nach oben

Journal of Materials Engineering and Performance

Erschienen in:

02.03.2020

Effect of Low-Temperature Austempering and Quenching and Partitioning Treatments on Adhesive Wear Resistance of High-Silicon Multiphase Steels

verfasst von: Pedro Gabriel Bonella de Oliveira, Ricardo Tadeu Junior Aureliano, Luiz Carlos Casteletti, André Itman Filho, Amadeu Lombardi Neto, George Edward Totten

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The quest for vehicle safety improvement with weight reduction and consequently lower fuel consumption led the automotive industry to begin research into the third generation of advanced high-strength steels. These steels present complex microstructures, composed of martensite, bainite and stable retained austenite. Two of the main treatments for obtaining these microstructures are the low-temperature austempering and quenching and partitioning (Q&P). The objective of this work is to evaluate the microhardness and adhesive wear performance of C-Si-Mn and C-Si-Mn-Nb steels submitted to the treatments mentioned above. Both austempering and the partitioning steps were conducted at Ms+50 °C. Treatment times were 1 and 3 h for austempering and 10, 30 and 60 min for Q&P. Results show that niobium addition promotes improvement in wear performance despite inferior levels of austenite stabilization and changes in the bainite morphology.

Vorheriger Artikel Production and Characterization of Boride and Carbide Layers on AISI 15B30 Steel

Nächster Artikel Quantitative Analysis of Microstructural Refinement in Simulated Carburized Microstructures

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

D.K. Matlock and J.G. Speer, Third Generation of AHSS: Microstructure Design Concepts, ed. by A. Haldar, S. Suwas, D. Bhattacharjee. Microstructure and Texture in Steels (Springer, London, 2009), pp. 185–205CrossRef

E. De Moor and J.G. Speer, Bainitic and Quenching and Partitioning Steels, in Automotive Steels, Elsevier, 2017, p 289-316. https://doi.org/10.1016/b978-0-08-100638-2.00010-9

F.G. Caballero and H.K.D.H. Bhadeshia, Very Strong Bainite, Curr. Opin. Solid State Mater. Sci., 2004, 8(3-4), p 251-257CrossRef

J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth, Carbon Partitioning into Austenite after Martensite Transformation, Acta Mater., 2003, 51(9), p 2611-2622CrossRef

K. Hausmann, D. Krizan, K. Spiradek-Hahn, A. Pichler, and E. Werner, The Influence of Nb on Transformation Behavior and Mechanical Properties of TRIP-Assisted Bainitic-Ferritic Sheet Steels, Mater. Sci. Eng. A, 2013, 588, p 142-150. https://doi.org/10.1016/j.msea.2013.08.023 CrossRef

X.D. Wang, N. Zhong, Y.H. Rong, T.Y. Hsu, Z.Y. Xu, and L. Wang, Novel Ultrahigh-Strength Nanolath Martensitic Steel by Quenching–Partitioning–Tempering Process, J. Mater. Res., 2009, 24(1), p 260-267. https://doi.org/10.1557/jmr.2009.0029 CrossRef

N. Zhong, Q. Wu, Y. Yin, and X. Wang, Microstructual Evolution of a Medium Carbon Advanced High Strength Steel Heat-Treated by Quenching–Partitioning Process, Steel Res. Int., 2015, 86(3), p 252-256. https://doi.org/10.1002/srin.201400064 CrossRef

S. Sharma, S. Sangal, and K. Mondal, Wear Behavior of Newly Developed Bainitic Wheel Steels, J. Mater. Eng. Perform., 2015, 24(2), p 999-1010CrossRef

C. Wang, X. Li, Y. Chang, S. Han, and H. Dong, Comparison of Three-Body Impact Abrasive Wear Behaviors for Quenching–Partitioning–Tempering and Quenching–Tempering 20Si₂Ni₃ Steels, Wear, 2016, 362-363, p 121-128. https://doi.org/10.1016/j.wear.2016.05.026 CrossRef

10.

A. Leiro, A. Kankanala, E. Vuorinen, and B. Prakash, Tribological Behaviour of Carbide-Free Bainitic Steel under Dry Rolling/Sliding Conditions, Wear, 2011, 273(1), p 2-8. https://doi.org/10.1016/j.wear.2011.03.025 CrossRef

11.

A.M. Gola, M. Ghadamgahi, and S.W. Ooi, Microstructure Evolution of Carbide-Free Bainitic Steels under Abrasive Wear Conditions, Wear, 2017, 376-377, p 975-982. https://doi.org/10.1016/j.wear.2016.12.038 CrossRef

12.

J. Lu, H. Yu, P. Kang, X. Duan, and C. Song, Study of Microstructure, Mechanical Properties and Impact-Abrasive Wear Behavior of Medium-Carbon Steel Treated by Quenching and Partitioning (Q&P) Process, Wear, 2018, 414-415, p 21-30. https://doi.org/10.1016/j.wear.2018.07.026 CrossRef

13.

E384-17, Standard Test Method for Microindentation Hardness of Materials, ASTM B. Stand., 2017

14.

B.D. Cullity and S.R. Stock, Elements of X-Ray Diffraction, 3rd ed., Prentice Hall, Upper Saddle River, 2001

15.

A.Z. Hanzaki, P.D. Hodgson, and S. Yue, The Influence of Bainite on Retained Austenite Characteristics in Si-Mn TRIP Steels, ISIJ Int., 1995, 35(1), p 79-85. https://doi.org/10.2355/isijinternational.35.79 CrossRef

16.

K.L.L. Rutherford and I.M.M. Hutchings, Theory and Application of a Micro-Scale Abrasive Wear Test, J. Test. Eval., 1997, 25(2), p 250. https://doi.org/10.1520/jte11487j CrossRef

17.

K.L. Rutherford and I.M. Hutchings, A Micro-Abrasive Wear Test, with Particular Application to Coated Systems, Surf. Coatings Technol., 1996, 79(1-3), p 231-239. https://doi.org/10.1016/0257-8972(95)02461-1 CrossRef

18.

M. Militzer, F. Fazeli, and T. Jia, Effect of Niobium and Molybdenum on Phase Transformations in Advanced Low-Carbon Steels, in Proceedings of the First International Symposium on Fundamentals and Applications of Mo and Nb Alloying in High Performance Steels., ed. by H. Mohrbacher, (Taipei, Taiwan), CBMM, IMOA and TMS, 2014, p 23-36

19.

B. V. Kovacs, On the Terminology and Structure of ADI, in Ninety-Eighth Annual Meeting of the American Foundrymen’s Society, 1994, p 417-420

20.

F.G. Caballero and C. Garcia-Mateo, Phase Transformations in Advanced Bainitic Steels, Phase Transform. Steels, 2012, 2, p 271-294CrossRef

21.

H. Hu, G. Xu, L. Wang, Z. Xue, Y. Zhang, and G. Liu, The Effects of Nb and Mo Addition on Transformation and Properties in Low Carbon Bainitic Steels, Mater. Des., 2015, 84, p 95-99. https://doi.org/10.1016/j.matdes.2015.06.133 CrossRef

22.

K.-I. Sugimoto, T. Muramatsu, S.-I. Hashimoto, and Y. Mukai, Formability of Nb Bearing Ultra High-Strength TRIP-Aided Sheet Steels, J. Mater. Process. Technol., 2006, 177(1-3), p 390-395. https://doi.org/10.1016/j.jmatprotec.2006.03.186 CrossRef

23.

G. Gao, H. Zhang, X. Gui, Z. Tan, and B. Bai, Tempering Behavior of Ductile 1700 MPa Mn-Si-Cr-C Steel Treated by Quenching and Partitioning Process Incorporating Bainite Formation, J. Mater. Sci. Technol., 2015, 31(2), p 199-204. https://doi.org/10.1016/j.jmst.2014.07.010 CrossRef

24.

M.C. Somani, D.A. Porter, L.P. Karjalainen, and R.D.K. Misra, On Various Aspects of Decomposition of Austenite in a High-Silicon Steel During Quenching and Partitioning, Metall. Mater. Trans. A, 2014, 45(3), p 1247-1257. https://doi.org/10.1007/s11661-013-2053-8 CrossRef

25.

A. Navarro-López, J. Hidalgo, J. Sietsma, and M.J. Santofimia, Characterization of Bainitic/Martensitic Structures Formed in Isothermal Treatments below the M s Temperature, Mater. Charact., 2017, 128, p 248-256. https://doi.org/10.1016/j.matchar.2017.04.007 CrossRef

26.

J.G. Speer, Phase Transformations in Quenched and Partitioned Steels, Phase Transform. Steels, 2012, 2, p 247-270CrossRef

27.

X. Huang, W. Liu, Y. Huang, H. Chen, and W. Huang, Effect of a Quenching-Long Partitioning Treatment on the Microstructure and Mechanical Properties of a 0.2C% Bainitic Steel, J. Mater. Process. Technol., 2015, 222, p 181-187. https://doi.org/10.1016/j.jmatprotec.2015.03.010 CrossRef

28.

J.G. Speer, A.L. Araujo, D.K. Matlock, and E. De Moor, Nb-Microalloying in next-Generation Flat-Rolled Steels: An Overview, in Materials Science Forum, 2017, p 1834-1840

29.

H.Y. Dong, K.M. Wu, X.L. Wang, T.P. Hou, and R. Yan, A Comparative Study on the Three-Body Abrasive Wear Performance of Q&P Processing and Low-Temperature Bainitic Transformation for a Medium-Carbon Dual-Phase Steel, Wear, 2018, 402-403, p 21-29. https://doi.org/10.1016/j.wear.2018.01.009 CrossRef

30.

H. Hu, G. Xu, M. Zhou, and Q. Yuan, Effect of Mo Content on Microstructure and Property of Low-Carbon Bainitic Steels, Metals (Basel), 2016, 6(8), p 173. https://doi.org/10.3390/met6080173 CrossRef

31.

M. Shah and S. Das Bakshi, Three-Body Abrasive Wear of Carbide-Free Bainite, Martensite and Bainite-Martensite Structure of Similar Hardness, Wear, 2018, 402-403, p 207-215. https://doi.org/10.1016/j.wear.2018.02.020 CrossRef

32.

L.C. Chang, The Rolling/Sliding Wear Performance of High Silicon Carbide-Free Bainitic Steels, Wear, 2005, 258(5-6), p 730-743. https://doi.org/10.1016/j.wear.2004.09.064 CrossRef

33.

F. Hu, K.M. Wu, and P.D. Hodgson, Effect of Retained Austenite on Wear Resistance of Nanostructured Dual Phase Steels, Mater. Sci. Technol., 2016, 32(1), p 40-48. https://doi.org/10.1179/1743284715Y.0000000061 CrossRef

34.

E. Vuorinen, D. Pino, J. Lundmark, and B. Prakash, Wear Characteristic of Surface Hardened Ausferritic Si-Steel, J. Iron Steel Res. Int., 2007, 14(5), p 245-248. https://doi.org/10.1016/S1006-706X(08)60087-4 CrossRef

35.

A. Sundström, J. Rendón, and M. Olsson, Wear Behaviour of Some Low Alloyed Steels under Combined Impact/Abrasion Contact Conditions, Wear, 2001, 250(1-12), p 744-754. https://doi.org/10.1016/S0043-1648(01)00712-8 CrossRef

36.

A. Itman Filho, R.V. da Silva, P.G.B. de Oliveira, J.B.R. Martins, W.W. Bose Filho, and M. Strangwood, Influence of Niobium and Molybdenum on Mechanical Strength and Wear Resistance of Microalloyed Steels, Mater. Res., 2017, 20(4), p 1029-1034. https://doi.org/10.1590/1980-5373-mr-2016-1101 CrossRef

37.

R. Hou, G. Xu, H. Hu, and M. Zhou, Effects of Nb Addition on Transformation Kinetics and Microstructure Properties in Low-Carbon Bainitic Steels, Metallogr. Microstruct. Anal., 2017, 6(2), p 158-163. https://doi.org/10.1007/s13632-017-0345-x CrossRef

Titel: Effect of Low-Temperature Austempering and Quenching and Partitioning Treatments on Adhesive Wear Resistance of High-Silicon Multiphase Steels
verfasst von: Pedro Gabriel Bonella de Oliveira
Ricardo Tadeu Junior Aureliano
Luiz Carlos Casteletti
André Itman Filho
Amadeu Lombardi Neto
George Edward Totten
Publikationsdatum: 02.03.2020
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 6/2020
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-04699-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2020

Experimental Investigation and Optimization of Wire Electrical Discharge Machining for Surface Characteristics and Corrosion Rate of Biodegradable Mg Alloy

The Effects of Solutionizing Temperature on the Microstructure of Allvac 718Plus

On the Development of Parametrical Water Quenching Heat Transfer Model Using Cooling Curves by ASTM D6200 Quenchometer

Tailoring Tribological Performance of Pure Titanium by a Duplex Treatment of Laser Surface Texturing-Thermal Oxidation

Production and Characterization of Boride and Carbide Layers on AISI 15B30 Steel

Microstructure, Tensile Properties and Fracture Behavior of Squeeze-Cast Mg Alloy AZ91 with Thick Cross Section

Premium Partner

Marktübersichten