Production Engineering 1/2020

Open Access 14.01.2020 | Editorial

Potential and status of damage controlled forming processes

Gerhard Hirt, A. Erman Tekkaya, Till Clausmeyer, Johannes Lohmar

PDF-Version jetzt herunterladen Zum Volltext

16.11.2019 | Production Process

Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling

Muhammad Imran, Muhammad Junaid Afzal, Johannes Buhl, Markus Bambach, Anthony Dunlap, Alexander Schwedt, Anke Aretz, Shuhan Wang, Johannes Lohmar, Gerhard Hirt

Open Access 13.01.2020 | Production Process

Torsion plastometer trials to investigate the effect of non-proportional loading paths in caliber rolling on damage and performance of metal parts

Shuhan Wang, Anthony Dunlap, Kerstin Möhring, Johannes Lohmar, Alexander Schwedt, Anke Aretz, Frank Walther, Gerhard Hirt

PDF-Version jetzt herunterladen Zum Volltext

14.12.2019 | Production Process

Prediction and analysis of damage evolution during caliber rolling and subsequent cold forward extrusion

Alexander Schowtjak, Shuhan Wang, Oliver Hering, Till Clausmeyer, Johannes Lohmar, Robin Schulte, Richard Ostwald, Gerhard Hirt, A. Erman Tekkaya

30.11.2019 | Production Process

Modelling of void healing in hot rolling due to recrystallization

Xinyang Li, Conrad Liebsch, Gerhard Hirt, Johannes Lohmar

Open Access 09.11.2019 | Production Process

Blanking induced damage in thin 3.2% silicon steel sheets

H. Ghadbeigi, A. Al-Rubaye, F. C. J. Robinson, D. Hawezy, S. Birosca, K. Atallah

PDF-Version jetzt herunterladen Zum Volltext

20.11.2019 | Production Process

Investigation on the influence of damage on the fatigue strength of hot rolled sheet metal

Conrad Liebsch, Kerstin Möhring, Johannes Lohmar, Frank Walther, Gerhard Hirt

18.11.2019 | Quality Assurance

Micro-magnetic damage characterization of bent and cold forged parts

Lisa Samfaß, Nikolas Baak, Rickmer Meya, Oliver Hering, A. Erman Tekkaya, Frank Walther

12.11.2019 | Production Process

Biaxial experiments on characterization of stress-state-dependent damage in ductile metals

Michael Brünig, Moritz Zistl, Steffen Gerke

23.11.2019 | Quality Assurance

Efficient characterization tools for deformation-induced damage at different scales

Carl F. Kusche, Anthony Dunlap, Felix Pütz, Chunhua Tian, Christoph Kirchlechner, Anke Aretz, Alexander Schwedt, Talal Al-Samman, Sebastian Münstermann, Sandra Korte-Kerzel

06.12.2019 | Production Process

Stress-state dependent formability modelling in hot stamping

Giulia Venturato, Andrea Ghiotti, Stefania Bruschi

02.01.2020 | Production Process

Influence of anisotropic damage evolution on cold forging

Kai Langenfeld, Alexander Schowtjak, Robin Schulte, Oliver Hering, Kerstin Möhring, Till Clausmeyer, Richard Ostwald, Frank Walther, A. Erman Tekkaya, Jörn Mosler

25.11.2019 | Production Process

On mesh dependencies in finite-element-based damage prediction: application to sheet metal bending

Leon Sprave, Alexander Schowtjak, Rickmer Meya, Till Clausmeyer, A. Erman Tekkaya, Andreas Menzel

Springer Professional

Production Engineering

Ausgabe 1/2020

Damage controlled forming processes

Inhaltsverzeichnis (13 Artikel)

Potential and status of damage controlled forming processes

Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling

Torsion plastometer trials to investigate the effect of non-proportional loading paths in caliber rolling on damage and performance of metal parts

Prediction and analysis of damage evolution during caliber rolling and subsequent cold forward extrusion

Modelling of void healing in hot rolling due to recrystallization

Blanking induced damage in thin 3.2% silicon steel sheets

Investigation on the influence of damage on the fatigue strength of hot rolled sheet metal

Micro-magnetic damage characterization of bent and cold forged parts

Biaxial experiments on characterization of stress-state-dependent damage in ductile metals

Efficient characterization tools for deformation-induced damage at different scales

Stress-state dependent formability modelling in hot stamping

Influence of anisotropic damage evolution on cold forging

On mesh dependencies in finite-element-based damage prediction: application to sheet metal bending

Aktuelle Ausgaben

Ausgabe 2-3/2022

Ausgabe 1/2022

Ausgabe 6/2021

Ausgabe 5/2021

Ausgabe 3-4/2021

Ausgabe 2/2021

Ausgabe 1/2021

Ausgabe 5-6/2020

Ausgabe 4/2020

Ausgabe 3/2020

Premium Partner

Marktübersichten