nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

10.11.2019 | ORIGINAL ARTICLE

The effect of wire feed geometry on electron beam freeform 3D printing of complex-shaped samples from Ti-6Al-4V alloy

verfasst von: K. N. Kalashnikov, V. E. Rubtsov, N. L. Savchenko, T. A. Kalashnikova, K. S. Osipovich, A. A. Eliseev, A. V. Chumaevskii

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 7-8/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper is devoted to studying two different ways of obtaining the complex-shaped bell-type samples from the titanium alloy Ti-6Al-4V. It is shown that the process of obtaining the samples on a three-axis table is sensitive to the wire feed geometry as depended on four such geometry zones. These zones are characterized by the angles between the wire feed direction and the tangent to the printing path. On the contrary, samples obtained on a rotary four-axis table are not sensitive to the wire feed geometry. Each of the two ways provides formation of its own specific types of the structure and different mechanical characteristics. In this paper, the structure of geometry affected zones is determined and the most optimal way for obtaining the samples is selected.

Vorheriger Artikel Study on manufacturing quality of micro-ultrasonic machining with force control

Nächster Artikel An assessment for a new approach to pulsating lubrication strategy (PLS) in end milling

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, Beese AM, Wilson-Heid A, De A, Zhang W (2018) Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci 92:112–224. https://doi.org/10.1016/j.pmatsci.2017.10.001 CrossRef

Bush RW, Brice CA (2012) Elevated temperature characterization of electron beam freeform fabricated Ti–6Al–4V and dispersion strengthened Ti–8Al–1Er. Mater Sci Eng A 554:12–21. https://doi.org/10.1016/j.msea.2012.05.083 CrossRef

Marshall G, Young Ii WJ, Shamsaei N, Craig J, Wakeman T, Thompson SM (2015) Dual thermographic monitoring of Ti-6Al-4V cylinders during direct laser deposition (2015) 26th International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference. 259. https://doi.org/10.13140/RG.2.1.3373.6401.

Åkerfeldt P, Antti M-L, Pederson R (2016) Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V. Mater Sci Eng A 674:428–437. https://doi.org/10.1016/j.msea.2016.07.038 CrossRef

Brandl E, Leyens C, Palm F (2011) Mechanical properties of additive manufactured Ti-6Al-4V using wire and powder based processes. IOP Conf Ser: Mater Sci Eng 26:012004. https://doi.org/10.1088/1757-899X/26/1/012004 CrossRef

Savchenko NL, Vorontsov AV, Utyaganova VR, Eliseev AA, Rubtsov VE, Kolubaev EA (2018) Features of the structural-phase state of the alloy Ti-6Al-4V in the formation of products using wire-feed electron beam additive manufacturing. Metal Work Mater Sci 20(4):60–71. https://doi.org/10.17212/1994-6309-2018-20.4-60-71 (In Russian)CrossRef

Fuchs J, Schneider C, Enzinger N (2018) Wire-based additive manufacturing using an electron beam as heat source. Weld World 62:267–275. https://doi.org/10.1007/s40194-017-0537-7 CrossRef

Wu Q, Lu J, Liu C, Shi X, Ma Q, Tang S, Fan H, Ma S (2017) Obtaining uniform deposition with variable wire feeding direction during wire-feed additive manufacturing. Mater Manuf Process 32:1881–1886. https://doi.org/10.1080/10426914.2017.1364860 CrossRef

Yilmaz O, Ugla AA (2016) Shaped metal deposition technique in additive manufacturing: a review. Proc Inst Mech Eng B J Eng Manuf 230(10):1781–1798. https://doi.org/10.1177/0954405416640181 CrossRef

10.

Lei J, Lu J, Tang S, Wu Q, Wang J, Ma S, Fan H, Liu C (2018) Research on mechanisms and controlling methods of macro defects in TC4 alloy fabricated by wire additive manufacturing. Materials 11(7):1104. https://doi.org/10.3390/ma11071104 CrossRef

11.

Abdollah S, Gallo D, Biamino S, Fino P (2017) An overview of additive manufacturing of titanium components by directed energy deposition: microstructure and mechanical properties. Appl Sci 7:883. https://doi.org/10.3390/app7090883 CrossRef

12.

Neikter M, Åkerfeldt P, Pederson R, Antti M-L, Sandell V (2018) Microstructural characterization and comparison of Ti-6Al-4V manufactured with different additive manufacturing processes. Mater Charact 143(SI):68–75. https://doi.org/10.1016/j.matchar.2018.02.003 CrossRef

13.

Lin JJ, Lv YH, Liu YX, Xu BS, Sun Z, Li ZG, Wu YX (2016) Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing. Mater Des 102:30–40. https://doi.org/10.1016/j.matdes.2016.04.018 CrossRef

14.

Lin J, Guo D, Lv Y, Liu Y, Wu X, Xu B, Xu G, Xu B (2018) Heterogeneous microstructure evolution in Ti-6Al-4V alloy thin-wall components deposited by plasma arc additive manufacturing. Mater Des 157:200–210. https://doi.org/10.1016/j.matdes.2018.07.040 CrossRef

15.

Brandl E, Schoberth A, Leyens C (2012) Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM). Mater Sci Eng A 532:295–307. https://doi.org/10.1016/j.msea.2011.10.095 CrossRef

16.

Wu B, Pan Z, Ding D, Cuiuri D, Li H, Fei Z (2018) The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy. J Mater Process Technol 258:97–105. https://doi.org/10.1016/j.jmatprotec.2018.03.024 CrossRef

17.

Wang X, Chou K (2018) Effect of support structures on Ti-6Al-4V overhang parts fabricated by powder bed fusion electron beam additive manufacturing. J Mater Process Technol 257:65–78. https://doi.org/10.1016/j.jmatprotec.2018.02.038 CrossRef

18.

Lia F, Park JZ, Keist JS, Joshi S, Martukanitz RP (2018) Thermal and microstructural analysis of laser-based directed energy deposition for Ti-6Al-4V and Inconel 625 deposits. Mater Sci Eng A 717:1–10. https://doi.org/10.1016/j.msea.2018.01.060 CrossRef

19.

Sames WJ, Unocic KA, Dehoff RR, Lolla T, Babu SS (2014) Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting. J Mater Res 29(17):1920–1930. https://doi.org/10.1557/jmr.2014.140 CrossRef

Titel: The effect of wire feed geometry on electron beam freeform 3D printing of complex-shaped samples from Ti-6Al-4V alloy
verfasst von: K. N. Kalashnikov
V. E. Rubtsov
N. L. Savchenko
T. A. Kalashnikova
K. S. Osipovich
A. A. Eliseev
A. V. Chumaevskii
Publikationsdatum: 10.11.2019
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 7-8/2019
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04589-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2019

Optimal design of cathode based on iterative solution of multi-physical model in pulse electrochemical machining (PECM)

Ductility-oriented high-speed grinding of silicon carbide and process design for quality and damage control with higher efficiency

Optimized hatch space selection in double-scanning track selective laser melting process

Investigation of the effect of speed ratio on workpiece surface topography and grinding power in cylindrical plunge grinding using grooved and non-grooved grinding wheels

Steel subsurface damage on plunge cylindrical grinding with sol-gel aluminum oxide grinding wheels

Improving surface integrity aspects of AISI 316L in the context of bioimplant applications

Premium Partner

Marktübersichten