Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
MTZ-Fachkongress

Antriebe und Energiesysteme von morgen


Austausch von Automobil- und Energiewirtschaft

Am 14./15. Mai geht es in Chemnitz um die Mobilitätswende durch Elektro- und Wasserstofffahrzeuge.
Erweiterte Suche
Anmelden
nach oben
Metals and Materials International
Erschienen in: Metals and Materials International 5/2019

04.04.2019

A Particle Swarm Optimization-Based Multi-level Processing Parameters Optimization Method for Controlling Microstructures of an Aged Superalloy During Isothermal Forging

verfasst von: Dong-Dong Chen, Y. C. Lin

Erschienen in: Metals and Materials International | Ausgabe 5/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

To obtain the designed target microstructures of an aged superalloy during isothermal forging, a multi-level processing parameters optimization method is developed based on particle swarm optimization (PSO) algorithm. In the developed method, the accurate material models are used to characterize the microstructural evolution. Based on the designed target microstructures, the global and local optimality criterions are constructed to alternately optimize global and local multi-level processing parameters by the PSO algorithm with a linear decreasing inertia weight strategy. The optimized initial volume fraction of δ phase (δVF), deformation temperature and strain rate are 12.95%, 1000 °C and 0.001 s−1, respectively. According to these optimized parameters, the recrystallization volume fraction, average grain size and δVF are 100%, 11.2 µm and 2.1%, respectively, which well agree with the designed targets. Additionally, the processing parameters optimized by the developed method and traditional processing maps are compared. It is found that the developed method is more effective to control microstructures for the studied superalloy.
Vorheriger Artikel Correlation Between Primary Si and Silicide Refinement Induced by Ultrasonic Treatment of Multicomponent Al–Si Alloy Containing Ti, Zr, V, and P
Nächster Artikel Correlation Study Between Material Parameters and Mechanical Properties of Iron–Carbon Compacts Using Sensitivity Analysis and Regression Model

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Y.C. Lin, X.M. Chen, A critical review of experimental results and constitutive descriptions for metals and alloys in hot working. Mater. Des. 32, 1733–1759 (2011)CrossRef
2.
M.S. Chen, W.Q. Yuan, H.B. Li, Z.H. Zou, New insights on the relationship between flow stress softening and dynamic recrystallization behavior of magnesium alloy AZ31B. Mater. Charact. 147, 173–183 (2019)CrossRef
3.
H. Kim, D. Kim, K. Ahn, D. Yoo, H.S. Son, G.S. Kim, K. Chung, Inverse characterization method for mechanical properties of strain/strain-rate/temperature/temperature-history dependent steel sheets and its application for hot press forming. Met. Mater. Int. 21, 874–890 (2015)CrossRef
4.
Q.W. Wang, Y.C. Lin, X.G. Liu, Y.Q. Jiang, X.Y. Zhang, D.D. Chen, C. Chen, K.C. Zhou, Precipitation behavior of a β-quenched Ti–5Al–5Mo–5V–1Cr–1Fe alloy during high-temperature compression. Mater. Charact. 151, 358–367 (2019)CrossRef
5.
D. Samantaray, S. Mandal, A.K. Bhaduri, A critical comparison of various data processing methods in simple uni-axial compression testing. Mater. Des. 32, 2797–2802 (2011)CrossRef
6.
D. Samantaray, S. Mandal, M. Jayalakshmi, C.N. Athreya, A.K. Bhaduri, V.S. Sarma, New insights into the relationship between dynamic softening phenomena and efficiency of hot working domains of a nitrogen enhanced 316L(N) stainless steel. Mater. Sci. Eng. A 598, 368–375 (2014)CrossRef
7.
M.S. Ghazani, B. Eghbali, G. Ebrahimi, Kinetics and critical conditions for initiation of dynamic recrystallization during hot compression deformation of AISI 321 austenitic stainless steel. Met. Mater. Int. 23, 964–973 (2017)CrossRef
8.
L.X. Li, L.Y. Zheng, B. Ye, Z.Q. Tong, Metadynamic and static recrystallization softening behavior of a bainite steel. Met. Mater. Int. 24, 60–66 (2018)CrossRef
9.
M. Rezayat, M.H. Parsa, H. Mirzadeh, J.M. Cabrera, Dynamic deformation response of Al–Mg and Al–Mg/B4C composite at elevated temperatures. Mater. Sci. Eng. A 712, 645–654 (2018)CrossRef
10.
H. Mirzadeh, M. Roostaei, M.H. Parsa, R. Mahmudi, Rate controlling mechanisms during hot deformation of Mg–3Gd–1Zn magnesium alloy: dislocation glide and climb, dynamic recrystallization, and mechanical twinning. Mater. Des. 68, 228–231 (2015)CrossRef
11.
P. Zhou, Q.X. Ma, Dynamic recrystallization behavior and constitutive modeling of as-cast 30Cr2Ni4MoV steel based on flow curves. Met. Mater. Int. 23, 359–368 (2017)CrossRef
12.
Y.Q. Ning, B.C. Xie, C. Zhou, H.Q. Liang, M.W. Fu, Strain-rate sensitivity of powder metallurgy superalloys associated with steady-state drx during hot compression process. Met. Mater. Int. 23, 350–358 (2017)CrossRef
13.
M. Zhang, G.Q. Liu, H. Wang, B.F. Hu, Modeling of thermal deformation behavior near γ′ solvus in a Ni-based powder metallurgy superalloy. Comput. Mater. Sci. 156, 241–245 (2019)CrossRef
14.
A. He, G. Xie, X.Y. Yang, X.T. Wang, H.L. Zhang, A physically-based constitutive model for a nitrogen alloyed ultralow carbon stainless steel. Comput. Mater. Sci. 98, 64–69 (2015)CrossRef
15.
X.M. Chen, Y.C. Lin, D.X. Wen, J.L. Zhang, M. He, Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation. Mater. Des. 57, 568–577 (2014)CrossRef
16.
F. Chen, Z.S. Cui, H.G. Ou, H. Long, Mesoscale modeling and simulation of microstructure evolution during dynamic recrystallization of a Ni-based superalloy. Appl. Phys. A 122, 890 (2016)CrossRef
17.
F. Chen, H. Wang, H. Zhu, H. Zhu, F. Ren, Z.S. Cui, High-temperature deformation mechanisms and physical-based constitutive modeling of ultra-supercritical rotor steel. J. Manuf. Process. 38, 223–234 (2019)CrossRef
18.
G.Z. Quan, G.C. Luo, J.T. Liang, D.S. Wu, A. Mao, Q. Liu, Modelling for the dynamic recrystallization evolution of Ti–6Al–4V alloy in two-phase temperature range and a wide strain rate range. Comput. Mater. Sci. 97, 136–147 (2015)CrossRef
19.
Y.C. Lin, X.M. Chen, M.S. Chen, Y. Zhou, D.X. Wen, D.G. He, A new method to predict the metadynamic recrystallization behavior in a typical nickel-based superalloy. Appl. Phys. A 122, 1–14 (2016)
20.
Y.C. Lin, Y.X. Liu, M.S. Chen, M.H. Huang, X. Ma, Z.L. Long, Study of static recrystallization behavior in hot deformed Ni-based superalloy using cellular automaton model. Mater. Des. 99, 107–114 (2016)CrossRef
21.
Y.V. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, D.R. Barker, Modeling of dynamic material behavior in hot deformation: forging of Ti-6242. Metall. Mater. Trans. A 15, 1883–1892 (1984)CrossRef
22.
B.J. Jang, H.S. Park, M.S. Kim, High temperature deformation behavior of Al–Zn–Mg-based new alloy using a dynamic material model. Met. Mater. Int. 24, 1249–1255 (2018)CrossRef
23.
Y.C. Lin, G. Liu, Effects of strain on the workability of a high strength low alloy steel in hot compression. Mater. Sci. Eng. A 523, 139–144 (2009)CrossRef
24.
A. Jenab, A.K. Taheri, Experimental investigation of the hot deformation behavior of AA7075: development and comparison of flow localization parameter and dynamic material model processing maps. Int. J. Mech. Sci. 78, 97–105 (2014)CrossRef
25.
D.X. Wen, Y.C. Lin, H.B. Li, X.M. Chen, J. Deng, L.T. Li, Hot deformation behavior and processing map of a typical Ni-based superalloy. Mater. Sci. Eng. A 591, 183–192 (2014)CrossRef
26.
D.X. Wen, Y.C. Lin, J. Chen, J. Deng, X.M. Chen, J.L. Zhang, M. He, Effects of initial aging time on processing map and microstructures of a nickel-based superalloy. Mater. Sci. Eng. A 620, 319–332 (2015)CrossRef
27.
A. Momeni, K. Dehghani, G.R. Ebrahimi, S. Kazemi, Developing the processing maps using the hyperbolic sine constitutive equation. Metall. Mater. Trans. A 44, 5567–5576 (2013)CrossRef
28.
S.M. Abbasi, A. Momeni, Hot working behavior of Fe–29Ni–17Co analyzed by mechanical testing and processing map. Mater. Sci. Eng. A 552, 330–335 (2012)CrossRef
29.
X.Y. Shu, S.Q. Lu, K.L. Wang, G.F. Li, Optimization of hot working parameters of as-forged Nitinol 60 shape memory alloy using processing maps. Met. Mater. Int. 21, 726–733 (2015)CrossRef
30.
C.R. Anoop, A. Prakash, S.K. Giri, S.V.S. Narayana Murty, I. Samajdar, Optimization of hot workability and microstructure control in a 12Cr–10Ni precipitation hardenable stainless steel: an approach using processing maps. Mater. Charact. 141, 97–107 (2018)CrossRef
31.
F.C. Ren, F. Chen, J. Chen, X.Y. Tang, Hot deformation behavior and processing maps of AISI 420 martensitic stainless steel. J. Manuf. Process. 31, 640–649 (2018)CrossRef
32.
A. Rudra, S. Das, R. Dasgupta, Constitutive modeling for hot deformation behavior of Al-5083 + SiC composite. J. Mater. Eng. Perform. 28, 87–99 (2019)CrossRef
33.
M. Hu, L.M. Dong, Z.Q. Zhang, X.F. Lei, R. Yang, Y.H. Sha, A novel computational method of processing map for Ti–6Al–4V alloy and corresponding microstructure study. Materials 11, 1599 (2018)CrossRef
34.
W.G. Frazier, J.C. Malas, E.A. Medina, S. Medeiros, S. Venugopal, W.M. Mullins, A. Chaudhary, R.D. Irwin, Application of control theory principles to optimization of grain size during hot extrusion. Mater. Sci. Techol. Lond. 14, 25–31 (1998)CrossRef
35.
J.C. Malas, W.G. Frazier, S. Venugopal, E.A. Medina, S. Medeiros, R. Srinivasan, R.D. Irwin, W.M. Mullins, A. Chaudhary, Optimization of microstructure development during hot working using control theory. Metall. Mater. Trans. A 28, 1921–1930 (1997)CrossRef
36.
S. Venugopal, E.A. Medina, J.C. Malas, S. Medeiros, W.G. Frazier, W.M. Mullins, R. Srinivasan, Optimization of microstructure during deformation processing using control theory principles. Scr. Mater. 36, 347–353 (1997)CrossRef
37.
D. Recker, M. Franzke, G. Hirt, Fast models for online-optimization during open die forging. CIRP Ann. Manuf. Technol. 60, 295–298 (2011)CrossRef
38.
Y.C. Lin, D.D. Chen, M.S. Chen, X.M. Chen, J. Li, A precise BP neural network-based online model predictive control strategy for die forging hydraulic press machine. Neural Comput. Appl. 29, 585–596 (2018)CrossRef
39.
D.G. He, Y.C. Lin, J. Chen, D.D. Chen, J. Huang, Y. Tang, M.S. Chen, Microstructural evolution and support vector regression model for an aged Ni-based superalloy during two-stage hot forming with stepped strain rates. Mater. Des. 154, 51–62 (2018)CrossRef
40.
Y.C. Lin, F.Q. Nong, X.M. Chen, D.D. Chen, M.S. Chen, Microstructural evolution and constitutive models to predict hot deformation behaviors of a nickel-based superalloy. Vacuum 137, 104–114 (2017)CrossRef
41.
N. DuyTrinh, Y. Shaohui, N.N. Tan, P.X. Son, L.A. Duc, A new method for online monitoring when grinding Ti–6Al–4V alloy. Mater. Manufact. Process. 34, 39–53 (2019)CrossRef
42.
G.Z. Quan, Z. Zou, H. Wen, S. Pu, W. Lv, A characterization of hot flow behaviors involving different softening mechanisms by ANN for as-forged Ti–10V–2Fe–3Al alloy. High Temp. Mater. Proc. 34, 651–665 (2015)
43.
A. Forcellese, F. Gabrielli, M. Simoncini, Prediction of flow curves and forming limit curves of Mg alloy thin sheets using ANN-based models. Comput. Mater. Sci. 50, 3184–3197 (2011)CrossRef
44.
A. Jenab, I.S. Sarraf, D.E. Green, T. Rahmaan, M.J. Worswick, The use of genetic algorithm and neural network to predict rate-dependent tensile flow behaviour of AA5182-O sheets. Mater. Des. 94, 262–273 (2016)CrossRef
45.
D.D. Chen, Y.C. Lin, Y. Zhou, M.S. Chen, D.X. Wen, Dislocation substructures evolution and an adaptive-network-based fuzzy inference system model for constitutive behavior of a Ni-based superalloy during hot deformation. J. Alloys Compd. 708, 938–946 (2017)CrossRef
46.
L.Y. Wang, L. Li, Z.H. Zhang, Accurate descriptions of hot flow behaviors across β transus of Ti–6Al–4V alloy by intelligence algorithm GA-SVR. J. Mater. Eng. Perform. 25, 3912–3923 (2016)CrossRef
47.
Y.C. Lin, F. Wu, Q.W. Wang, D.D. Chen, S.K. Singh, Microstructural evolution of a Ni–Fe–Cr-base superalloy during non-isothermal two-stage hot deformation. Vacuum 151, 283–293 (2018)CrossRef
48.
A. Seret, C. Moussa, M. Bernacki, N. Bozzolo, On the coupling between recrystallization and precipitation following hot deformation in a γ-γ′ nickel-based superalloy. Metall. Mater. Trans. A 49, 4199–4213 (2018)CrossRef
49.
S.P. Zhu, Q. Liu, J. Zhou, Z.Y. Yu, Fatigue reliability assessment of turbine discs under multi-source uncertainties. Fatigue Fract. Eng. M 41, 1291–1305 (2018)CrossRef
50.
S.P. Zhu, Y. Liu, Q. Liu, Z.Y. Yu, Strain energy gradient-based LCF life prediction of turbine discs using critical distance concept. Int. J. Fatigue 113, 33–42 (2018)CrossRef
51.
M.S. Chen, K.K. Li, Y.C. Lin, W.Q. Yuan, An improved kinetics model to describe dynamic recrystallization behavior under inconstant deformation conditions. J. Mater. Res. 31, 2994–3003 (2016)CrossRef
52.
Y.C. Lin, X.Y. Wu, X.M. Chen, J. Chen, D.X. Wen, J.L. Zhang, L.T. Li, EBSD study of a hot deformed nickel-based superalloy. J. Alloys Compd. 640, 101–113 (2015)CrossRef
53.
M. Zhang, G.Q. Liu, B.F. Hu, Effect of microstructure instability on hot plasticity during thermomechanical processing in PM Nickel-based superalloy. Acta Metall. Sin. 53, 1469–1477 (2017)
54.
A. Loyda, L.A. Reyes, G.M. Hernández-Muñoz, F.A. García-Castillo, P. Zambrano-Robledo, Influence of the incremental deformation during rotary forging on the microstructure behaviour of a nickel-based superalloy. Int. J. Adv. Manuf. Technol. 97, 2383–2396 (2018)CrossRef
55.
D.X. Wen, Y.C. Lin, J. Chen, X.M. Chen, J.L. Zhang, Y.J. Liang, L.T. Li, Work-hardening behaviors of typical solution-treated and aged Ni-based superalloys during hot deformation. J. Alloys Compd. 618, 372–379 (2015)CrossRef
56.
D.G. He, Y.C. Lin, M.S. Chen, J. Chen, D.X. Wen, X.M. Chen, Effect of pre-treatment on hot deformation behavior and processing map of an aged nickel-based superalloy. J. Alloys Compd. 649, 1075–1084 (2015)CrossRef
57.
Y.C. Lin, D.G. He, M.S. Chen, X.M. Chen, C.Y. Zhao, X. Ma, Z.L. Long, EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation. Mater. Des. 97, 13–24 (2016)CrossRef
58.
M. Irani, M. Joun, Determination of JMAK dynamic recrystallization parameters through FEM optimization techniques. Comput. Mater. Sci. 2018(142), 178–184 (2018)CrossRef
59.
M.S. Chen, W.Q. Yuan, H.B. Li, Z.H. Zou, Modeling and simulation of dynamic recrystallization behaviors of magnesium alloy AZ31B using cellular automaton method. Comput. Mater. Sci. 136, 163–172 (2017)CrossRef
60.
D.X. Wen, Y.C. Lin, Y. Zhou, A new dynamic recrystallization kinetics model for a Nb containing Ni–Fe–Cr-base superalloy considering influences of initial δ phase. Vacuum 141, 316–327 (2017)CrossRef
61.
D.X. Wen, Microstructural formation mechanism and processing planning method of GH4169 superalloy during die forging, Ph.D. dissertation Central South University 2017
62.
D.X. Wen, Y.C. Lin, X.H. Li, S.K. Singh, Hot deformation characteristics and dislocation substructure evolution of a nickel-base alloy considering effects of δ phase. J. Alloys Compd. 764, 1008–1020 (2018)CrossRef
63.
A. Nickabadi, M.M. Ebadzadeh, R. Safabakhsh, A novel particle swarm optimization algorithm with adaptive inertia weight. Appl. Soft Comput. 11, 3658–3670 (2011)CrossRef
Metadaten
Titel
A Particle Swarm Optimization-Based Multi-level Processing Parameters Optimization Method for Controlling Microstructures of an Aged Superalloy During Isothermal Forging
verfasst von
Dong-Dong Chen
Y. C. Lin
Publikationsdatum
04.04.2019
Verlag
The Korean Institute of Metals and Materials
Erschienen in
Metals and Materials International / Ausgabe 5/2019
Print ISSN: 1598-9623
Elektronische ISSN: 2005-4149
DOI
https://doi.org/10.1007/s12540-019-00265-8

Weitere Artikel der Ausgabe 5/2019

Metals and Materials International 5/2019 Zur Ausgabe

OriginalPaper

Fully Recrystallized Al0.5CoCrFeNi High-Entropy Alloy Strengthened by Nanoscale Precipitates

OriginalPaper

Correlation Study Between Material Parameters and Mechanical Properties of Iron–Carbon Compacts Using Sensitivity Analysis and Regression Model

OriginalPaper

In SR-GIXRD Study of Oxide Film Evaluation on AISI 304 Stainless Steel in High Temperature Water

OriginalPaper

Microstructure and Mechanical Properties of Welded Additively Manufactured Stainless Steels SS316L

OriginalPaper

Failure Analysis of a Water Wall Boiler Tube for Power Generation in a District Heating System

ReviewPaper

Important Factors on the Failure of Pipeline Steels with Focus on Hydrogen Induced Cracks and Improvement of Their Resistance: Review Paper

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise