nach oben

Journal of Materials Engineering and Performance

Erschienen in:

20.05.2022 | Technical Article

Corrosion Behavior of Embedded Perforated Biodegradable Mg/Fe Composite Plate

verfasst von: Lu Chen, Honggang Xia, Peng Chen, Chunyong Liang, Hongshui Wang, Ning Liu

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Magnesium is one of promising biodegradable metals for medical application. But the high degradation rate limits its further applications. Combining Mg with other biodegradable materials to form composite is an efficient approach. Herein, Mg/Fe laminated composites were prepared by laser drilling followed by hot rolling. The micro-hole array was fabricated in pure iron using femtosecond laser firstly, and then the Mg plates and Fe foil were alternately stacked and rolled. Magnesium passed through the micro-holes and interconnected each other to form a metallurgical bonding during rolling process. As a result, the Mg/Fe composites exhibited a tensile strength of 178.94 ± 3.03 MPa. Immersion tests show that localized corrosion occurred in the Mg layer firstly. With the increase of immersion time, the corrosion products increased and gradually covered the composite surface. After immersion for 8 h, the Mg layer surface was completely corroded, while the Fe layer surface still retained smooth and no obvious defect was observed. However, the corrosion microcracks were also formed along the Mg/Fe interface.

Vorheriger Artikel The Effects of Heat Treatment on Tensile and Thermal Expansion Behavior of Laser Powder-Bed Fusion Invar36

Nächster Artikel A Cost Effective Approach to Explore the Electrical Discharge Machined Surface Characteristics of Nimonic C263 Superalloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. Zaffora, F. Di Franco, D. Virtù, F. Carfì Pavia, G. Ghersi, S. Virtanen, and M. Santamaria, Tuning of the Mg Alloy AZ31 Anodizing Process for Biodegradable Implants, ACS Appl. Mater. Interfaces., 2021, 13(11), p 12866–12876. https://doi.org/10.1021/acsami.0c22933CrossRef

J. Li, P. Zhou, L. Wang, Y. Hou, X. Zhang, S. Zhu, and S. Guan, Investigation of Mg–xLi–Zn Alloys for Potential Application of Biodegradable Bone Implant Materials, J. Mater. Sci. Mater. Med., 2021, 32(4), p 43–55. https://doi.org/10.1007/s10856-021-06516-8CrossRef

H. Sampatirao, S. Radhakrishnapillai, S. Dondapati, E. Parfenov, and R. Nagumothu, Developments in Plasma Electrolytic Oxidation (PEO) Coatings for Biodegradable Magnesium Alloys, Mater. Today Proc., 2021, 46, p 1407–1415. https://doi.org/10.1016/j.matpr.2021.02.650CrossRef

J. Xu, P. Hu, X. Zhang, J. Chen, J. Wang, J. Zhang, Z. Chen, M.K. Yu, Y.W. Chung, Y. Wang, X. Zhang, Y. Zhang, N. Zheng, H. Yao, J. Yue, H.C. Chan, L. Qin, and Y.C. Ruan, Magnesium Implantation or Supplementation Ameliorates Bone Disorder in CFTR-Mutant Mice through an ATF4-Dependent Wnt/β-Catenin Signaling, Bioact. Mater., 2022, 8, p 95–108. https://doi.org/10.1016/j.bioactmat.2021.06.034CrossRef

N. Li and Y. Zheng, Novel Magnesium Alloys Developed for Biomedical Application: A Review, J. Mater. Sci. Technol., 2013, 29(6), p 489–502. https://doi.org/10.1016/j.jmst.2013.02.005CrossRef

Z. Cui, W. Li, L. Cheng, D. Gong, W. Cheng, and W. Wang, Effect of Nano-HA Content on the Mechanical Properties, Degradation and Biocompatible Behavior of Mg-Zn/HA Composite Prepared by Spark Plasma Sintering, Mater. Charact., 2019, 151, p 620–631. https://doi.org/10.1016/j.matchar.2019.03.048CrossRef

S.M. Baek, I.Y. Choi, J.H. Moon, U. Rakhmatjon, J.H. Kim, N.J. Kim, J.K. Kim, A. Amanov, and H.S. Kim, Control of Magnesium In vitro Degradation Based on Ultrafine-Grained Surface Gradient Structure Using Ultrasonic Nanocrystalline Surface Modification, Materialia, 2020, 12, 100821. https://doi.org/10.1016/j.mtla.2020.100821CrossRef

W. Weng, A. Biesiekierski, Y. Li, M. Dargusch, and C. Wen, A Review of the Physiological Impact of Rare Earth Elements and their Uses in Biomedical Mg Alloys, Acta Biomater., 2021, 130, p 80–97. https://doi.org/10.1016/j.actbio.2021.06.004CrossRef

S.C. Bondy, The Neurotoxicity of Environmental Aluminum is Still an Issue, Neurotoxicology, 2010, 31(5), p 575–581. https://doi.org/10.1016/j.neuro.2010.05.009CrossRef

10.

M. Toorani, M. Aliofkhazraei, M. Golabadi, and A.S. Rouhaghdam, Effect of Lanthanum Nitrate on the Microstructure and Electrochemical Behavior of PEO Coatings on AZ31 Mg Alloy, J. Alloys Compd., 2017, 719, p 242–255. https://doi.org/10.1016/j.jallcom.2017.05.169CrossRef

11.

N. Zhang, W. Wang, X. Zhang, K.C. Nune, Y. Zhao, N. Liu, R.D.K. Misra, K. Yang, L. Tan, and J. Yan, The Effect of Different Coatings on Bone Response and Degradation Behavior of Porous Magnesium-Strontium Devices in Segmental Defect Regeneration, Bioact. Mater., 2021, 6(6), p 1765–1776. https://doi.org/10.1016/j.bioactmat.2020.11.026CrossRef

12.

P. Mohan Sathyaraj, K. Ravichandran, and T.S. Sankara Narayanan, Controlling the Rate of Degradation of Mg Using Magnesium Fluoride and Magnesium Fluoride-Magnesium Phosphate Duplex Coatings, J. Magnes. Alloys, 2021 https://doi.org/10.1016/j.jma.2021.06.005CrossRef

13.

N.T. Kirkland, Magnesium Biomaterials: Past, Present and Future, Corros. Eng. Sci. Technol., 2012, 47(5), p 322–328. https://doi.org/10.1179/1743278212Y.0000000034CrossRef

14.

N. Babacan, F. Kochta, V. Hoffmann, T. Gemming, U. Kühn, L. Giebeler, A. Gebert, and J. Hufenbach, Effect of Silver Additions on the Microstructure, Mechanical Properties and Corrosion Behavior of Biodegradable Fe-30Mn-6Si, Mater. Today Commun., 2021, 28, 102689. https://doi.org/10.1016/j.mtcomm.2021.102689CrossRef

15.

P. Liu, D. Zhang, Y. Dai, J. Lin, Y. Li, and C. Wen, Microstructure, Mechanical Properties, Degradation Behavior, and Biocompatibility of Porous Fe-Mn Alloys Fabricated by Sponge Impregnation and Sintering Techniques, Acta Biomater., 2020, 114, p 485–496. https://doi.org/10.1016/j.actbio.2020.07.048CrossRef

16.

H. Hermawan, A. Purnama, D. Dube, J. Couet, and D. Mantovani, Fe–Mn Alloys for Metallic Biodegradable Stents: Degradation and Cell Viability Studies, Acta Biomater., 2010, 6(5), p 1852–1860. https://doi.org/10.1016/j.actbio.2009.11.025CrossRef

17.

S. Wang, Y. Xu, J. Zhou, H. Li, J. Chang, and Z. Huan, In vitro Degradation and Surface Bioactivity of Iron-Matrix Composites Containing Silicate-Based Bioceramic, Bioact. Mater., 2017, 2(1), p 10–18. https://doi.org/10.1016/j.bioactmat.2016.12.001CrossRef

18.

R. Gorejová, L. Haverová, R. Oriňaková, A. Oriňak, and M. Oriňak, Recent Advancements in Fe-Based Biodegradable Materials for Bone Repair, J. Mater. Sci., 2019, 54(3), p 1913–1947. https://doi.org/10.1007/s10853-018-3011-zCrossRef

19.

T. Wang, P. Upadhyay, and S. Whalen, A Review of Technologies for Welding Magnesium Alloys to Steels, Int. J. Precis. Eng Manuf. Green Technol, 2021, 8(3), p 1027–1042. https://doi.org/10.1007/s40684-020-00247-xCrossRef

20.

W. Jiang, H. Jiang, G. Li, F. Guan, J. Zhu, and Z. Fan, Microstructure, Mechanical Properties and Fracture Behavior of Magnesium/Steel Bimetal Using Compound Casting Assisted with Hot-Dip Aluminizing, Met. Mater. Int., 2021, 27(8), p 2977–2988. https://doi.org/10.1007/s12540-019-00606-7CrossRef

21.

S. Jana, Y. Hovanski, and G.J. Grant, Friction Stir Lap Welding of Magnesium Alloy to Steel: A Preliminary Investigation, Metall. Mater. Trans. A., 2010, 41(12), p 3173–3182. https://doi.org/10.1007/s11661-010-0399-8CrossRef

22.

Y. Rong, H. Li, D. Cheng, Z. Xiong, Y. Chen, Z. Liu, and W. Li, Study on Microstructure and Properties of Mg/Steel Laser Welding-Brazing Joint Assisted by Alternating Magnetic Field with Ni Interlayer, Int. J. Lightweight Mater.Manuf., 2021, 4(4), p 416–422. https://doi.org/10.1016/j.ijlmm.2021.06.002CrossRef

23.

M. Mehrzad, A. Sadeghi, and M. Farahani, Microstructure and Properties of Transient Liquid Phase Bonding of AM60 Mg Alloy to 304 Stainless Steel with Zn Interlayer, J. Mater. Process. Technol., 2019, 266, p 558–568. https://doi.org/10.1016/j.jmatprotec.2018.11.031CrossRef

24.

Y. Li, C. Yang, Z. Peng, Z. Wu, and Z. Cui, Microstructure and Formation Mechanism of Ultrasound-Assisted Transient Liquid Phase Bonded Magnesium Alloys with Ni Interlayer, Materials (Basel, Switzerland), 2019, 12(22), p 3732. https://doi.org/10.3390/ma12223732CrossRef

25.

A. Çetin, J. Krebs, A. Durussel, A. Rossoll, J. Inoue, T. Koseki, S. Nambu, and A. Mortensen, Laminated Metal Composites by Infiltration, Metall. Mater. Trans. A., 2011, 42(11), p 3509–3520. https://doi.org/10.1007/s11661-011-0756-2CrossRef

26.

L. Liu, L. Xiao, J.C. Feng, Y.H. Tian, S.Q. Zhou, and Y. Zhou, Resistance Spot Welded AZ31 Magnesium Alloys, Part II: Effects of Welding Current on Microstructure and Mechanical Properties, Metall. Mater. Trans. A., 2010, 41(10), p 2642–2650. https://doi.org/10.1007/s11661-010-0339-7CrossRef

27.

D. Ren and L. Liu, Interface Microstructure and Mechanical Properties of arc Spot Welding Mg–Steel Dissimilar Joint with Cu Interlayer, Mater. Des., 2014, 59, p 369–376. https://doi.org/10.1016/j.matdes.2014.03.006CrossRef

28.

M. Koba, T. Araki, S. Nambu, J. Inoue, and T. Koseki, Bonding Interface Formation between Mg Alloy and Steel by Liquid-phase Bonding using the Ag Interlayer, Metall. Mater. Trans. A., 2012, 43(2), p 592–597. https://doi.org/10.1007/s11661-011-0878-6CrossRef

29.

G. Song, T. Li, Z. Zhang, and L. Liu, Investigation of Unequal Thickness Mg/Steel Butt-Welded Plate by Hybrid Laser-Tungsten Inert Gas Welding with a Ni Interlayer, J. Manuf. Process., 2017, 30, p 299–302. https://doi.org/10.1016/j.jmapro.2017.09.019CrossRef

30.

M. Windmann, A. Röttger, H. Kügler, and W. Theisen, Laser Beam Welding of Magnesium to Coated High-Strength Steel 22MnB5, Int. J. Adv. Manuf. Technol., 2016, 87(9), p 3149–3156. https://doi.org/10.1007/s00170-016-8682-5CrossRef

31.

O. Bouaziz, X. Sauvage, and D. Barcelo, Steel-Magnesium Composite Wire Obtained by Repeated Co-Extrusion, Mater. Sci. Forum, 2010, 654–656, p 1263–1266. https://doi.org/10.4028/www.scientific.net/MSF.654-656.1263CrossRef

32.

J.E. Schaffer, E.A. Nauman, and L.A. Stanciu, Cold-Drawn Bioabsorbable Ferrous and Ferrous Composite Wires: An Evaluation of Mechanical Strength and Fatigue Durability, Metall. Mater. Trans. B., 2012, 43(4), p 984–994. https://doi.org/10.1007/s11663-012-9661-3CrossRef

33.

L. Pan, B. Zhang, and F. Dai, Multi-objective Optimization of Co-cured Composite Laminates with Embedded Viscoelastic Damping Layer, J. Mater. Sci. Technol., 2009, 25(5), p 708–712. https://doi.org/10.3321/j.issn:1005-0302.2009.05.027CrossRef

34.

Y. Song, D. Shan, R. Chen, F. Zhang, and E.-H. Han, Biodegradable Behaviors of AZ31 Magnesium Alloy in Simulated Body Fluid, Mater. Sci. Eng. C, 2009, 29(3), p 1039–1045. https://doi.org/10.1016/j.msec.2008.08.026CrossRef

35.

Z. Esen, E.B. Öcal, A. Akkaya, B. Gürçay, C. Özcan, B.A. Özgümüş, Ö. Duygulu, and A.F. Dericioğlu, Corrosion Behaviours of Ti6Al4V-Mg/Mg-Alloy Composites, Corros. Sci., 2020, 166, 108470. https://doi.org/10.1016/j.corsci.2020.108470CrossRef

36.

C. Gao, M. Yao, S. Li, P. Feng, S. Peng, and C. Shuai, Highly Biodegradable and Bioactive Fe-Pd-Bredigite Biocomposites Prepared by Selective Laser Melting, J Adv Res, 2019, 20, p 91–104. https://doi.org/10.1016/j.jare.2019.06.001CrossRef

37.

Y. Wang, B. Liu, Z. Xa, X. Zhang, Y. Miao, N. Yang, B. Yang, L. Zhang, W. Kuang, J. Li, E. Ma, and Z. Shan, Turning a Native or Corroded Mg Alloy Surface into an Anti-Corrosion Coating in Excited CO₂, Nat. Commun., 2018, 9(1), p 4058. https://doi.org/10.1038/s41467-018-06433-5CrossRef

38.

S.-J. Sun, S.-P. Ju, C.-C. Yang, K.-C. Chang, and I.J. Lee, Effects of Strontium Incorporation to Mg-Zn-Ca Biodegradable Bulk Metallic Glass Investigated by Molecular Dynamics Simulation and Density Functional Theory Calculation, Sci. Rep., 2020, 10(1), p 2515. https://doi.org/10.1038/s41598-020-58789-8CrossRef

39.

S. Hiromoto, M. Inoue, T. Taguchi, M. Yamane, and N. Ohtsu, In vitro and In vivo Biocompatibility and Corrosion Behaviour of a Bioabsorbable Magnesium Alloy Coated with Octacalcium Phosphate and Hydroxyapatite, Acta Biomater., 2015, 11, p 520–530. https://doi.org/10.1016/j.actbio.2014.09.026CrossRef

40.

O.B. Istanbullu and G. Akdogan, A Simulation Study of Galvanic Corrosion Potential on the Surface of Implantable Biometallic Couples, J. Bio- Tribo-Corros., 2021, 7(1), p 25. https://doi.org/10.1007/s40735-020-00462-8CrossRef

41.

D. Höche, C. Blawert, S.V. Lamaka, N. Scharnagl, C. Mendis, and M.L. Zheludkevich, The Effect of Iron Re-Deposition on the Corrosion of Impurity-Containing Magnesium, Phys. Chem. Chem. Phys., 2016, 18(2), p 1279–1291. https://doi.org/10.1039/C5CP05577FCrossRef

42.

S.V. Lamaka, D. Höche, R.P. Petrauskas, C. Blawert, and M.L. Zheludkevich, A New Concept for Corrosion Inhibition of Magnesium: Suppression of Iron Re-Deposition, Electrochem. Commun., 2016, 62, p 5–8. https://doi.org/10.1016/j.elecom.2015.10.023CrossRef

Titel: Corrosion Behavior of Embedded Perforated Biodegradable Mg/Fe Composite Plate
verfasst von: Lu Chen
Honggang Xia
Peng Chen
Chunyong Liang
Hongshui Wang
Ning Liu
Publikationsdatum: 20.05.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07015-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2022

Reciprocating Wear of Ti-TiB In Situ Composites Synthesized via Vacuum Arc Melting

Heat Treatment Behaviour of SLM-Built Titanium Matrix Composite: Microstructure and Tribological Performance

Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer

Fracture Behavior of GTD-111 Superalloy during In Situ Tensile Scanning Electron Microscopy

Corrosion and Metal Release Investigation of a Porous Biomedical Vitallium Alloy Coated with 58S Sol-Gel Bioactive Glass

Effect of Grain Size on the Mechanical Properties and Formability of AA8021 Aluminum Foil

Premium Partner

Marktübersichten