloses, cellulose and lignin pyrolysis. Fuel 86:1781–1788CrossRef

Zuluaga R, Putaux JL, Velez J, Mondragon I, Gañán P (2009) Cellulose microfibrils from banana rachis: effect of alkaline treatments on structural and morphological features. Carbohyd Polym 76:51–59CrossRef

Titel: Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers
verfasst von: Hanieh Kargarzadeh
Ishak Ahmad
Ibrahim Abdullah
Alain Dufresne
Siti Yasmine Zainudin
Rasha M. Sheltami
Publikationsdatum: 01.06.2012
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 3/2012
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-012-9684-6

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 3/2012

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Synthesis and characterization of a novel polymeric hydrogel based on hydroxypropyl methyl cellulose grafted with polyacrylamide

Molecular simulation study with complex models of the carbohydrate binding module of Cel6A and the cellulose Iα crystal

Erratum to: About the structure of cellulose: debating the Lindman hypothesis

Enhancing the effectiveness of a laccase–TEMPO treatment has a biorefining effect on sisal cellulose fibres

Susceptibility of never-dried and freeze-dried bacterial cellulose towards esterification with organic acid