Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Journal of Materials Engineering and Performance
Erschienen in: Journal of Materials Engineering and Performance 10/2019

11.10.2019

Comparative Corrosion Behavior of Five Different Microstructures of Rebar Steels in Simulated Concrete Pore Solution with and Without Chloride Addition

verfasst von: Prvan Kumar Katiyar, Prasanna Kumar Behera, S. Misra, K. Mondal

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The present work discusses the effect of five different microstructures, coarse, fine and very fine ferrite–pearlite, martensite and tempered martensite, made by furnace cooling, air cooling, forced air-cooling, water quenching and tempering, respectively, of a rebar steel on its corrosion performance in freely aerated with and without chloride-contaminated simulated concrete pore solution using the dynamic polarization and electrochemical impedance spectroscopy. The corrosion performance of the steels with five different microstructures relates to the polarization resistance, protective ability of rusts and the extent of the galvanic attack. The corrosion rate of the steels has been found to be comparable in the simulated concrete pore (SCP) solution. However, in chloride-containing SCP solution, corrosion rate has been found to increase in the following sequence: forced air-cooled–air-cooled–quenched–furnace-cooled–tempered steels.
Vorheriger Artikel Mechanical Behavior of Lead at High Strain Rates
Nächster Artikel Hot Deformation and Processing Maps of B4C/6061Al Nanocomposites Fabricated by Spark Plasma Sintering

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
F. Lollini, M. Carsana, M. Gastaldi, and E. Redaelli, Corrosion Behaviour of Stainless Steel Reinforcement in Concrete, Corros. Rev., 2018, 1, p 1–16
2.
O. Girčiene, M. Samulevičiene, V. Burokas, and R. Ramanauskas, Corrosion Behaviour of Phosphated Reinforcing Steel in Alkaline Media Contaminated with Chloride Ions, Chemija, 2008, 19, p 14–19
3.
R.R. Hussain, J.K. Singh, A. Alhozaimy, A. Al-Negheimish, C. Bhattacharya, R.S. Pathania, and D.D.N. Singh, Effect of Reinforcing Bar Microstructure on Passive Film Exposed to Simulated Concrete Pore Solution, ACI, Mater. J., 2018, 115, p 181–190
4.
S. Ahmad, Reinforcement Corrosion in Concrete Structures, Its Monitoring and Service Life Prediction—A Review, Cem. Concr. Compos., 2003, 25, p 459–471
5.
K. Asami and M. Kikuchi, In-Depth Distribution of Rusts on a Plain Carbon Steel and Weathering Steels Exposed to Coastal–Industrial Atmosphere for 17 Years, Corros. Sci., 2003, 45, p 2671–2688
6.
Q.C. Zhang, J.S. Wu, J.J. Wang, W.L. Zheng, J.G. Chen, and A.B. Li, Corrosion Behavior of Weathering Steel in Marine Atmosphere, Mater. Chem. Phys., 2002, 77, p 603–608
7.
J.H. Wang, F.I. Wei, Y.S. Chang, and H.C. Shih, The Corrosion Mechanisms of Carbon Steel and Weathering Steel in SO2 Polluted Atmospheres, Mater. Chem. Phys., 1997, 47, p 1–8
8.
S.K. Nandi, N.K. Tewary, J.K. Saha, and S.K. Ghosh, Microstructure, Mechanical Properties and Corrosion Performance of a Few TMT Rebars, Corros. Eng. Sci. Technol., 2016, 51, p 476–488
9.
Y.Y. Chen, H.J. Tzeng, L.I. Wei, L.H. Wang, J.C. Oung, and H.C. Shih, Corrosion Resistance and Mechanical Properties of Low-Alloy Steels Under Atmospheric Conditions, Corros. Sci., 2005, 47, p 1001–1021
10.
Q. Xu, K. Gao, W. Lv, and X. Pang, Effects of Alloyed Cr and Cu on the Corrosion Behavior of Low-Alloy Steel in a Simulated Groundwater Solution, Corros. Sci., 2016, 102, p 114–124
11.
J. Guo, C. Shang, S. Yang, H. Guo, X. Wang, and X. He, Weather Resistance of Low Carbon High Performance Bridge Steel, Mater. Des., 2009, 30, p 129–134
12.
J. Guo, S. Yang, C. Shang, Y. Wang, and X. He, Influence of Carbon Content and Microstructure on Corrosion Behaviour of Low Alloy Steels in a Cl-Containing Environment, Corros. Sci., 2008, 51, p 242–251
13.
D. Clover, B. Kinsella, B. Pejcic, and R. De Marco, The Influence of Microstructure on the Corrosion Rate of Various Carbon Steels, J. Appl. Electrochem., 2005, 35, p 139–149
14.
H.J. Cleary and N.D. Greene, Corrosion Properties of Iron and Steel, Corros. Sci., 1967, 7, p 821–831
15.
H.J. Cleary and N.D. Greene, Electrochemical Properties of Fe and Steel, Corros. Sci., 1969, 9, p 3–13
16.
M. Stern, The Effect of Alloying Elements in Iron on Hydrogen Over-Voltage and Corrosion Rate in Acid Environment, J. Electrochem. Soc., 1955, 102, p 663–668
17.
D.N. Staicopolous, The Role of Cementite in the Acidic Corrosion of Steel, J. Electroanal. Soc., 1963, 110, p 1121–1124
18.
X. Hao, J. Dong, I.I.N. Etim, J. Wei, and W. Ke, Sustained Effect of Remaining Cementite on the Corrosion Behavior of Ferrite-Pearlite Steel Under the Simulated Bottom Plate Environment of Cargo Oil Tank, Corros. Sci., 2016, 110, p 296–304
19.
J. Sánchez, J. Fullea, C. Andrade, J.J. Gaitero, and A. Porro, AFM Study of the Early Corrosion of a High Strength Steel in a Diluted Sodium Chloride Solution, Corros. Sci., 2008, 50, p 1820–1824
20.
W.J. Tomlinson and K. Giles, The Microstructures and Corrosion of a 0.79C Steel Tempered in the Range 100-700 °C, Corros. Sci., 1983, 23, p 1353–1359
21.
A.P. Moon, S. Sangal, S. Layek, S. Giribaskar, and K. Mondal, Corrosion Behavior of High-Strength Bainitic Rail Steels, Metall. Mater. Trans. A, 2015, 46, p 1500–1518
22.
S. Al-Hassan, B. Mishra, D.L. Olson, and M.M. Salama, Effect of Microstructure on Corrosion of Steels in Aqueous Solution Containing Carbon Dioxide, Corros. Eng. Sect., 1998, 54, p 480–491
23.
L.R. Bhagavathi, G.P. Chaudhari, and S.K. Nath, Mechanical and Corrosion Behavior of Plain Low Carbon Dual-Phase Steels, Mater. Des., 2011, 32, p 433–440
24.
O. Keleştemur and S. Yildiz, Effect of Various Dual-Phase Heat Treatments on the Corrosion Behavior of Reinforcing Steel Used in the Reinforced Concrete Structures, Constr. Build. Mater., 2009, 23, p 78–84
25.
O. Keleştemur, M. Aksoy, and S. Yildiz, Corrosion Behavior of Tempered Dual-Phase Steel Embedded in Concrete, Int. J. Miner. Metall. Mater., 2009, 16, p 43–50
26.
W.R. Osório, L.C. Peixoto, L.R. Garcia, and A. Garcia, Electrochemical Corrosion Response of a Low Carbon Heat Treated Steel in a NaCl Solution, Mater. Corros., 2009, 60, p 804–812
27.
V.C. Igwemezie and J.E.O. Ovri, Investigation into the Effects of Microstructure on the Corrosion Susceptibility of Medium Carbon Steel, Int. J. Eng. Sci., 2013, 2, p 11
28.
R.R. Hussain, A. Alhozaimy, A. Al-Negheimish, and D.D.N. Singh, Time-Dependent Variation of the Electrochemical Impedance for Thermo-Mechanically Treated Versus Plain Low Alloy Steel Rebars in Contact with Simulated Concrete Pore Solution, Constr. Build. Mater., 2014, 73, p 283–288
29.
B. Li, Y. Huan, and W. Zhang, Passivation and Corrosion Behavior of P355 Carbon Steel in Simulated Concrete Pore Solution at pH 12.5 to 14, Int. J. Electrochem. Sci., 2017, 12, p 10402–10420
30.
J.K. Singh and D.D.N. Singh, The Nature of Rusts and Corrosion Characteristics of Low Alloy and Plain Carbon Steels in Three Kinds of Concrete Pore Solution with Salinity and Different pH, Corros. Sci., 2012, 56, p 129–142
31.
Y. Zhang and A. Poursaee, Passivation and Corrosion Behavior of Carbon Steel in Simulated Concrete Pore Solution Under Tensile and Compressive Stresses, J. Mater. Civ. Eng., 2015, 27, p 1–9
32.
J. Shi, D. Ph, D. Wang, J. Ming, and W. Sun, Long-Term Electrochemical Behavior of Low-Alloy Steel in Simulated Concrete Pore Solution with Chlorides, J. Mater. Civ. Eng., 2018, 30, p 1–11
33.
E. Zitrou, J. Nikolaou, P.E. Tsakiridis, and G.D. Papadimitriou, Atmospheric Corrosion of Steel Reinforcing Bars Produced by Various Manufacturing Processes, Constr. Build. Mater., 2007, 21, p 1161–1169
34.
D. Trejo, P. Monteiro, G. Thomas, and X. Wang, Mechanical Properties and Corrosion Susceptibility of Dual-Phase Steel in Concrete, Cem. Concr. Res., 1994, 24, p 1245–1254
35.
36.
P. Ghods, O.B. Isgor, G. McRae, and T. Miller, The Effect of Concrete Pore Solution Composition on the Quality of Passive Oxide Films on Black Steel Reinforcement, Cem. Concr. Compos., 2009, 31, p 2–11
37.
B.B. Hope et al., ACI 222R-01 Protection of Metals in Concrete Against Corrosion Reported by ACI Committee 222, 2010.
38.
ASTM G102, Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, ASTM Int., 2008, G102-89, p 1–7
39.
A.F. Betancur, F.R. Pérez, M.M. Correa, and C.A. Barrero, Quantitative Approach in Iron Oxides and Oxihydroxides by Vibrational Analysis, Opt. Pura Apl., 2012, 45, p 269–275
40.
J. Aramendia, L. Gomez-Nubla, L. Bellot-Gurlet, K. Castro, C. Paris, P. Colomban, and J.M. Madariaga, Protective Ability Index Measurement Through Raman Quantification Imaging to Diagnose the Conservation State of Weathering Steel Structures, J. Raman Spectrosc., 2014, 45, p 1076–1084
41.
G.E. Totten, Steel Heat Treatment Handbook, Second Edi, CRC Press, Taylor & Francis Group, 2006
42.
ASTM C 876, Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete, (1999) pp. 1–6.
43.
C.Q. Ye, R.G. Hu, S.G. Dong, X.J. Zhang, R.Q. Hou, R.G. Du, C.J. Lin, and J.S. Pan, EIS Analysis on Chloride-Induced Corrosion Behavior of Reinforcement Steel in Simulated Carbonated Concrete Pore Solutions, J. Electroanal. Chem., 2013, 688, p 275–281
44.
J. Shi, W. Sun, J. Jiang, and Y. Zhang, Influence of Chloride Concentration and Pre-passivation on the Pitting Corrosion Resistance of Low-Alloy Reinforcing Steel in Simulated Concrete Pore Solution, Constr. Build. Mater., 2016, 111, p 805–813
45.
M. Liu, X. Cheng, X. Li, C. Zhou, and H. Tan, Effect of Carbonation on the Electrochemical Behavior of Corrosion Resistance Low Alloy Steel Rebars in Cement Extract Solution, Constr. Build. Mater., 2017, 130, p 193–201
46.
R. Balasubramaniam, A.V.R. Kumar, and P. Dillmann, Characterisation of Ancient Indian Iron, Curr. Sci., 2003, 85, p 1546–1555
47.
M. Morcillo, R. Wolthuis, J. Alcántara, B. Chico, I. Díaz, and D. De La Fuente, SEM/Micro Raman, a Very Useful Technique for Characterizing the Morphologies of Rust Phases Formed on Carbon Steel in Atmospheric Exposures, Corrosion., 2016, 72, p 1044–1054
48.
K.D. Ralston and N. Birbilis, Effect of Grain Size on Corrosion, Corrosion., 2010, 66, p 1–4
49.
X.Y. Wang and D.Y. Li, Mechanical and Electrochemical Behavior of Nanocrystalline Surface of 304 Stainless Steel, Electrochim. Acta, 2002, 47, p 3939–3947
50.
P.K. Katiyar, P.K. Behera, S. Misra, and K. Mondal, Effect of Microstructures on the Corrosion Behavior of Reinforcing Bars (Rebar) Embedded in Concrete, Metals Mater. Int, 2019, 25, p 1209–1226.
51.
P.K. Katiyar, S. Misra, and K. Mondal, Comparative Corrosion Behavior of Five Microstructures (Pearlite, Bainite, Spheroidized, Martensite, and Tempered Martensite) Made from a High Carbon Steel, Metall. Mater. Trans. A, 2019, 50A, p 1489–1501
52.
P.K. Katiyar, S. Misra, and K. Mondal, Effect of Different Cooling Rates on the Corrosion Behavior of High-Carbon Pearlitic Steel, J. Mater. Eng. Perform., 2018, 27, p 1753–1762
53.
P.K. Katiyar, S. Misra, and K. Mondal, Corrosion Behavior of Annealed Steels with Different Carbon Contents (0.002% C, 0.17% C, 0.43% C, and 0.7% C) in Freely Aerated 3.5% NaCl Solution. J. Mater. Eng. Perform., 2019, 28, p 4041–4052.
Metadaten
Titel
Comparative Corrosion Behavior of Five Different Microstructures of Rebar Steels in Simulated Concrete Pore Solution with and Without Chloride Addition
verfasst von
Prvan Kumar Katiyar
Prasanna Kumar Behera
S. Misra
K. Mondal
Publikationsdatum
11.10.2019
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 10/2019
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-019-04339-x

Weitere Artikel der Ausgabe 10/2019

Journal of Materials Engineering and Performance 10/2019 Zur Ausgabe

OriginalPaper

Microstructure and Mechanical Properties of B4C-Blended M3:2 High-Speed Steel Powders Consolidated by Sintering and Heat Treatment

OriginalPaper

Comparative Study of the Geometric Effects on Fracture Behaviors of Side-Grooved and Plain-Sided Compact Tension Specimens

OriginalPaper

The Effect of Annealing on the Properties of AW5754 Aluminum Alloy-AZ31B Magnesium Alloy Explosively Welded Bimetals

OriginalPaper

Effect of Boron Micro-alloying on Microstructure and Corrosion Behavior of Dual-Phase Steel

OriginalPaper

Ti Alloy Three-Way Pipe Fabricated by the Combination of 3D Printing and Cold Isostatic Pressing

OriginalPaper

Comparative Evaluation of Creep-Rupture Behavior of P9 Steel Plate and Thick Section Tubeplate Forging

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise