nach oben

Cellulose

Erschienen in:

22.01.2018 | Original Paper

Role of additives to improve adsorption of xylan on precipitated calcium carbonate

verfasst von: Indrasena Ghosh, Chhaya Sharma, Rita Tandon

Erschienen in: Cellulose | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The development of modified fillers is one of the most promising research outcomes that address the challenges of papermaking such as reduced production cost, improved optical properties, better formation and improved drainage rate. In the present investigation, an attempt has been made to evaluate the interaction of xylan with precipitated calcium carbonate (PCC) through adsorption process with an aim to design novel functional composite filler as an alternative to conventional filler used in papermaking. PCC-xylan interactions were found to be more favourable at 40 °C and at neutral pH. However, adsorption increased when calcium chloride (0.1 M) was introduced as background electrolyte at pH 10.5. Adsorption was found to reach its saturation level within 5 h. In order to maximize the xylan adsorption, the roles of various additives such as slaked lime, polyaluminium chloride (PAC), chitosan and cationic polyacrylamide (CPAM) were explored in this paper. Further, the adsorption isotherms of xylan conducted under various conditions were well fitted to the Langmuir model. Alternatively, dual systems comprising PAC/chitosan and PAC/CPAM showed the best result considering the application of the xylan based composite PCC filler in papermaking. It is also quite interesting to note that isotherms data were best fitted to the Freundlich model in presence of chitosan (6%) or CPAM (0.2%) along with PAC indicating complex multilayer adsorption mechanism.

Vorheriger Artikel Physical structure variations of bacterial cellulose produced by different Komagataeibacter xylinus strains and carbon sources in static and agitated conditions

Nächster Artikel Determination of length distribution of TEMPO-oxidized cellulose nanofibrils by field-flow fractionation/multi-angle laser-light scattering analysis

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ahmad AL, Wong SS, Teng TT, Zuhairi A (2008) Improvement of alum and PACl coagulation by polyacrylamides (PAMs) for the treatment of pulp and paper mill wastewater. Chem Eng J 137:510–517. https://doi.org/10.1016/j.cej.2007.03.088 CrossRef

Aryee FNA, Nickerson MT (2014) Effect of pH, biopolymer mixing ratio and salts on the formation and stability of electrostatic complexes formed within mixtures of lentil protein isolate and anionic polysaccharides (k-carrageenan and gellan gum). Int J Food Sci Technol 49:65–71. https://doi.org/10.1111/ijfs.12275 CrossRef

Bai L, Hu H, Xu J (2012) Influences of configuration and molecular weight of hemicelluloses on their paper-strengthening effects. Carbohydr Polym 88:1258–1263. https://doi.org/10.1016/j.carbpol.2012.02.002 CrossRef

Ban W, van Heiningen ARP (2011) Adsorption of hemicellulose extracts from hardwood onto cellulosic fibers. I. Effects of adsorption and optimization factors. Cellul Chem Technol 45:57–65

Birjandi N, Younesi H, Bahramifar N et al (2013) Optimization of coagulation-flocculation treatment on paper-recycling wastewater: application of response surface methodology. J Environ Sci Heal Part A 48:1573–1582. https://doi.org/10.1080/10934529.2013.797307 CrossRef

Brovkina J, Shulga G, Neiberte B, et al (2015) Difference in the treatment effectiveness of woodworking wastewater between polyaluminium chloride-based coagulants. In: Proceedings of the 10th international scientific and practical conference, pp 64–70

Chauhan VS (2012) Optimization of alkaline sizing to reduce the sizing cost. Yamuna Nagar, India

Chauhan VS, Bhardwaj NK (2017) Efficacy of dispersion of magnesium silicate (talc) in papermaking. Arab J Chem 10:S1059–S1066. https://doi.org/10.1016/j.arabjc.2013.01.012 CrossRef

Chauhan VS, Sharma A, Chakrabarti SK, Varadhan R (2011) Energy savings through increased filler loading in paper vol 23, pp 171–176

Chen Z, Li C, Song Z, Qian X (2014) Modification of precipitated calcium carbonate filler for papermaking with adsorption of cationically derivatized chitosan and carboxymethyl chitosan. BioResources 9:5917–5927

Cheng Y, Luo XL, Betz J et al (2010) In situ quantitative visualization and characterization of chitosan electrodeposition with paired sidewall electrodes. Soft Matter 6:3177–3183. https://doi.org/10.1039/c0sm00124d CrossRef

Chibowski S, Grządka E, Patkowski J (2009) Influence of a type of electrolyte and its ionic strength on the adsorption and the structure of adsorbed polymer layer in the system: polyacrylic acid/SiO₂. Croat Chem Acta 82:623–631

Claesson P (1995) Interactions between mica surfaces in presence of carbohydrates. J Colloid Interface Sci 172:415–425CrossRef

Dada A, Olalekan A, Olatunya A, Dada O (2012) Langmuir, freundlich, temkin and dubinin—radushkevich isotherms studies of equilibrium sorption of Zn²⁺ unto phosphoric acid modified rice husk. J Appl Chem 3:38–45

Danielsson S, Lindström ME (2005) Influence of birch xylan adsorption during kraft cooking on softwood pulp strength. Nord Pulp Pap Res J 20:436–441. https://doi.org/10.3183/NPPRJ-2005-20-04-p436-441 CrossRef

Divakaran R, Sivasankara Pillai VN (2002) Flocculation of river silt using chitosan. Water Res 36:2414–2418. https://doi.org/10.1016/S0043-1354(01)00436-5 CrossRef

Duchesne I, Hult E, Molin U et al (2001) The influence of hemicellulose on fibril aggregation of kraft pulp fibres as revealed by FE-SEM and CP/MAS13C-NMR. Cellulose 8:103–111. https://doi.org/10.1023/A:1016645809958 CrossRef

El A, Khiari R, Bettaieb F, et al (2014) Preparation and application of chemically modified kaolin as fillers in Egyptian kraft bagasse pulp. Appl Clay Sci 101:626–631. https://doi.org/10.1016/j.clay.2014.09.032

Fan J, Li T, Ren Y et al (2017) Interaction between two oppositely charged starches in an aqueous medium containing suspended mineral particles as a basis for the generation of cellulose-compatible composites. Ind Crops Prod 97:417–424. https://doi.org/10.1016/j.indcrop.2016.12.048 CrossRef

Fatehi P, Hamdan FC, Ni Y (2013a) Adsorption of lignocelluloses of pre-hydrolysis liquor on calcium carbonate to induce functional filler. Carbohydr Polym 94:531–538. https://doi.org/10.1016/j.carbpol.2013.01.081 CrossRef

Fatehi P, Shen J, Hamdan FC, Ni Y (2013b) Improving the adsorption of lignocelluloses of prehydrolysis liquor on precipitated calcium carbonate. Carbohydr Polym 92:2103–2110. https://doi.org/10.1016/j.carbpol.2012.11.046 CrossRef

Feng B, Peng J, Zhu X, Huang W (2017) The settling behavior of quartz using chitosan as flocculant. J Mater Res Technol 6:71–76. https://doi.org/10.1016/j.jmrt.2016.09.004 CrossRef

Fernandez-Kim S-O (2004) Physicochemical and functional properties of crawfish chitosan as affected by different processing protocols. Seol National University

Ferreira P, Velho J, Figueiredo M (2005) Effect of thermal treatment on the structure of PCC particles. Tappi J 4:18–22

Hedborg F, Lindström T (1993) Adsorption of cationic starch on a CaCO3 filler. Nord Pulp Pap Res J 8:319–325. https://doi.org/10.3183/NPPRJ-1993-08-03-p319-325 CrossRef

Galván MV, Peresin MS, Mocchiutti P et al (2015) Effects of charge ratios of xylan-poly(allylamine hydrochloride) complexes on their adsorption onto different surfaces. Cellulose 22:2955–2970. https://doi.org/10.1007/s10570-015-0706-z CrossRef

Gaudreault R, Di Cesare N, Van De Ven TGM, Weitz DA (2015) Structure and strength of flocs of precipitated calcium carbonate induced by various polymers used in papermaking. Ind Eng Chem Res 54:6234–6246. https://doi.org/10.1021/acs.iecr.5b00818 CrossRef

Geng ZC, Sun JX, Liang SF et al (2006) Characterization of water- and alkali-soluble hemicellulosic polymers from sugarcane bagasse. Int J Polym Anal Charact 11:209–226. https://doi.org/10.1080/10236660600649095 CrossRef

Han W, Zhao C, Elder T et al (2012) Study on the modification of bleached eucalyptus kraft pulp using birch xylan. Carbohydr Polym 88:719–725. https://doi.org/10.1016/j.carbpol.2012.01.025 CrossRef

Hu G, Fu S, Liu H, Lucia LA (2016) The role of absorbed hemicelluloses on final paper properties and printability. Fibers Polym 17:389–395. https://doi.org/10.1007/s12221-016-4838-z CrossRef

Huang X, Qian X, Li J et al (2015) Starch/rosin complexes for improving the interaction of mineral filler particles with cellulosic fibers. Carbohydr Polym 117:78–82. https://doi.org/10.1016/j.carbpol.2014.09.047 CrossRef

Jiang Z, Zhu J (2014) Cationic polyacrylamide: synthesis and application in sludge dewatering treatment. Asian J Chem 26:629–633. https://doi.org/10.14233/ajchem.2014.16055 CrossRef

Kataja-aho J, Haavisto S, Asikainen J, Vuoti S (2011) The influence of cationized birch xylan on wet and dry strength of fine paper. BioResources 7:1713–1728

Kim E, Xiong Y, Cheng Y et al (2015) Chitosan to connect biology to electronics: fabricating the bio-device interface and communicating across this interface. Polymers (Basel) 7:1–46. https://doi.org/10.3390/polym7010001 CrossRef

Korhonen MHJ, Holappa S, Stenius P, Laine J (2013) Flocculation of fillers with polyelectrolyte complexes. Nord Pulp Pap Res J 28:239–247. https://doi.org/10.3183/NPPRJ-2013-28-02-p239-247 CrossRef

Korhonen MHJ, Rojas OJ, Laine J (2015) Effect of charge balance and dosage of polyelectrolyte complexes on the shear resistance of mineral floc strength and reversibility. J Colloid Interface Sci 448:73–78. https://doi.org/10.1016/j.jcis.2015.01.075 CrossRef

Kuusisto JE, Maloney TC (2015) The effect of carbonation conditions on the properties of carbohydrate-calcium carbonate hybrid pigments. BioResources 10:3277–3292. https://doi.org/10.15376/biores.10.2.3277-3292 CrossRef

Lee SH, Lee HL, Youn HJ (2015) Adsorption of xylan onto cellulose fibers pretreated with cationic polyelectrolyte and its effect on paper properties. BioResources 10:851–865

Lertsutthiwong P, Sutti S, Powtongsook S (2009) Optimization of chitosan flocculation for phytoplankton removal in shrimp culture ponds. Aquac Eng 41:188–193. https://doi.org/10.1016/j.aquaeng.2009.07.006 CrossRef

Libecki B, Dziejowski J (2008) Optimization of humic acids coagulation with aluminum and Iron(III) salts. Polish J Environ Stud 17:397–403

Liu Z, Li X, Xie W (2017) Carrageenan as a dry strength additive for papermaking. PLoS ONE 12:1–11. https://doi.org/10.1371/journal.pone.0171326

Lourenço AF, Simões RS, Costa AP et al (2016) Papermaking trials in a pilot paper machine with a new silica coated PCC filler. Nord Pulp Pap Res J 31:341–346. https://doi.org/10.3183/NPPRJ-2016-31-02-p341-346 CrossRef

Luo Y, Pan X, Ling Y et al (2014) Facile fabrication of chitosan active film with xylan via direct immersion. Cellulose 21:1873–1883. https://doi.org/10.1007/s10570-013-0156-4 CrossRef

Mansoor Ahmad Z (2012) Xylan as strength enhancing additive. KTH Royal Institute of Technology

Marton J (1991) Paper chemistry. Springer, Netherland

Mehdinejad MH, Bina B, Nikaeen M, Attar HM (2009) Effectiveness of chitosan as natural coagulant aid in removal of turbidity and bacteria from turbid waters. J Food Agric Environ 7:845–850

Mocchiutti P, Schnell CN, Rossi GD et al (2016) Cationic and anionic polyelectrolyte complexes of xylan and chitosan. Interaction with lignocellulosic surfaces. Carbohydr Polym 150:89–98. https://doi.org/10.1016/j.carbpol.2016.04.111 CrossRef

Mohammadi AS, Mobarakian A, Taherkhani F et al (2014) Effect of Chitosan as a coagulant aid combined with poly aluminum chloride removing of turbidity from drinking water. Avicenna J Env Heal Eng. https://doi.org/10.5812/ajehe.187

Ng M, Liana AE, Liu S et al (2012) Preparation and characterisation of new-polyaluminum chloride-chitosan composite coagulant. Water Res 46:4614–4620. https://doi.org/10.1016/j.watres.2012.06.021 CrossRef

Nicu R, Bobu E, Desbrieres J (2011) Chitosan as cationic polyelectrolyte in wet-end papermaking systems. Cellul Chem Technol 45:105–111

Oksanen T, Buchert J, Viikari L (1997) The role of hemiocelluloses in the hornification of bleached kraft pulps. Holzforschung 51:355–360CrossRef

Österberg M, Laine J, Stenius P et al (2001) Forces between xylan-coated surfaces: effect of polymer charge density and background electrolyte. J Colloid Interface Sci 242:59–66. https://doi.org/10.1006/jcis.2001.7752 CrossRef

Ostolska I (2013) Influence of the electrolyte type on the adsorption and electrokinetic properties of the ionic polyamino acids—Cr₂O₃ system. Ann UMCS Chem 68:75–93

Peng P, Garnier G (2010) Effect of cationic polyacrylamide adsorption kinetics and ionic strength on precipitated calcium carbonate flocculation. Langmuir 26:16949–16957. https://doi.org/10.1021/la103410j CrossRef

Peng Y, He B, Zhao L (2015) Lime mud CaCO₃ for use as a filler material in papermaking: impact of its preflocculation with cationic polyacrylamide

Pereira CS, Silveira RL, Dupree P, Skaf MS (2017) Effects of xylan side-chain substitutions on xylan-cellulose interactions and implications for thermal pretreatment of cellulosic biomass. Biomacromol 18:1311–1321. https://doi.org/10.1021/acs.biomac.7b00067 CrossRef

Randtke SJ, Thiel CE, Liao MY et al (2016) Removing soluble organic contaminants by lime-softening. Am Water Work Assoc 74:192–202CrossRef

Rasteiro MG, Pinheiro I, Ahmadloo H et al (2015) Correlation between flocculation and adsorption of cationic polyacrylamides on precipitated calcium carbonate. Chem Eng Res Des 95:298–306. https://doi.org/10.1016/j.cherd.2014.11.007 CrossRef

Şakar-Deliormanli A, Çelik E, Polat M (2008) Adsorption of anionic polyelectrolyte and comb polymers onto lead magnesium niobate. Colloids Surf A Physicochem Eng Asp 316:202–209. https://doi.org/10.1016/j.colsurfa.2007.09.004 CrossRef

Sang Y, Englezos P (2012) Flocculation of precipitated calcium carbonate (PCC) by cationic tapioca starch with different charge densities. II: Population balance modeling. Colloids Surf A Physicochem Eng Asp 414:520–526. https://doi.org/10.1016/j.colsurfa.2012.07.028 CrossRef

Schroeder RP, Rubin JA (1984) Aggregation and colloidal stability of fine-particle coal suspensions. Environ Sci Technol 18:264–271CrossRef

Seo YB, Choi JS, Ji SG (2017) Stability of pre-treated fillers for high loaded printing paper. Korean Chem 55:1–6

Shen J, Song Z, Qian X, Liu W (2009) Modification of papermaking grade fillers: a brief review. BioResources 4:1190–1209. https://doi.org/10.15376/BIORES.4.3.1190-1209

Somasundaran P (1985) 1&1 surface precipitation of inorganics and surfactants and its role in adsorption and flotation. Colloids Surf 13:151–167CrossRef

Strom G, Barla P, Stenius P (1985) The formation of polyelectrolyte. Colloids Surf 13:193–207CrossRef

Tekin N, Demirbaş Ö, Alkan M (2005) Adsorption of cationic polyacrylamide onto kaolinite. Microporous Mesoporous Mater 85:340–350. https://doi.org/10.1016/j.micromeso.2005.07.004 CrossRef

Vandamme D, Foubert I, Fraeye I et al (2012) Flocculation of Chlorella vulgaris induced by high pH: role of magnesium and calcium and practical implications. Bioresour Technol 105:114–119. https://doi.org/10.1016/j.biortech.2011.11.105 CrossRef

Wang Z, Wang X, Fu Y, Qin M (2015) RSC Advances Saccharide separation from wood prehydrolysis liquor: comparison of selectivity toward non- saccharide compounds with separate techniques. RSC Adv 5:28925–28931. https://doi.org/10.1039/C4RA17017B CrossRef

Yang Q, Zhang M, Song S, Yang B (2017) Surface modification of PCC filled cellulose paper by MOF-5 (Zn3(BDC)2) metal–organic frameworks for use as soft gas adsorption composite materials. Cellulose 24:3051–3060. https://doi.org/10.1007/s10570-017-1331-9 CrossRef

Yu Y, Xue G, Gu C et al (2013) Preparation of Chitosan modified talc and its application in high filler content paper. J Appl Polym Sci 129:2692–2698. https://doi.org/10.1002/app.38992 CrossRef

Zhang H, Wang Y, Bai P et al (2015a) Adsorptive separation of acetic acid from dilute aqueous solutions: adsorption kinetic, isotherms, and thermodynamic studies. J Chem Eng Data 61:213–219. https://doi.org/10.1021/acs.jced.5b00481 CrossRef

Zhang Y, Yildirim E, Antila HS et al (2015b) The influence of ionic strength and mixing ratio on the colloidal stability of PDAC/PSS polyelectrolyte complexes. Soft Matter 11:7392–7401. https://doi.org/10.1039/C5SM01184A CrossRef

Zhou FS, Li J, Zhou L, Liu Y (2015) Preparation and mechanism of a new enhanced flocculant based on bentonite for drinking water. Adv Mater Sci Eng. https://doi.org/10.1155/2015/579513

Titel: Role of additives to improve adsorption of xylan on precipitated calcium carbonate
verfasst von: Indrasena Ghosh
Chhaya Sharma
Rita Tandon
Publikationsdatum: 22.01.2018
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 3/2018
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-018-1666-x

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 3/2018

Structure development in the condensed state of cellulose fiber regenerated from alkali complex solution

Fabrication of carboxymethyl-functionalized porous ramie microspheres as effective adsorbents for the removal of cadmium ions

Carbon/ZnO nanorods composites templated by TEMPO-oxidized cellulose and photocatalytic activity for dye degradation

A study on the transmission haze and mechanical properties of highly transparent paper with different fiber species

Activated carbon derived from chitin aerogels: preparation and CO2 adsorption

A modified single-constant Kubelka–Munk model for color prediction of pre-colored fiber blends