Skip to main content
main-content

Zeitschrift

Metallurgical and Materials Transactions A

Metallurgical and Materials Transactions A 5/2016

Ausgabe 5/2016

Inhaltsverzeichnis ( 59 Artikel )

11.02.2016 | Communication | Ausgabe 5/2016

Surface Relief and Internal Structure in Fatigued Stainless Sanicro 25 Steel

Jaroslav Polák, Veronika Mazánová, Ivo Kuběna, Milan Heczko, Jiří Man

25.02.2016 | Communication | Ausgabe 5/2016

Nanocrystalline Advanced High Strength Steel Produced by Cold Rolling and Annealing

Daniel M. Field, David C. Van Aken

29.02.2016 | Communication | Ausgabe 5/2016

Grain Boundary Strengthening in High Mn Austenitic Steels

Jee-Hyun Kang, Shanghong Duan, Sung-Joon Kim, Wolfgang Bleck

22.02.2016 | Communication | Ausgabe 5/2016

Quantitatively Analyzing Strength Contribution vs Grain Boundary Scale Relation in Pure Titanium Subjected to Severe Plastic Deformation

Peng Luo, Qiaodan Hu, Xiaolin Wu

14.03.2016 | Communication | Ausgabe 5/2016

The Determining Role of Finish Cooling Temperature on the Microstructural Evolution and Precipitation Behavior in an Nb-V-Ti Microalloyed Steel in the Context of Newly Developed Ultrafast Cooling

Xiaolin Li, Zhaodong Wang, Xiangtao Deng, Guodong Wang, R. D. K. Misra

16.03.2016 | Communication | Ausgabe 5/2016 Open Access

The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting

Samuel Tammas-Williams, Philip J. Withers, Iain Todd, Philip B. Prangnell

22.02.2016 | Ausgabe 5/2016

Influence of Martensite Fraction on the Stabilization of Austenite in Austenitic–Martensitic Stainless Steels

Qiuliang Huang, Bruno C. De Cooman, Horst Biermann, Javad Mola

22.02.2016 | Ausgabe 5/2016

Effect of Multistage Heat Treatment on Microstructure and Mechanical Properties of High-Strength Low-Alloy Steel

Qingdong Liu, Haiming Wen, Han Zhang, Jianfeng Gu, Chuanwei Li, Enrique J. Lavernia

23.02.2016 | Ausgabe 5/2016

Intergranular Cracking Susceptibility of 2.25Cr Heat-Resistant Steels Depending on Alloying Elements and Impurities

Hyun Je Sung, Nam Hoe Heo, Sung-Joon Kim

02.03.2016 | Ausgabe 5/2016

Atom Probe Tomography Study of Multi-microalloyed Carbide and Carbo-Nitride Precipitates and the Precipitation Sequence in Nb-Ti HSLA Steels

Monica Kapoor, Ronald O’Malley, Gregory B. Thompson

26.02.2016 | Ausgabe 5/2016 Open Access

Austenite Formation from Martensite in a 13Cr6Ni2Mo Supermartensitic Stainless Steel

A. Bojack, L. Zhao, P. F. Morris, J. Sietsma

18.02.2016 | Ausgabe 5/2016

Effect of Gas Tungsten Arc Welding Parameters on Hydrogen-Assisted Cracking of Type 321 Stainless Steel

Paul Rozenak, Yaakov Unigovski, Roni Shneck

22.02.2016 | Ausgabe 5/2016

Bauschinger Effect in an Austenitic Steel: Neutron Diffraction and a Multiscale Approach

Jamal Fajoui, David Gloaguen, Vincent Legrand, Guy Oum, Joe Kelleher, Winfried Kockelmann

04.02.2016 | Ausgabe 5/2016

Hot Ductility Characterization of Sanicro-28 Super-Austenitic Stainless Steel

A. Mirzaei, A. Zarei-Hanzaki, H. R. Abedi

01.05.2016 | Ausgabe 5/2016

The Influence of Ni and V Trace Elements on High-Temperature Tensile Properties and Aging of A356 Aluminum Foundry Alloy

Maria Teresa Di Giovanni, Emanuela Cerri, Daniele Casari, MATTIA Merlin, LARS Arnberg, Gian Luca Garagnani

01.05.2016 | Ausgabe 5/2016

A Hydrogen-Induced Decohesion Model for Treating Cold Dwell Fatigue in Titanium-Based Alloys

Kwai S. Chan, Jonathan Moody

01.05.2016 | Ausgabe 5/2016

Impact Toughness of 0.2 Pct C-1.5 Pct Si-(1.5 to 5) Pct Mn Transformation-Induced Plasticity-Aided Steels with an Annealed Martensite Matrix

Hikaru Tanino, Masaomi Horita, Koh-Ichi Sugimoto

01.05.2016 | Ausgabe 5/2016

Investigation on Deformation Behavior of Nickel Aluminum Bronze by Neutron Diffraction and Transmission Electron Microscopy

Xiaoyan Xu, Hong Wang, Yuting Lv, Weijie Lu, Guangai Sun

24.02.2016 | Ausgabe 5/2016

Effect of Grain Refinement on Jerky Flow in an Al-Mg-Sc Alloy

Anna Mogucheva, Diana Yuzbekova, Rustam Kaibyshev, Tatiana Lebedkina, Mikhail Lebyodkin

18.02.2016 | Ausgabe 5/2016

Enhancement of the Thermal Stability and Mechanical Hardness of Zr-Al-Co Amorphous Alloys by Ag Addition

Yongyong Wang, Xiao Dong, Xiaohui Song, Jinfeng Wang, Gong Li, Riping Liu

22.02.2016 | Ausgabe 5/2016

Decomposition and Precipitation Process During Thermo-mechanical Fatigue of Duplex Stainless Steel

Anja Weidner, Roman Kolmorgen, Ivo Kubena, Dirk Kulawinski, Tomas Kruml, Horst Biermann

29.02.2016 | Ausgabe 5/2016

Analysis of the Tensile Behavior of 12 pct Mn Multi-phase (α + γ) TWIP + TRIP Steel by Neutron Diffraction

Sangwon Lee, Wanchuck Woo, Bruno C. de Cooman

29.02.2016 | Ausgabe 5/2016

Microstructure, Lattice Misfit, and High-Temperature Strength of γ′-Strengthened Co-Al-W-Ge Model Superalloys

Christopher H. Zenk, Alexander Bauer, Philip Goik, Steffen Neumeier, Howard J. Stone, Mathias Göken

04.03.2016 | Ausgabe 5/2016

The Nature of Tensile Ductility as Controlled by Extreme-Sized Pores in Powder Metallurgy Ti-6Al-4V Alloy

P. Kumar, K. S. Ravi Chandran, F. Cao, M. Koopman, Z. Zak Fang

01.03.2016 | Ausgabe 5/2016

Active Brazing of C/C Composite to Copper by AgCuTi Filler Metal

Kexiang Zhang, Lihong Xia, Fuqin Zhang, Lianlong He

01.05.2016 | Ausgabe 5/2016

Formability of Friction Stir-Welded Blanks with Different Thickness Ratios

Sina Kolahgar, Morteza Ghaffarpour, Niloufar Habibi, Amir Hossein Kokabi, Abbas Akbarzadeh

23.02.2016 | Ausgabe 5/2016

Toward Improving the Type IV Cracking Resistance in Cr-Mo Steel Weld Through Thermo-Mechanical Processing

Benjamin A. Shassere, Yukinori Yamamoto, Sudarsanam Suresh Babu

01.03.2016 | Ausgabe 5/2016

Microstructural Evolution During Multi-Pass Friction Stir Processing of a Magnesium Alloy

A. Tripathi, A. Tewari, A. K. Kanjarla, N. Srinivasan, G. M. Reddy, S. M. Zhu, J. F. Nie, R. D. Doherty, I. Samajdar

18.02.2016 | Ausgabe 5/2016

Development and Kinetics of TiB2 Layers on the Surface of Titanium Alloy by Superplastic Boronizing

Nor Taibah Taazim, Iswadi Jauhari, Yukio Miyashita, Mohd Faizul Mohd Sabri

03.03.2016 | Ausgabe 5/2016

Study on the Mechanical Properties of Heat-Treated Electroless NiP Coatings Reinforced with Al2O3 Nano Particles

S. Karthikeyan, L. Vijayaraghavan, S. Madhavan, A. Almeida

03.03.2016 | Ausgabe 5/2016

Wear Behavior and Mechanism of Fe-Al Intermetallic Coating Prepared by Hot-Dip Aluminizing and Diffusion

Q. Y. Zhang, Y. Zhou, J. Q. Liu, K. M. Chen, J. G. Mo, X. H. Cui, S. Q. Wang

18.02.2016 | Ausgabe 5/2016

Microstructure Evolution and Rheological Behavior of Cooling Slope Processed Al-Si-Cu-Fe Alloy Slurry

Prosenjit Das, Sudip K. Samanta, Supriya Bera, Pradip Dutta

08.02.2016 | Ausgabe 5/2016

Effect of Heating Rate on the Pressureless Sintering Densification of a Nickel-Based Superalloy

David Levasseur, Mathieu Brochu

08.02.2016 | Ausgabe 5/2016

Thermomechanical Processing and Roll Bonding of Tri-Layered Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Composite

Hobyung Kim, Gyeong Tae Kang, Sun Ig Hong

01.05.2016 | Ausgabe 5/2016

Preparation of High Silicon Electrical Steel Sheets with Strong {100} Recrystallization Texture by the Texture Inheritance of Initial Columnar Grains

Hongjiang Pan, Zhihao Zhang, Jianxin Xie

10.02.2016 | Ausgabe 5/2016

Replication Experiments in Microgravity Liquid Phase Sintering

Randall M. German, John L. Johnson

18.02.2016 | Ausgabe 5/2016

Influence of Heat Treatments on the Microstructural Evolution and Resultant Mechanical Properties in a Low Carbon Medium Mn Heavy Steel Plate

Jun Chen, Meng-yang Lv, Zhen-yu Liu, Guo-dong Wang

09.03.2016 | Ausgabe 5/2016

Evaluation of Interfacial Interactions Between Ti-6Al-4V and Mold Use Ti-Added Backup Coat in Investment Casting

Xu Cheng, Lianjing Chai, Guoqing Wu, Hong Wang, Hai Nan

29.02.2016 | Ausgabe 5/2016

Annealing Characteristics of Ultrafine Grained Low-Carbon Steel Processed by Differential Speed Rolling Method

Kotiba Hamad, Young Gun Ko

29.02.2016 | Ausgabe 5/2016

New Powder Metallurgical Approach to Achieve High Fatigue Strength in Ti-6Al-4V Alloy

Fei Cao, K. S. Ravi Chandran, Pankaj Kumar, Pei Sun, Z. Zak Fang, Mark Koopman

09.03.2016 | Ausgabe 5/2016

Investigation of Oxide Bifilms in Investment Cast Superalloy IN100: Part I. Mechanical Properties

Gerhard E. Fuchs, Max A. Kaplan

09.03.2016 | Ausgabe 5/2016

Investigation of Oxide Bifilms in Investment Cast Superalloy IN100: Part II. Characterization

Max A. Kaplan, Gerhard E. Fuchs

08.03.2016 | Ausgabe 5/2016

Comparative Investigation of the Downward and Upward Directionally Solidified Single-Crystal Blades of Superalloy CMSX-4

Fu Wang, Dexin Ma, Samuel Bogner, Andreas Bührig-Polaczek

08.02.2016 | Ausgabe 5/2016

Enhancement of Physical and Mechanical Properties of Oxide Dispersion-Strengthened Tungsten Heavy Alloys

Walid Mohamed Rashad Daoush, Ayman Hamada Abdelhady Elsayed, Omayma Abdel Gawad El Kady, Mohamed Abdallah Sayed, Osama Monier Dawood

22.02.2016 | Ausgabe 5/2016

Effect of Cr, Ti, V, and Zr Micro-additions on Microstructure and Mechanical Properties of the Al-Si-Cu-Mg Cast Alloy

S. K. Shaha, F. Czerwinski, W. Kasprzak, J. Friedman, D. L. Chen

18.02.2016 | Ausgabe 5/2016

Geometric and Chemical Composition Effects on Healing Kinetics of Voids in Mg-bearing Al Alloys

Miao Song, Kui Du, Chunyang Wang, Shengping Wen, Hui Huang, Zuoren Nie, Hengqiang Ye

08.03.2016 | Ausgabe 5/2016

Analysis of Slip Activity and Deformation Modes in Tension and Tension-Creep Tests of Cast Mg-10Gd-3Y-0.5Zr (Wt Pct) at Elevated Temperatures Using In Situ SEM Experiments

Huan Wang, Carl J. Boehlert, Qudong Wang, Dongdi Yin, Wenjiang Ding

22.02.2016 | Ausgabe 5/2016

Fabrication of Spherical AlSi10Mg Powders by Radio Frequency Plasma Spheroidization

Linzhi Wang, Ying Liu, Sen Chang

26.02.2016 | Ausgabe 5/2016

Effect of Al Addition on ω Precipitation and Age Hardening of Ti-Al-Mo-Fe Alloys

Chenglin Li, Dong-Geun Lee, Xujun Mi, Wenjun Ye, Songxiao Hui, Yongtai Lee

24.02.2016 | Ausgabe 5/2016

Investigation on the Interface Characteristics of Al/Mg Bimetallic Castings Processed by Lost Foam Casting

Wenming Jiang, Guangyu Li, Zitian Fan, Long Wang, Fuchu Liu

01.05.2016 | Ausgabe 5/2016

Role of the Surface in Solid–Solid Phase Transitions: Molecular Dynamics Study of the α-γ Transition in Fe

Binjun Wang, Herbert M. Urbassek

24.02.2016 | Ausgabe 5/2016

Numerical Study of the Effect of the Sample Aspect Ratio on the Ductility of Bulk Metallic Glasses (BMGs) Under Compression

Yunpeng Jiang

26.02.2016 | Ausgabe 5/2016

Theoretical Investigation of Stabilizing Mechanism by Boron in Body-Centered Cubic Iron Through (Fe,Cr)23(C,B)6 Precipitates

Ryoji Sahara, Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi

08.02.2016 | Ausgabe 5/2016

Comparison of Performance and Oxidation of Nitronic-50 and Stainless Steel 316 in Subcritical and Supercritical Water Environments

Zachary Karmiol, Dev Chidambaram

02.03.2016 | Ausgabe 5/2016

Verification of the Mechanism of Grain Refinement by Ultrasonic Treatment of Aluminum-4 Wt Pct Silicon Molten Alloy

Kazuki Matsuda, Tsuyoshi Takehara, Minghan Yang, Hikaru Uno, Takashi Kubo, Gaku Miyano, Makoto Yoshida

24.02.2016 | Ausgabe 5/2016

Characterization of Steel-Ta Dissimilar Metal Builds Made Using Very High Power Ultrasonic Additive Manufacturing (VHP-UAM)

Niyanth Sridharan, Mark Norfolk, Sudarsanam Suresh Babu

08.03.2016 | Ausgabe 5/2016

Effect of Energy Input on the Characteristic of AISI H13 and D2 Tool Steels Deposited by a Directed Energy Deposition Process

Jun Seok Park, Joo Hyun Park, Min-Gyu Lee, Ji Hyun Sung, Kyoung Je Cha, Da Hye Kim

24.02.2016 | Erratum | Ausgabe 5/2016

Erratum to: Surface Selective Oxidation of Sn-Added CMnSi TRIP Steel

Lawrence Cho, Eun Jung Seo, Geun Su Jung, Dong Woo Suh, Bruno C. De Cooman

14.03.2016 | Erratum | Ausgabe 5/2016

Erratum to: Local and Global Mechanical Behavior and Microstructure of Ti6Al4V Parts Built Using Electron Beam Melting Technology

Leila Ladani

Aktuelle Ausgaben

Premium Partner

in-adhesivesMKVSNeuer Inhalt

BranchenIndex Online

Die B2B-Firmensuche für Industrie und Wirtschaft: Kostenfrei in Firmenprofilen nach Lieferanten, Herstellern, Dienstleistern und Händlern recherchieren.

Whitepaper

- ANZEIGE -

Technisches Interface Design - Beispiele aus der Praxis

Eine gute Theorie besticht nur darin, dass am Ende einer Entwicklung sinnvolle und nutzergerechte Produkte herauskommen. Das Forschungs- und Lehrgebiet Technisches Design legt einen starken Wert auf die direkte Anwendung der am Institut generierten wissenschaftlichen Erkenntnisse. Die grundlegenden und trendunabhängigen Erkenntnisse sind Grundlage und werden in der Produktentwicklung angewendet. Nutzen Sie die Erkenntnisse aus den hier ausführlich dargestellten Praxisbespielen jetzt auch für Ihr Unternehmen.
Jetzt gratis downloaden!

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

Bildnachweise