nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

10.02.2022 | ORIGINAL ARTICLE

Soft computing-based process optimization in laser metal deposition of Ti-6Al-4 V

verfasst von: Chukwubuikem C. Ngwoke, Rasheedat M. Mahamood, Victor S. Aigbodion, Tien-Chen Jen, Paul A. Adedeji, Esther T. Akinlabi

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Parameter optimization is significant to a successful laser metal deposition (LMD). While conventional optimization methods have been used, the prowess of soft computing techniques is still less explored in LMD towards ensuring reduced experimental costs and throughput. This study develops a process optimization and wear volume prediction model for Ti-6Al-4 V using soft computing techniques. The particle swarm optimization (PSO) model was used to optimize a single objective function to determine optimal process parameters. A supervised learning model using artificial neural network (ANN) was developed to predict the wear volume from known process parameters. The model hyperparameters were tuned by several trials until optimal parameters were obtained. The ANN model was trained and tested with 70% and 30% of the dataset, respectively. The ANN model was evaluated using known statistical performance metrics and user-friendly interfaces, where process optimization can be carried out within upper and lower design bounds, which were developed for the two intelligent models. From the model evaluation result, a root mean square error (RMSE) of 0.0052, mean absolute deviation (MAD) of 0.0031, coefficient of determination (R²) of 0.9733, and a mean absolute percentage error (MAPE) of 14.0152 was obtained from the model testing phase. Overall, soft computing techniques prove helpful in ensuring process integrity, efficient, and cost-effective LMD.

Vorheriger Artikel Effect of porosity of aluminum foam on welding between aluminum foam and polycarbonate plate during friction welding

Nächster Artikel An improved SegNet network model for accurate detection and segmentation of car body welding slags

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ahuett-Garza H, Kurfess T (2018) A brief discussion on the trends of habilitating technologies for Industry 4.0 and smart manufacturing. Manuf Lett 15:60–63. https://doi.org/10.1016/j.mfglet.2018.02.011

Tamez MBA, Taha I (2021) A review of additive manufacturing technologies and markets for thermosetting resins and their potential for carbon fiber integration. Addit Manuf 37:101748. https://doi.org/10.1016/j.addma.2020.101748CrossRef

Sun Y, Hao M (2012) Statistical analysis and optimization of process parameters in Ti6Al4V laser cladding using Nd:YAG laser. Opt Lasers Eng 50:985–995. https://doi.org/10.1016/j.optlaseng.2012.01.018CrossRef

Greulich MD-I (2017) Rapid prototyping and fabrication of tools and metal parts by laser sintering of metal powders. Mater Technol 12:155–159. https://doi.org/10.1080/10667857.1997.11752749

Mohamed OA, Masood SH, Bhowmik JL (2015) Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Adv Manuf 3:42–53. https://doi.org/10.1007/s40436-014-0097-7CrossRef

Amine T, Newkirk JW, Liou F (2014) An investigation of the effect of direct metal deposition parameters on the characteristics of the deposited layers. Case Stud Therm Eng. https://doi.org/10.1016/j.csite.2014.02.002CrossRef

Farayibi PK, Folkes JA, Clare AT, Farayibi PK, Folkes JA, Clare AT (2013) Laser deposition of Ti-6Al-4V wire with WC powder for functionally graded components laser deposition of Ti-6Al-4V wire with WC powder for functionally graded components. Mater Manuf Process 28:514–518. https://doi.org/10.1080/10426914.2012.718477CrossRef

Hu Y, Cong W (2018) A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites. Ceram Int 44:20599–20612. https://doi.org/10.1016/j.ceramint.2018.08.083CrossRef

Selcuk C (2011) Laser metal deposition for powder metallurgy parts. Powder Metall 54:94–99. https://doi.org/10.1179/174329011X12977874589924CrossRef

10.

Dutta B, Froes FHS (2017) The additive manufacturing (AM) of titanium alloys. Met Powder Rep 72:96–106. https://doi.org/10.1016/j.mprp.2016.12.062CrossRef

11.

Liu S, Shin YC (2019) Additive manufacturing of Ti6Al4V alloy: a review. Mater Des 164:107552. https://doi.org/10.1016/j.matdes.2018.107552CrossRef

12.

Calignano F, Manfredi D, Ambrosio EP, Biamino S, Lombardi M, Atzeni E et al (2017) Overview on additive manufacturing technologies. Proc IEEE 105:593–612. https://doi.org/10.1109/JPROC.2016.2625098CrossRef

13.

Majumdar JD, Pinkerton A, Liu Z, Manna I, Li L (2005) Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel. Appl Surf Sci 247:320–327. https://doi.org/10.1016/j.apsusc.2005.01.039CrossRef

14.

Shamsaei N, Yadollahi A, Bian L, Thompson SM (2015) An overview of direct laser deposition for additive manufacturing; part II: Mechanical behavior, process parameter optimization and control. Addit Manuf 8:12–35. https://doi.org/10.1016/j.addma.2015.07.002CrossRef

15.

Canel T, Zeren M, Sınmazçelik T (2019) Laser parameters optimization of surface treating of Al 6082–T6 with Taguchi method. Opt Laser Technol 120:105714. https://doi.org/10.1016/j.optlastec.2019.105714CrossRef

16.

Manikandan N, Raju R, Palanisamy D, Kumar S (2018) Science Direct investigation on Ti6Al4V laser metal deposition using Taguchi based grey approach. Mater Today Proc 5:14375–14383. https://doi.org/10.1016/j.matpr.2018.03.022CrossRef

17.

Muhammad W, Brahme AP, Ibragimova O, Kang J, Inal K (2021) A machine learning framework to predict local strain distribution and the evolution of plastic anisotropy & fracture in additively manufactured alloys. Int J Plast 136:102867. https://doi.org/10.1016/j.ijplas.2020.102867CrossRef

18.

Wang C, Tan XP, Tor SB, Lim CS (2020) Machine learning in additive manufacturing: State-of-the-art and perspectives. Addit Manuf 36:101538. https://doi.org/10.1016/j.addma.2020.101538CrossRef

19.

Yan J (2016) Optimal design of process parameters during laser direct metal deposition of multi-material parts. All Diss 1813

20.

Zadeh LA (1994) Fuzzy logic, neural networks and soft computing. Commun ACM 37:77–84CrossRef

21.

Adedeji PA, Akinlabi S, Madushele N, Olatunji OO (2020) Wind turbine power output very short-term forecast: a comparative study of data clustering techniques in a PSO-ANFIS model. J Clean Prod 254:1–16. https://doi.org/10.1016/j.jclepro.2020.120135CrossRef

22.

Choudhury B, Jha RM (2016) Soft computing techniques. Soft Comput Electromagn Methods Appl. Cambridge University Press. pp 9–44. https://doi.org/10.1533/9781782421801.39

23.

Anoune K, Bouya M, Astito A, Abdellah AB (2018) Sizing methods and optimization techniques for PV-wind based hybrid renewable energy system: a review. Renew Sustain Energy Rev 93:652–673. https://doi.org/10.1016/j.rser.2018.05.032

24.

Chowdhury S, Mhapsekar K, Anand S (2017) Part build orientation optimization and neural network-based geometry compensation for additive manufacturing process. J Manuf Sci Eng 140. https://doi.org/10.1115/1.4038293

25.

Okaro IA, Jayasinghe S, Sutcli C, Black K, Paoletti P, Green PL (2019) Automatic fault detection for laser powder-bed fusion using semi-supervised machine learning. Addit Manuf Manuf 27:42–53. https://doi.org/10.1016/j.addma.2019.01.006CrossRef

26.

Noriega A, Blanco D, Alvarez BJ, Garcia A (2013) Dimensional accuracy improvement of FDM square cross-section parts using artificial neural networks and an optimization algorithm. Int J Adv Manuf Technol 69:2301–2313. https://doi.org/10.1007/s00170-013-5196-2CrossRef

27.

Tippayawanakorn N, Pichitlamken J (2012) Nelder-Mead method with local selection using neighborhood and memory for optimization via simulation. Adv Methods Tech Appl Model Simul. Springer. pp 134–143

28.

Kotsiopoulos T, Sarigiannidis P, Ioannidis D (2021) Machine learning and deep learning in smart manufacturing: the smart grid paradigm. Comput Sci Rev 40:100341. https://doi.org/10.1016/j.cosrev.2020.100341MathSciNetCrossRef

29.

Casalino G, Ludovico A (2002) Parameter selection by an artificial neural network for a laser bending process. Proc Inst Mech Eng Part B J Eng Manuf 216:1517–1520. https://doi.org/10.1243/095440502320783350CrossRef

30.

Lu ZL, Li DCÃ, Lu BH, Zhang AF, Zhu GX, Pi G (2010) The Prediction of the building precision in the laser engineered net shaping process using advanced networks. Opt Lasers Eng 48:519–525. https://doi.org/10.1016/j.optlaseng.2010.01.002CrossRef

31.

Fahle S, Prinz C, Kuhlenkötter B (2020) Systematic review on machine learning (ML) methods for manufacturing processes - identifying artificial intelligence (AI) methods for field application. Procedia CIRP 93:413–418. https://doi.org/10.1016/j.procir.2020.04.109CrossRef

32.

Jin Z, Zhang Z, Demir K, Gu GX (2020) Machine learning for advanced additive manufacturing. Matter 3:1541–1556. https://doi.org/10.1016/j.matt.2020.08.023

33.

Frank AG, Dalenogare LS, Ayala NF (2019) Industry 4.0 technologies: implementation patterns in manufacturing companies. Int J Prod Econ 210:15–26. https://doi.org/10.1016/j.ijpe.2019.01.004

34.

Mahamood RM, Akinlabi ET (2015) Effect of laser power and powder flow rate on the wear resistance behaviour of laser metal deposited TiC/Ti6Al4V composites. Mater Today Proc 2:2679–2686. https://doi.org/10.1016/j.matpr.2015.07.233CrossRef

35.

Mahamood RM, Akinlabi ET, Shukla M, Pityana S (2013) Laser metal deposition of Ti6Al4V: a study on the effect of laser power on microstructure and microhardness. Lect Notes Eng Comput Sci 2203:994–999

36.

Mahamood RM, Akinlabi ET (2016) Laser power and scanning speed influence on intermetallic and wear behaviour of Laser metal deposited titanium alloy composite. Lect Notes Eng Comput Sci 2226:1037–1040

37.

Housny H, Chater EA, El Fadil H (2020) PSO-based ANFIS for quadrotor system trajectory-tracking control. 2020 1st Int Conf Innov Res Appl Sci Eng Technol IRASET 2020:0–5. https://doi.org/10.1109/IRASET48871.2020.9092015

38.

Adedeji PA, Akinlabi SA, Olatunji OO (2020) Hybrid neurofuzzy wind power forecast and wind turbine location for embedded generation. Int J Energy Res 1–16. https://doi.org/10.1002/er.5620

39.

Engelbrecht AP (2007) Computational intelligence: an introduction

40.

van den Bergh F, Engelbrecht AP (2006) A study of particle swarm optimization particle trajectories. Inf Sci (Ny) 176:937–971MathSciNetCrossRef

41.

Yu H, Wilamowski B (2011) Levenberg–Marquardt training. Intell Syst 1–16. https://doi.org/10.1201/b10604-15

42.

Costa M, Braga A, Menezes B (2007) Improving generalization of MLPs with sliding mode control and the Levenberg–Marquardt algorithm. Neurocomputing 70:1342–1347. https://doi.org/10.1371/journal.pone.0088408CrossRef

43.

Içer S, Kara S, Güven A (2006) Comparison of multilayer perceptron training algorithms for portal venous doppler signals in the cirrhosis disease. Expert Syst Appl 31:406–413. https://doi.org/10.1016/j.eswa.2005.09.037CrossRef

44.

Demuth H, Beale M (2004). Neural Network Toolbox. https://doi.org/10.1016/j.neunet.2005.10.002CrossRef

45.

Yavari S, Zoej MJV, Mokhtarzade M, Mohammadzadeh A (2012) Comparison of particle swarm optimization and genetic algorithm in rational function model optimization. ISPRS - Int Arch Photogramm Remote Sens Spat Inf Sci XXXIX-B1:281–4. https://doi.org/10.5194/isprsarchives-xxxix-b1-281-2012

46.

Minitab Express (2019) Interpret all statistics and graphs for Simple Regression. https://support.minitab.com/en-us/minitab-express/1/help-and-how-to/modeling-statistics/regression/how-to/simple-regression/interpret-the-results/all-statistics-and-graphs/#vif. Accessed 13 Feb 2021

47.

Yan L, Chen Y, Liou F (2020) Additive manufacturing of functionally graded metallic materials using laser metal deposition. Addit Manuf 31:100901. https://doi.org/10.1016/j.addma.2019.100901CrossRef

Titel: Soft computing-based process optimization in laser metal deposition of Ti-6Al-4 V
verfasst von: Chukwubuikem C. Ngwoke
Rasheedat M. Mahamood
Victor S. Aigbodion
Tien-Chen Jen
Paul A. Adedeji
Esther T. Akinlabi
Publikationsdatum: 10.02.2022
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-08781-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2022

Effect of coupling misalignment fault on vibration response and machined surface topography in ultra-precision lathe turning

Impact of material data in assembly delay prediction—a machine learning-based case study in machinery industry

Direct metal laser sintering of Ti-6Al-4V parts with reused powder

Machinability investigations through novel controlled flushing characteristics in wire electric discharge machining of M42 high-speed steel

Modeling the effect of electrode morphology on Mg/steel resistance spot welding

The brazing of Al2O3 ceramic and other materials

Premium Partner

Marktübersichten