nach oben

Cellulose

Erschienen in:

01.08.2014 | Original Paper

Carboxymethyl cellulose lithium (CMC-Li) as a novel binder and its electrochemical performance in lithium-ion batteries

verfasst von: Lei Qiu, Ziqiang Shao, Daxiong Wang, Feijun Wang, Wenjun Wang, Jianquan Wang

Erschienen in: Cellulose | Ausgabe 4/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The novel water-based binder CMC-Li is synthesized using cotton as a raw material. The mechanism of CMC-Li as a binder is reported. CMC-Li as a binder can increase the contents of Li⁺, improving the diffusion efficiency and specific capacity. The battery with CMC-Li as the binder retained 97.8 % of the initial reversible capacity after 200 cycles at 176 mAh g⁻¹, which is beyond the theoretical specific capacity of lithium iron phosphate (LiFePO₄, LFP). The cyclic voltammetry and electrochemical impedance spectroscopy curves are weaker. The batteries obtain good electrochemical properties, are pollution free and have excellent stability.

Graphical Abstract

Vorheriger Artikel Topochemical acetylation of cellulose nanopaper structures for biocomposites: mechanisms for reduced water vapour sorption

Nächster Artikel Removal of Pb(II) and malachite green from aqueous solution by modified cellulose

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Armand M, Grugeon S, Vezin H, Laruelle S, Ribiere P, Poizot P, Tarascon JM (2009) Conjugated dicarboxylate anodes for Li-ion batteries. Nat Mater 8(2):120–125. doi:10.1038/nmat2372 CrossRef

Armstrong AR, Lyness C, Panchmatia PM, Islam MS, Bruce PG (2011) The lithium intercalation process in the low-voltage lithium battery anode Li1 + xV1-xO2. Nat Mater 10(3):223–229. doi:10.1038/nmat2967 CrossRef

Augustyn V, Come J, Lowe MA, Kim JW, Taberna P-L, Tolbert SH, Abruna HD, Simon P, Dunn B (2013) High-rate electrochemical energy storage through Li + intercalation pseudocapacitance. Nat Mater 12(6):518–522. doi:10.1038/nmat3601 CrossRef

Chiappone A, Nair JR, Gerbaldi C, Bongiovanni R, Zeno E (2013) Nanoscale microfibrillated cellulose reinforced truly-solid polymer electrolytes for flexible, safe and sustainable lithium-based batteries. Cellulose 20(5):2439–2449. doi:10.1007/s10570-013-0002-8 CrossRef

Doerfler S, Hagen M, Althues H, Tuebke J, Kaskel S, Hoffmann MJ (2012) High capacity vertical aligned carbon nanotube/sulfur composite cathodes for lithium-sulfur batteries. Chem Commun 48(34):4097–4099. doi:10.1039/c2cc17925c CrossRef

Fei L, Xu Y, Wu X, Li Y, Xie P, Deng S, Smirnov S, Luo H (2013) SBA-15 confined synthesis of TiNb2O7 nanoparticles for lithium-ion batteries. Nanoscale 5(22):11102–11107. doi:10.1039/c3nr03594h CrossRef

Gibot P, Casas-Cabanas M, Laffont L, Levasseur S, Carlach P, Hamelet S, Tarascon J-M, Masquelier C (2008) Room-temperature single-phase Li insertion/extraction in nanoscale Li(x)FePO(4). Nat Mater 7(9):741–747. doi:10.1038/nmat2245 CrossRef

Gong L, Minh Hien Thi N, Oh ES (2013) High polar polyacrylonitrile as a potential binder for negative electrodes in lithium ion batteries. Electrochem Commun 29:45–47. doi:10.1016/j.elecom.2013.01.010 CrossRef

Han Z-J, Yabuuchi N, Shimomura K, Murase M, Yui H, Komaba S (2012) High-capacity Si-graphite composite electrodes with a self-formed porous structure by a partially neutralized polyacrylate for Li-ion batteries. Energy Environ Sci 5(10):9014–9020. doi:10.1039/c2ee22292b CrossRef

Jabbour L, Destro M, Chaussy D, Gerbaldi C, Penazzi N, Bodoardo S, Beneventi D (2013) Flexible cellulose/LiFePO4 paper-cathodes: toward eco-friendly all-paper Li-ion batteries. Cellulose 20(1):571–582. doi:10.1007/s10570-012-9834-x CrossRef

Lacey MJ, Jeschull F, Edstrom K, Brandell D (2013) Why PEO as a binder or polymer coating increases capacity in the Li-S system. Chem Commun 49(76):8531–8533. doi:10.1039/c3cc44772c CrossRef

Lestriez B, Bahri S, Sandu I, Roue L, Guyomard D (2007) On the binding mechanism of CMC in Si negative electrodes for Li-ion batteries. Electrochem Commun 9(12):2801–2806. doi:10.1016/j.elecom.2007.10.001 CrossRef

Li J, Le D-B, Ferguson PP, Dahn JR (2010) Lithium polyacrylate as a binder for tin-cobalt-carbon negative electrodes in lithium-ion batteries. Electrochim Acta 55(8):2991–2995. doi:10.1016/j.electacta.2010.01.011 CrossRef

Li F, Yager KG, Dawson NM, Yang J, Malloy KJ, Qin Y (2013) Complementary hydrogen bonding and block copolymer self-assembly in cooperation toward stable solar cells with tunable morphologies. Macromolecules 46(22):9021–9031. doi:10.1021/ma4016399 CrossRef

Li G, Qian S, Lee H, Hwang Y, Radermacher R (2014) Experimental investigation of energy and exergy performance of short term adsorption heat storage for residential application. Energy 65:675–691. doi:10.1016/j.energy.2013.12.017 CrossRef

Lu X, Yang W, Quan Z, Lin T, Bai L, Wang L, Huang F, Zhao Y (2014) Enhanced electron transport in Nb-doped TiO2 nanoparticles via pressure-induced phase transitions. J Am Chem Soc 136(1):419–426. doi:10.1021/ja410810w CrossRef

Mancini M, Nobili F, Tossici R, Marassi R (2012) Study of the electrochemical behavior at low temperatures of green anodes for Lithium ion batteries prepared with anatase TiO2 and water soluble sodium carboxymethyl cellulose binder. Electrochim Acta 85:566–571. doi:10.1016/j.electacta.2012.08.115 CrossRef

Moretti A, Kim G-T, Bresser D, Renger K, Paillard E, Marassi R, Winter M, Passerini S (2013) Investigation of different binding agents for nanocrystalline anatase TiO2 anodes and its application in a novel, green lithium-ion battery. J Power Sources 221:419–426. doi:10.1016/j.jpowsour.2012.07.142 CrossRef

Qiu L, Shao Z, Wang J, Zhang D, Cao J (2013) Study on synthesis, rheological and electrospinning functional materials of carboxymethyl cellulose lithium (CMC-Li). Acta Chim Sinica 71(11):1521–1526. doi:10.6023/a13060680 CrossRef

Qiu L, Shao Z, Liu M, Wang J, Li P, Zhao M (2014a) Synthesis and electrospinning carboxymethyl cellulose lithium (CMC-Li) modified 9, 10-anthraquinone (AQ) high-rate lithium-ion battery. Carbohydr Polym 102:986–992. doi:10.1016/j.carbpol.2013.09.105 CrossRef

Qiu L, Shao Z, Yang M, Wang W, Wang F, Wan J, Wang J, Bi Y, Duan H (2014b) Study on effects of carboxymethyl cellulose lithium (CMC-Li) synthesis and electrospinning on high-rate lithium ion batteries. Cellulose 21(0969–0239):615–626. doi:10.1007/s10570-013-0108-z CrossRef

Tollefson J (2010) Fuel of the future? Nature 464(7293):1262–1264. doi:10.1038/4641262a CrossRef

Xie L, Zhao L, Wan JL, Shao ZQ, Wang FJ, Lv SY (2012) The electrochemical performance of carboxymethyl cellulose lithium as a binding material for anthraquinone cathodes in lithium batteries. J Electrochem Soc 159(4):A499–A505. doi:10.1149/2.112204jes CrossRef

Yan X, Zhang Y, Zhu K, Gao Y, Zhang D, Chen G, Wang C, Wei Y (2014) Enhanced electrochemical properties of TiO2(B) nanoribbons using the styrene butadiene rubber and sodium carboxyl methyl cellulose water binder. J Power Sources 246:95–102. doi:10.1016/j.jpowsour.2013.07.072 CrossRef

Zhang Z, Zeng T, Qu C, Lu H, Jia M, Lai Y, Li J (2012) Cycle performance improvement of LiFePO4 cathode with polyacrylic acid as binder. Electrochim Acta 80:440–444. doi:10.1016/j.electacta.2012.07.054 CrossRef

Titel: Carboxymethyl cellulose lithium (CMC-Li) as a novel binder and its electrochemical performance in lithium-ion batteries
verfasst von: Lei Qiu
Ziqiang Shao
Daxiong Wang
Feijun Wang
Wenjun Wang
Jianquan Wang
Publikationsdatum: 01.08.2014
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 4/2014
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-014-0274-7

Springer Professional

Abstract

Graphical Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 4/2014

Poly(ε-caprolactone) (PCL)/cellulose nano-crystal (CNC) nanocomposites and foams

Proton mobility and copper coordination in polysaccharide- and gelatin-based bioblends and polyblends

Creating cellulose fibres with excellent UV protective properties using moist CF4 plasma and ZnO nanoparticles

A novel synergistic formulation between a cationic surfactant from lysine and hyaluronic acid as an antimicrobial coating for advanced cellulose materials

Chromophores in cellulosics, XI: isolation and identification of residual chromophores from bacterial cellulose

From paper to nanopaper: evolution of mechanical and physical properties