nach oben

Cellulose

Erschienen in:

12.05.2021 | Original Research

Poly(ε-caprolactone) grafting into Scots pine wood: improvement on the dimensional stability, weathering and decay resistance

verfasst von: Mahmut Ali Ermeydan, Mert Babacan, Eylem D. Tomak

Erschienen in: Cellulose | Ausgabe 9/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Wood modification treatments by substitution or blocking of wood hydroxyl groups with hydrophobic molecules are some of the novel approaches that may improve dimensional stability, weathering and decay resistance of wood. In this study, the Scots pine (Pinus sylvestris L.) wood was modified by ring opening polymerization of ε-caprolactone to investigate the artificial weathering and decay resistance. In total, 672 h of artificial weathering was applied on modified wood by exposure of UV-light and water cycles. Additionally, decay test was carried out by using Coniophora puteana and Trametes versicolor fungi on the samples after leaching procedure. After weathering, the color change and contact angle measurements, as well as macroscopic observations revealed that the modified wood had significantly better surface properties than reference wood. FT-IR and SEM analysis proved that there was still polycaprolactone on the weathered surface with some minor crack formations of wood structure. The polycaprolactone modification effectively protected wood against decay even after leaching. This study also demonstrates that the polycaprolactone modification can provide a significant improvement on dimensional stability, as well as water repellence of Scot pine wood.

Graphic abstract

Vorheriger Artikel Fractionation of pulp and precipitated CaCO3–pulp composites: effects on sheet properties of selective CaCO3 precipitation onto fiber size fractions

Nächster Artikel An eco-friendly and durable multifunctional cotton fabric incorporating ZnO and a branched polymer

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abdollahi M, BairamiHabashi R, Mohsenpour M (2019) Poly(ε-caprolactone) chains grafted from lignin, hydroxymethylated lignin and silica/lignin hybrid macroinitiators: synthesis and characterization of lignin-based thermoplastic copolymers. Ind Crops Prod 130:547–557. https://doi.org/10.1016/j.indcrop.2019.01.012CrossRef

Albertsson A-C, Varma IK (2003) Recent developments in ring opening polymerization of lactones for biomedical applications. Biomacromolecules 4:1466–1486. https://doi.org/10.1021/bm034247aCrossRefPubMed

Asif M (2009) Sustainability of timber, wood and bamboo in construction. In: Khatib J et al (eds) Woodhead publishing series in civil and structural engineering. Woodhead Publishing, Cambridge, UK, pp 31–54

Ayadi N, Lejeune F, Charrier F et al (2003) Color stability of heat-treated wood during artificial weathering. Holz Als Roh Und Werkst 61:221–226. https://doi.org/10.1007/s00107-003-0389-2CrossRef

Baur SI, Easteal AJ (2013) Improved photoprotection of wood by chemical modification with silanes: NMR and ESR studies. Polym Adv Technol 24:97–103. https://doi.org/10.1002/pat.3056CrossRef

Cabane E, Keplinger T, Künniger T et al (2016) Functional lignocellulosic materials prepared by ATRP from a wood scaffold. Sci Rep. https://doi.org/10.1038/srep31287CrossRefPubMedPubMedCentral

Carlmark A, Larsson E, Malmström E (2012) Grafting of cellulose by ring-opening polymerization—a review. Eur Polym J 48:1646–1659CrossRef

Dietenberger MA, Green DW, Kretschmann DE et al (1999) Wood handbook—wood as an engineering material. USDA, Washington, DC

Dong Y, Altgen M, Mäkelä M et al (2020) Improvement of interfacial interaction in impregnated wood via grafting methyl methacrylate onto wood cell walls. Holzforschung. https://doi.org/10.1515/hf-2019-0144CrossRef

Emmerich L, Bollmus S, Militz H (2017) Wood modification with DMDHEU (1.3-dimethylol-4.5-dihydroxyethyleneurea)—state of the art, recent research activities and future perspectives. Wood Mater Sci Eng 14:1–16. https://doi.org/10.1080/17480272.2017.1417907CrossRef

Emmerich L, Altgen M, Rautkari L, Militz H (2020) Sorption behavior and hydroxyl accessibility of wood treated with different cyclic N-methylol compounds. J Mater Sci 55:16561–16575. https://doi.org/10.1007/s10853-020-05224-yCrossRef

Ermeydan MA (2014) Wood cell wall modification with hydrophobic molecules. PhD thesis, University of Potsdam, Potsdam

Ermeydan MA (2018) Modification of spruce wood by UV-crosslinked PEG hydrogels inside wood cell walls. React Funct Polym 131:100–106. https://doi.org/10.1016/j.reactfunctpolym.2018.07.013CrossRef

Ermeydan MA, Cabane E, Hass P et al (2014) Fully biodegradable modification of wood for improvement of dimensional stability and water absorption properties by poly(ε-caprolactone) grafting into the cell walls. Green Chem 16:3313–3321. https://doi.org/10.1039/c4gc00194jCrossRef

Ermeydan MA, Kartal ZN, Tomak ED (2019) Effect of process variations of polycaprolactone modification on wood durability, dimensional stability and boron leaching. Holzforschung 73:847–858. https://doi.org/10.1515/hf-2018-0231CrossRef

Evans PD, Owen NL, Schmid S, Webster RD (2002) Weathering and photostability of benzoylated wood. Polym Degrad Stab 76:291–303. https://doi.org/10.1016/S0141-3910(02)00026-5CrossRef

Evans PD, Urban K, Chowdhury MJA (2008) Surface checking of wood is increased by photodegradation caused by ultraviolet and visible light. Wood Sci Technol 42:251–265. https://doi.org/10.1007/s00226-007-0175-0CrossRef

Falkehag SI, Marton J, Adler E (1966) Chromophores in kraft lignin. In: Marton J (ed) Lignin structure and reactions. American Chemical Society, Washington, DC, pp 7–75

Feist WC, Hon DN-S (1984) Chemistry of weathering and protection. In: Marton J (ed) The chemistry of solid wood. American Chemical Society, Washington, DC, pp 11–401

Fengel D, Wegener G (2003) Wood: chemistry, ultrastructure, reactions. Verlag Kessel, Remagen-Oberwinter

Gent AN, Hamed GR (2012) Materials and compounds. In: Gent AN (ed) Engineering with rubber. Carl Hanser Verlag GmbH & Co. KG, Munich, pp 11–36CrossRef

Han X, Wang Z, Zhang Q, Pu J (2020) An effective technique for constructing wood composite with superior dimensional stability. Holzforschung 74:435–443. https://doi.org/10.1515/hf-2019-0176CrossRef

Hill C (2006) Wood modification: chemical, thermal and other processes, Wiley series in renewable resources. Wiley, New York, p 239CrossRef

Hon DN-S, Chang S-T (1984) Surface degradation of wood by ultraviolet light. J Polym Sci Polym Chem Ed 22:2227–2241. https://doi.org/10.1002/pol.1984.170220923CrossRef

Huang Y, Li G, Chu F (2019) Modification of wood cell wall with water-soluble vinyl monomer to improve dimensional stability and its mechanism. Wood Sci Technol 53:1051–1060. https://doi.org/10.1007/s00226-019-01112-0CrossRef

Jebrane M, Sèbe G, Cullis I, Evans PD (2009) Photostabilisation of wood using aromatic vinyl esters. Polym Degrad Stab 94:151–157. https://doi.org/10.1016/j.polymdegradstab.2008.11.013CrossRef

Kalnins MA, Feist WC (1993) Increase in wettability of wood with weathering. For Prod J 43:55–57

Keplinger T, Cabane E, Chanana M et al (2015) A versatile strategy for grafting polymers to wood cell walls. Acta Biomater 11:256–263. https://doi.org/10.1016/j.actbio.2014.09.016CrossRefPubMed

Kiguchi M (1997) Photo-deterioration of chemically modified wood surfaces: acetylated wood and alkylated wood. Jpn Agric Res Q 31:147–154

L’Hostis C, Fredon E, Thévenon M-F et al (2020) Beech wood treated with polyglycerol succinate: a new effective method for its protection and stabilization. Holzforschung 74:351–361. https://doi.org/10.1515/hf-2019-0060CrossRef

Lande S, Westin M, Schneider MH (2004) Eco-efficient wood protection: furfurylated wood as alternative to traditional wood preservation. Manag Environ Qual Int J 15:529–540. https://doi.org/10.1108/14777830410553979CrossRef

Laurichesse S, Avérous L (2014) Chemical modification of lignins: towards biobased polymers. Prog Polym Sci 39:1266–1290. https://doi.org/10.1016/j.progpolymsci.2013.11.004CrossRef

Li N, Chen Y, Yu H et al (2017) Evaluation of optical properties and chemical structure changes in enzymatic hydrolysis lignin during heat treatment. RSC Adv 7:20760–20765. https://doi.org/10.1039/C7RA02005HCrossRef

Mai C, Militz H (2004) Modification of wood with silicon compounds. Inorganic silicon compounds and sol–gel systems: a review. Wood Sci Technol 37:339–348. https://doi.org/10.1007/s00226-003-0205-5CrossRef

Matsuda H (2017) Chemical modification of solid wood. In: Hon DN-S (ed) Chemical modification of lignocellulosic materials. CRC Press, Research Laboratory, Okura Industrial Co., Ltd, Marugame, pp 159–183CrossRef

Mubarok M, Militz H, Dumarçay S, Gérardin P (2020) Beech wood modification based on in situ esterification with sorbitol and citric acid. Wood Sci Technol 54:479–502. https://doi.org/10.1007/s00226-020-01172-7CrossRef

Müller U, Rätzsch M, Schwanninger M et al (2003) Yellowing and IR-changes of spruce wood as result of UV-irradiation. J Photochem Photobiol B Biol 69:97–105CrossRef

Nagarajappa GB, Pandey KK (2016) UV resistance and dimensional stability of wood modified with isopropenyl acetate. J Photochem Photobiol B Biol 155:20–27. https://doi.org/10.1016/j.jphotobiol.2015.12.012CrossRef

Olsén P, Herrera N, Berglund LA (2020) Polymer grafting inside wood cellulose fibers by improved hydroxyl accessibility from fiber swelling. Biomacromolecules 21:597–603. https://doi.org/10.1021/acs.biomac.9b01333CrossRefPubMed

Pandey KK (2005) Study of the effect of photo-irradiation on the surface chemistry of wood. Polym Degrad Stab 90:9–20. https://doi.org/10.1016/J.POLYMDEGRADSTAB.2005.02.009CrossRef

Pandey KK, Chandrashekar N (2006) Photostability of wood surfaces esterified by benzoyl chloride. J Appl Polym Sci 99:2367–2374. https://doi.org/10.1002/app.22685CrossRef

Park I-K, Sun H, Kim S-H et al (2019) Solvent-free bulk polymerization of lignin–polycaprolactone (PCL) copolymer and its thermoplastic characteristics. Sci Rep 9:7033. https://doi.org/10.1038/s41598-019-43296-2CrossRefPubMedPubMedCentral

Rowell RM (2012) Chemical modification of wood. In: Rowell RM (ed) Handbook of wood chemistry and composites, 2nd edn. CRC Press, Boca Raton, p 62CrossRef

Rowell R (2014) Acetylation of wood—a review. Int J Lignocellul Prod 1:1–27. https://doi.org/10.22069/ijlp.2014.1920CrossRef

Rowell RM, Ellis WD (1978) Determination of dimensional stabilization of wood using the water-soak method. Wood Fiber 10:104–111

Sandberg D, Kutnar A, Mantanis G (2017) Wood modification technologies—a review. iFor Biogeosci for 10:895–908. https://doi.org/10.3832/ifor2380-010CrossRef

Sathre R, Gustavsson L (2006) Energy and carbon balances of wood cascade chains. Resour Conserv Recycl 47:332–355. https://doi.org/10.1016/j.resconrec.2005.12.008CrossRef

Sudiyani Y, Takahashi M, Imamura Y, Minato K (1999) Physical and biological properties of chemically modified wood before and after weathering. Wood Res Bull Wood Res Inst Kyoto Univ 86:1–6

Temiz A, Yildiz UC, Aydin I et al (2005) Surface roughness and color characteristics of wood treated with preservatives after accelerated weathering test. Appl Surf Sci 250:35–42. https://doi.org/10.1016/j.apsusc.2004.12.019CrossRef

Temiz A, Terziev N, Jacobsen B, Eikenes M (2006) Weathering, water absorption, and durability of silicon, acetylated, and heat-treated wood. J Appl Polym Sci 102:4506–4513. https://doi.org/10.1002/app.24878CrossRef

Thybring EE (2013) The decay resistance of modified wood influenced by moisture exclusion and swelling reduction. Int Biodeterior Biodegrad 82:87–95. https://doi.org/10.1016/j.ibiod.2013.02.004CrossRef

Vasic S, Stanzl-Tschegg S (2007) Experimental and numerical investigation of wood fracture mechanisms at different humidity levels. Holzforschung 61:367–374. https://doi.org/10.1515/HF.2007.056CrossRef

Vidiella Del Blanco M, Gomez V, Keplinger T et al (2019) Solvent-controlled spatial distribution of SI-AGET-ATRP grafted polymers in lignocellulosic materials. Biomacromolecules 20:336–346. https://doi.org/10.1021/acs.biomac.8b01393CrossRefPubMed

Viitanen H, Toratti T, Makkonen L et al (2010) Towards modelling of decay risk of wooden materials. Eur J Wood Wood Prod 68:303–313. https://doi.org/10.1007/s00107-010-0450-xCrossRef

Zhang X, Chen M, Wang H et al (2015) Characterization of xylan–graft–polycaprolactone copolymers prepared in ionic liquid. Ind Eng Chem Res 54:6282–6290. https://doi.org/10.1021/acs.iecr.5b01323CrossRef

Titel: Poly(ε-caprolactone) grafting into Scots pine wood: improvement on the dimensional stability, weathering and decay resistance
verfasst von: Mahmut Ali Ermeydan
Mert Babacan
Eylem D. Tomak
Publikationsdatum: 12.05.2021
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 9/2021
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-021-03895-7

Springer Professional

Abstract

Graphic abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 9/2021

The preparation and characterization of chemically deuterium incorporated cotton fibers

Modification of ZIF-8 on bacterial cellulose for an efficient selective capture of U(VI)

Multi-functional cotton textiles design using in situ generating zeolitic imidazolate framework-67 (ZIF-67) for effective UV resistance, antibacterial activity, and self-cleaning

Microfibrillated cellulose film with enhanced mechanical and water-resistant properties by glycerol and hot-pressing treatment

An eco-friendly and durable multifunctional cotton fabric incorporating ZnO and a branched polymer

Dyeing behavior and mechanism of Crocein Orange G on carboxymethyl cotton fabric