nach oben

Journal of Materials Engineering and Performance

Erschienen in:

17.01.2018

Experimental Investigation and Finite Element Analysis on Fatigue Behavior of Aluminum Alloy 7050 Single-Lap Joints

verfasst von: Bing Zhou, Hao Cui, Haibo Liu, Yang Li, Gaofeng Liu, Shujun Li, Shangzhou Zhang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The fatigue behavior of single-lap four-riveted aluminum alloy 7050 joints was investigated by using high-frequency fatigue test and scanning electron microscope (SEM). Stress distributions obtained by finite element (FE) analysis help explain the fatigue performance. The fatigue test results showed that the fatigue lives of the joints depend on cold expansion and applied cyclic loads. FE analysis and fractography indicated that the improved fatigue lives can be attributed to the reduction in maximum stress and evolution of fatigue damage at the critical location. The beneficial effects of strengthening techniques result in tearing ridges or lamellar structure on fracture surface, decrease in fatigue striations spacing, delay of fatigue crack initiation, crack deflection in fatigue crack propagation and plasticity-induced crack closure.

Nächster Artikel Evolution of Dynamic Recrystallization in 35CrMo Steel During Hot Deformation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M. Skorupa, T. Machniewicz, A. Skorupa, and A. Korbel, Fatigue Life Predictions for Riveted Lap Joints, Int. J. Fatigue, 2017, 94, p 41–57CrossRef

P.M.S.T. de Castro, P.F.P. de Matos, P.M.G.P. Moreira, and L.F.M. da Silva, An Overview on Fatigue Analysis of Aeronautical Structural Details: Open Hole, Single Rivet Lap-Joint, and Lap-Joint Panel, Mater. Sci. Eng. A, 2007, 468–470, p 144–157CrossRef

N. Aleksandrova, Analytical Modeling in Deformation Analysis of Interference-Fit Structures, Structures, 2016, 6, p 30–36CrossRef

J. Liu, H.G. Wu, J.J. Yang, and Z.F. Yue, Effect of Edge Distance Ratio on Residual Stresses Induced by Cold Expansion and Fatigue Life of TC4 Plates, Eng. Fract. Mech., 2013, 109, p 130–137CrossRef

X.M. Liu, H. Cui, S.Z. Zhang, H.P. Liu, G.F. Liu, and S.J. Li, Experimental and Numerical Investigations on Fatigue Behavior of Aluminum Alloy 7050-T7451 Single Lap Four-Bolted Joints, J. Mater. Sci. Technol., 2017, https://doi.org/10.1016/j.jmst.2017.09.020

R. Haque and Y. Durandet, Strength Prediction of Self-Pierce Riveted Joint in Cross-Tension and Lap-Shear, Mater. Des., 2016, 108, p 666–678CrossRef

X. Yuan, Z.F. Yue, W.Z. Yan, S.F. Wen, and L. Li, Experimental and Analytical Investigation of Fatigue and Fracture Behaviors for Scarfed Lap Riveted Joints with Different Lap Angle, Eng. Fail. Anal., 2013, 33, p 505–516CrossRef

C. Zeng, W. Tian, and W.H. Liao, The Effect of Residual Stress due to Interference Fit on the Fatigue Behavior of a Fastener Hole with Edge Cracks, Eng. Fail. Anal., 2016, 66, p 72–87CrossRef

M. Giglio and M. Lodi, Optimization of a Cold-Working Process for Increasing Fatigue Life, Int. J. Fatigue, 2009, 31, p 1978–1995CrossRef

10.

J. Liu, X.J. Shao, Y.S. Liu, and Z.F. Yue, Effect of Cold Expansion on Fatigue Performance of Open Holes, Mater. Sci. Eng. A, 2008, 477, p 271–276CrossRef

11.

S. Pasta, Fatigue Crack Propagation from a Cold-Worked Hole, Eng. Fract. Mech., 2007, 74, p 1525–1538CrossRef

12.

V. Lacarac, D.J. Smith, M.J. Pavier, and M. Priest, Fatigue Crack Growth from Plain and Cold Expanded Holes in Aluminium Alloys, Int. J. Fatigue, 2000, 22, p 189–203CrossRef

13.

Y. Sun, W.P. Hu, F. Shen, Q.C. Meng, and Y.M. Xu, Numerical Simulations of the Fatigue Damage Evolution at a Fastener Hole Treated by Cold Expansion or with Interference Fit Pin, Int. J. Mech. Sci., 2016, 107, p 188–200CrossRef

14.

P.M.G.P. Moreira, F.P. de Matos, and P.M. de Castro, Fatigue Striation Spacing and Equivalent Initial Flaw Size in Al 2024-T3 Riveted Specimens, Theor. Appl. Fract. Mech., 2005, 43, p 89–99CrossRef

15.

P.F.P. de Matos, P.M.G.P. Moreira, J.C.P. Pina, A.M. Dias, and P.M.S.T. de Castro, Residual Stress Effect on Fatigue Striation Spacing in a Cold-Worked Rivet Hole, Theor. Appl. Fract. Mech., 2004, 42, p 139–148CrossRef

16.

T.N. Chakherlou, M. Mirzajanzadeh, B. Abazadeh, and K. Saeedi, An Investigation About Interference Fit Effect on Improving Fatigue Life of a Holed Single Plate in Joints, Eur. J. Mech. A Solid, 2010, 29, p 675–682CrossRef

17.

Z.Q. Cao and M. Cardew-Hall, Interference-Fit Riveting Technique in Fiber Composite Laminates, Aerosp. Sci. Technol., 2006, 10, p 327–330CrossRef

18.

H. Hüyük, O. Music, A. Koç, C. Karadoğan, and Ç. Bayram, Analysis of Elastic-Plastic Interference-Fit Joints, Procedia Eng., 2014, 81, p 2030–2035CrossRef

19.

J. Liu, J.X. Kang, W.Z. Yan, F.S. Wang, and Z.F. Yue, Prediction of Fatigue Performance of Fastener Holes with Bolt Clamping Force Based on Critical Plane Approach, Mater. Sci. Eng. A, 2010, 527, p 3510–3514CrossRef

20.

E. Lepretre, S. Chataigner, L. Dieng, L. Gaillet, and H. Cannard, Numerical and Experimental Investigations of Hot Driven Riveting Process on Old Metal Structures, Eng. Struct., 2016, 127, p 583–593CrossRef

21.

A.M.P. de Jesus, A.L.L. da Silva, and J.A.F.O. Correia, Fatigue of Riveted and Bolted Joints made of Puddle Iron—An Numerical Approach, J. Constr. Steel Res., 2014, 102, p 164–177CrossRef

22.

N.J. Chen, H.Y. Luo, M. Wan, and J.L. Chenot, Experimental and Numerical Studies on Failure Modes of Riveted Joints Under Tensile Load, J. Mater. Process. Technol., 2014, 214, p 2049–2058CrossRef

23.

Z. Semari, A. Aid, A. Benhamena, A. Amrouche, M. Benguediab, A. Sadok, and N. Benseddiq, Effect of Residual Stresses Induced by Cold Expansion on the Crack Growth in 6082 Aluminum Alloy, Eng. Fract. Mech., 2013, 99, p 159–168CrossRef

24.

W.Z. Ya, X.S. Wang, H.S. Gao, and Z.F. Yue, Effect of Split Sleeve Cold Expansion on Cracking Behaviors of Titanium Alloy TC4 Holes, Eng. Fract. Mech., 2012, 88, p 79–89CrossRef

25.

T.N. Chakherlou, M. Shakouri, A. Akbari, and A.B. Aghdam, Effect of Cold Expansion and Bolt Clamping on Fretting Fatigue Behavior of Al 2024-T3 in Double Shear Lap Joints, Eng. Fail. Anal., 2012, 25, p 29–41CrossRef

26.

Y. Fu, E.D. Ge, H.H. Su, J.H. Xu, and R.Z. Li, Cold Expansion Technology of Connection Holes in Aircraft Structures: A Review and Prospect, Chin. J. Aeronaut., 2015, 28, p 961–973CrossRef

27.

T.N. Chakherlou and B. Abazadeh, Experimental and Numerical Investigations About the Combined Effect of Interference Fit and Bolt Clamping on the Fatigue Behavior of Al 2024-T3 Double Shear Lap Joints, Mater. Des., 2012, 33, p 425–435CrossRef

Titel: Experimental Investigation and Finite Element Analysis on Fatigue Behavior of Aluminum Alloy 7050 Single-Lap Joints
verfasst von: Bing Zhou
Hao Cui
Haibo Liu
Yang Li
Gaofeng Liu
Shujun Li
Shangzhou Zhang
Publikationsdatum: 17.01.2018
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 3/2018
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3137-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2018

Weldability and Impact Energy Properties of High-Hardness Armor Steel

Improving Corrosion Resistance of 316L Austenitic Stainless Steel Using ZrO2 Sol-Gel Coating in Nitric Acid Solution

Influence of High Pulsed Magnetic Field on the Dislocations and Mechanical Properties of Al2O3/Al Composites

Controlled High Filler Loading of Functionalized Al2O3-Filled Epoxy Composites for LED Thermal Management

Al2O3-TiC Composite Prepared by Spark Plasma Sintering Process: Evaluation of Mechanical and Tribological Properties

Analysis of the Enameled AISI 316LVM Stainless Steel

Premium Partner

Marktübersichten