nach oben

Journal of Materials Engineering and Performance

Erschienen in:

22.07.2022 | Technical Article

Mechanical Responses and Dynamic Recrystallization Mechanism of A356 Alloy during Single and Double Isothermal Compression Processes

verfasst von: Zhenglong Liang, Liqun Niu, Hao Li, Qi Zhang, Ke Huang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The impacts of loading conditions on the mechanical response and DRX of A356 during single and double thermal compression were investigated. The results indicate that the strain hardening rate obtained during the second isothermal compression is far larger than that obtained during the initial isothermal compression. The microstructure after both single and double compression is dominated by deformed columnar grains and equiaxed recrystallized grains. The recrystallization fraction of the samples after double compression is greatly affected by its initial dislocation density and microstructure state. The microstructure examination shows that the evolution of the subgrain boundaries around the original grain boundaries and within the deformed columnar grains is the main mechanism for recrystallized grain formation in the A356 alloy.

Vorheriger Artikel Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose

Nächster Artikel As-Cast High Entropy Shape Memory Alloys of (TiHfX)50(NiCu)50 with Large Recoverable Strain and Good Mechanical Properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M. Raugei, D. Morrey, A. Hutchinson and P. Winfield, A Coherent Life Cycle Assessment of a Range of Lightweighting Strategies for Compact Vehicles, J. Clean. Prod., 2015, 108, p 1168–1176. https://doi.org/10.1016/j.jclepro.2015.05.100CrossRef

Z.L. Liang, Q. Zhang, L.Q. Niu et al., Hot Deformation Behavior and Processing Maps of as-Cast Hypoeutectic Al-Si-Mg Alloy[J], J. Mater. Eng. Perform, 2019, 28(8), p 4871–4881. https://doi.org/10.1007/s11665-019-04229-2CrossRef

M. Tisza and I. Czinege, Comparative Study of the Application of Steels and Aluminum in Lightweight Production of Automotive Parts, Int. J. Lightweight. Mater. Manu., 2018 https://doi.org/10.1016/j.ijlmm.2018.09.001CrossRef

Q. Zhang, M. Cao, D. Zhang, S. Zhang and J. Sun, Research on Integrated Casting and Forging Process of Aluminum Automobile Wheel, Adv. Mech. Eng., 2014, 6, p 870182. https://doi.org/10.1155/2014/870182CrossRef

M.J. Roy, D.M. Maijer and L. Dancoine, Constitutive Behavior of as-Cast A356, Mater. Sci. Eng. A., 2012, 548, p 195–205. CrossRef

N. Haghdadi, A. Zarei-Hanzaki and H.R. Abedi, The Flow Behavior Modeling of Cast A356 Aluminum Alloy at Elevated Temperatures Considering the Effect of Strain, Mater. Sci. Eng. A., 2012, 535, p 252–257. https://doi.org/10.1016/j.msea.2011.12.076CrossRef

Y. Lin, S.-C. Luo, L.-X. Yin and J. Huang, Microstructural Evolution and High Temperature Flow Behaviors of a Homogenized Sr-Modified Al-Si-Mg Alloy, J. Alloys Compd., 2018, 739, p 590–599. https://doi.org/10.1016/j.jallcom.2017.12.278CrossRef

L.I. Dong-feng, Z. Duan-zheng, L. Sheng-dan, S. Zhao-jun, Z. Xin-ming, W. Qin and H. Su-qi, Dynamic Recrystallization Behavior of 7085 Aluminum Alloy During Hot Deformation, Trans. Nonferrous Metals Soc. China, 2016, 26(6), p 1491–1497. https://doi.org/10.1016/S1003-6326(16)64254-1CrossRef

N. Haghdadi, A. Zarei-Hanzaki, H.R. Abedi, D. Abou-Ras, M. Kawasaki and A.P. Zhiyaev, Evolution of Microstructure and Mechanical Properties in a Hypoeutectic Al-Si-Mg Alloy Processed by Accumulative Back Extrusion, Mater. Sci. Eng. A., 2016, 651, p 269–279. https://doi.org/10.1016/j.msea.2015.10.066CrossRef

10.

Q.Y. Yang, Z.H. Deng, Z.Q. Zhang, Q. Liu, Z.H. Jia and G.J. Huang, Effects of Strain Rate on Flow Stress Behavior and Dynamic Recrystallization Mechanism of Al-Zn-Mg-Cu Aluminum Alloy During Hot Deformation, Mater. Sci, Eng, A, 2016, 662, p 204–213. https://doi.org/10.1016/j.msea.2016.03.027CrossRef

11.

Y. Wu, H.C. Liao, J. Yang and K.X. Zhou, Effect of Si Content on Dynamic Recrystallization of Al-Si-Mg Alloys During Hot Extrusion, J. Mater. Sci. Techno., 2014, 30, p 1271–1277. https://doi.org/10.1016/j.jmst.2014.07.011CrossRef

12.

J.M. García-Infanta, A.P. Zhilyaev, F. Carreño, O.A. Ruano, J.Q. Su, S.K. Menon and T.R. McNelley, Strain Path and Microstructure Evolution during Severe Deformation Processing of an as-Cast Hypoeutectic Al–Si Alloy, J. Mater. Sci., 2010, 45, p 4613–4620. https://doi.org/10.1007/s10853-010-4530-4CrossRef

13.

S.K. Chaudhury, V. Warke, S. Shankar and D. Apelian, Localized Recrystallization in Cast Al–Si–Mg Alloy during Solution Heat Treatment: Dilatometric and Calorimetric Studies, Metall. Mater. Trans. A., 2011, 42A, p 3160–3169. https://doi.org/10.1007/s11661-011-0716-xCrossRef

14.

H.K. Zhang, H. Xiao, X.W. Fang, Q. Zhang, R.E. Logé and K. Huang, A Critical Assessment of Experimental Investigation of Dynamic Recrystallization of Metallic Materials, Mater. Design., 2020, 193, p 108873. https://doi.org/10.1016/j.matdes.2020.108873CrossRef

15.

Z.L. Liang and Q. Zhang, Quasi-Static Loading Responses and Constitutive Modeling of Al-Si-Mg, Metals, 2018, 8(10), p 1–11. CrossRef

16.

H. Wu, S.P. Wen, H. Huang, B.L. Li, X.L. Wu, K.Y. Gao, W. Wang and Z.R. Nie, Effects of Homogenization on Precipitation of Al3(Er, Zr) Particles and Recrystallization Behavior in a New Type Al-Zn-Mg-Er-Zr Alloy, Mater. Sci. Eng. A., 2017, 689, p 313–322. https://doi.org/10.1016/j.msea.2017.02.071CrossRef

17.

K. Huang and R.E. Logé, Microstructure and Flow Stress Evolution during Hot Deformation of 304L Austenitic Stainless Steel in Variable Thermomechanical Conditions, Mater. Sci. Eng. A, 2018, 711, p 600–610. https://doi.org/10.1016/j.msea.2017.11.042CrossRef

18.

B. Devincre, T. Hoc and L. Kubin, Dislocation Mean Free Paths and Strain Hardening of Crystals, Science, 2008, 320(5884), p 1745–1748. https://doi.org/10.1126/science.1156101CrossRef

19.

F. Barlat, M.V. Glazov, J.C. Brem and D.J. Lege, A Simple Model for Dislocation Behavior, Strain and Strain Rate Hardening Evolution in Deformation Aluminum Alloys, Int. J. Plasticity., 2002, 18, p 919–939. https://doi.org/10.1016/S0749-6419(01)00015-8CrossRef

20.

V.V. Bulatov, L.L. Hsiung, M. Tang, A. Arsenlis, M.C. Bartelt, W. Cai, J.N. Florando, M. Hiratani, M. Rhee, G. Hommes, T.G. Pierce and T.D. Rubia, Dislocations Multi-Junctions and Strain Hardening, Nature, 2006, 440, p 1174–1178. https://doi.org/10.1038/nature04658CrossRef

21.

K.K. Li, M.S. Chen, Y.C. Lin and W.Q. Yuan, Microstructure Evolution of an Aged Ni-Based Superalloy under Two-Stage Hot Compression with Different Strain Rates, Mater. Design., 2016, 111, p 344–352. https://doi.org/10.1016/j.matdes.2016.09.007CrossRef

22.

K. Huang and R.E. Logé, A Review of Dynamic Recrystallization Phenomena in Metallic Materials, Mater. Design., 2016, 111, p 548–574. CrossRef

23.

M.S. Chen, Z.H. Zou, Y.C. Lin and K.K. Li, Hot Deformation Behaviors of a Solution-Treated Ni-Based Superalloy under Constant and Changed Strain Rates, Vacuum, 2018, 155, p 531–538. https://doi.org/10.1016/j.vacuum.2018.06.059CrossRef

24.

K. Huang, K. Marthinsen, Q.L. Zhao and R.E. Logé, The Double-Edge Effect of Second-Phase Particles on the Recrystallization Behavior and Associated Mechanical Properties of Metallic Materials, Prog. Mater. Sci., 2018, 92, p 284–359. https://doi.org/10.1016/j.pmatsci.2017.10.004CrossRef

Titel: Mechanical Responses and Dynamic Recrystallization Mechanism of A356 Alloy during Single and Double Isothermal Compression Processes
verfasst von: Zhenglong Liang
Liqun Niu
Hao Li
Qi Zhang
Ke Huang
Publikationsdatum: 22.07.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07053-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2022

A New Dominance Distribution Method to Select Materials with Higher Fatigue Resistance under Property Scatter and Load Uncertainty

Corrosion Behavior of Embedded Perforated Biodegradable Mg/Fe Composite Plate

Effect of Aging on Transformation Behavior of Reverted Austenite and Toughness in Co-Free Maraging Stainless Steel

Influence of Dynamic Strain Aging on Ratcheting Deformation Behavior of SA333 Gr-6 Steel

Analyzing the Influence of Simultaneously Austenitization and Multi-Directional Boriding on the Surface and Subsurface of H13 Tool Steel

Analytical and Numerical Research on the Effect of Head Shape of Peening Medium on the Dimple Size, Plastic Region Depth and Residual Stress

Premium Partner

Marktübersichten