nach oben

Journal of Materials Engineering and Performance

Erschienen in:

25.05.2022 | Technical Article

Through-Thickness Fiber Formation Integrated into Carbon-Fiber-Reinforced Thermoplastic Laminate Welding Method

verfasst von: D. Tatsuno, R. Tanaka, T. Yoneyama

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A new process for forming through-thickness fibers in the joints of carbon-fibre-reinforced thermoplastic laminates by causing discontinuous fibres to flow into the drill holes of a laminate under pressure was developed. The advantage of this method is that it can efficiently form through-thickness fibers using the conventional welding process, with the only additions of holes in the laminates and discontinuous fiber sheets. In this study, the effect of through-thickness fibers formed by the proposed method on the joint strength was investigated via single-lap welding experiments. The areas of improvement and application prospects of the proposed method are discussed in this paper. Thus, this paper presents the first step in developing this method and demonstrates its potential.

Vorheriger Artikel Hot Workability and Microstructural Evolution of Powder Metallurgy Ti-22Al-24Nb-0.5Mo Alloy during Hot Compression

Nächster Artikel Ultrasonic-Assisted Shearing Characteristics of Fe-Based Amorphous Alloy Strips

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. Yousefpour, M. Hojjati and J.-P. Immarigeon, Fusion Bonding/Welding of Thermoplastic Composites, J. Thermoplast. Compos. Mater., 2004, 17, p 303–341. https://doi.org/10.1177/0892705704045187CrossRef

I.F. Villegas, Ultrasonic Welding of Thermoplastic Composites, Front. Mater., 2019 https://doi.org/10.3389/FMATS.2019.00291/PDFCrossRef

T. Bayerl, M. Duhovic, P. Mitschang and D. Bhattacharyya, The Heating of Polymer Composites by Electromagnetic Induction - A Review, Compos. Part A: Appl. Sci. Manuf., 2014, 57, p 27–40. https://doi.org/10.1016/j.compositesa.2013.10.024CrossRef

Y. Huang, X. Meng, Y. Xie, Z. Lv, L. Wan, J. Cao and J. Feng, Friction Spot Welding of Carbon Fiber-Reinforced Polyetherimide Laminate, Compos. Struct., 2018, 189, p 627–634. https://doi.org/10.1016/J.COMPSTRUCT.2018.02.004CrossRef

A.P. Mouritz, Review of Z-Pinned Composite Laminates, Compos. A Appl. Sci. Manuf., 2007, 38(12), p 2383–2397. https://doi.org/10.1016/J.COMPOSITESA.2007.08.016CrossRef

A.P. Mouritz and B.N. Cox, A Mechanistic Interpretation of the Comparative in-Plane Mechanical Properties of 3D Woven, Stitched and Pinned Composites, Compos. A Appl. Sci. Manuf., 2010, 41(6), p 709–728. https://doi.org/10.1016/J.COMPOSITESA.2010.02.001CrossRef

N. Sarantinos, S. Tsantzalis, S. Ucsnik and V. Kostopoulos, Review of Through-the-Thickness Reinforced Composites in Joints, Compos. Struct., 2019, 229, 111404. https://doi.org/10.1016/J.COMPSTRUCT.2019.111404CrossRef

T.M. Koh, S. Feih and A.P. Mouritz, Experimental determination of the Structural Properties and Strengthening Mechanisms of Z-Pinned Composite T-Joints, Compos. Struct., 2011, 93(9), p 2222–2230. https://doi.org/10.1016/J.COMPSTRUCT.2011.03.009CrossRef

T.M. Koh, S. Feih and A.P. Mouritz, Strengthening Mechanics of Thin and Thick Composite T-Joints Reinforced with Z-Pins, Compos. A Appl. Sci. Manuf., 2012, 43(8), p 1308–1317. https://doi.org/10.1016/J.COMPOSITESA.2012.03.023CrossRef

10.

M. Li, P. Chen, X. Li and N. Gong, Experimental and Numerical Study on the Tensile Properties of T-Joints with Low Z-Pin Volume Density, Polym. Compos., 2020, 41, p 258–270.CrossRef

11.

M. Li, P. Chen, X. Li, J. Zheng and W. Dong, Capacities of Z-Pinning in Improving the Bending Performance of Composite T-Joints, Polym. Compos., 2020, 41, p 2125–2133. https://doi.org/10.1002/pc.25525CrossRef

12.

C. Li, Y. Sun, C. Duan and R. Li, Study on Properties of Z-Pin-Reinforced and Rivet-Reinforced Composite T-Joint: Experiment and Simulation, Appl. Compos. Mater, 2021, 28(395), p 408. https://doi.org/10.1007/s10443-021-09866-2CrossRef

13.

R. Li, N. Huong, A. Crosky, A.P. Mouritz, D. Kelly and P. Chang, Improving Bearing Performance of Composite Bolted Joints Using Z-Pins, Compos. Sci. Tech., 2009, 69(7–8), p 883–889. https://doi.org/10.1016/J.COMPSCITECH.2008.12.005CrossRef

14.

M. Grassi, B. Cox and X. Zhang, Simulation of Pin-Reinforced Single-Lap Composite Joints, Compos. Sci. Tech., 2006, 66(11–12), p 1623–1638. https://doi.org/10.1016/J.COMPSCITECH.2005.11.013CrossRef

15.

P. Chang, A.P. Mouritz and B.N. Cox, Properties and Failure Mechanisms of Pinned Composite Lap Joints in Monotonic and Cyclic Tension, Compos. Sci. Technol., 2006, 66(13), p 2163–2176. https://doi.org/10.1016/J.COMPSCITECH.2005.11.039CrossRef

16.

K. Pingkarawat and A.P. Mouritz, Comparative Study of Metal and Composite Z-Pins for Delamination Fracture and Fatigue Strengthening of Composites, Eng. Fract. Mech., 2016, 154, p 180–190. https://doi.org/10.1016/J.ENGFRACMECH.2016.01.003CrossRef

17.

B. M’membe, S. Gannon, M. Yasaee, S. R. Hallett and I. K. Partridge, Mode II Delamination Resistance of Composites Reinforced with Inclined Z-Pins, Mater. Des., 2016, 94(565), p 572. https://doi.org/10.1016/J.MATDES.2016.01.051CrossRef

18.

B. M’membe, M. Yasaee, S. R. Hallett and I. K. Partridge, Effective Use of Metallic Z-Pins for Composites’ Through-Thickness Reinforcement, Compos. Sci. Tech., 2019, 175(77), p 84. https://doi.org/10.1016/J.COMPSCITECH.2019.02.024CrossRef

19.

J. Hoffmann and G. Scharr, Mechanical Properties of Composite Laminates Reinforced with Rectangular Z-Pins in Monotonic and Cyclic Tension, Compos. A Appl. Sci. Manuf., 2018, 109, p 163–170. https://doi.org/10.1016/J.COMPOSITESA.2018.03.004CrossRef

20.

D.D.R. Cartié, G. Dell’Anno, E. Poulin and I.K. Partridge, 3D Reinforcement of Stiffener-to-Skin T-Joints by Z-Pinning and Tufting, Eng. Fract. Mech., 2006, 73(16), p 2532–2540. https://doi.org/10.1016/J.ENGFRACMECH.2006.06.012CrossRef

21.

Q. Song, Y. Li, J. Qi, L. Wen, J. Xiao and J. Ni, Study on an Automatic Multi-Pin Insertion System for Preparing Z-Pin Composite Laminates, Chin. J. Aeronaut., 2014, 27(2), p 413–419. https://doi.org/10.1016/J.CJA.2014.02.012CrossRef

22.

S. Fei, W. Wang, H. Wang, D. Yang, H. Ding, H. Wang, J. Li and Y. Ke, Effect of Ø 0.11 mm Z-Pinning on the Properties of Composite Laminates Via an Ultrasound Guided Insertion Process, Compos. Sci. and .Techn., 2021, 213, p 108906. https://doi.org/10.1016/J.COMPSCITECH.2021.108906CrossRef

23.

T. Löbel, B. Kolesnikov, S. Scheffler, A. Stahl and C. Hühne, Enhanced Tensile Strength of Composite Joints by Using Staple-Like Pins: Working Principles and Experimental Validation, Compos. Struct., 2013, 106, p 453–460. https://doi.org/10.1016/J.COMPSTRUCT.2013.06.020CrossRef

24.

K. Obunai, T. Fukuta, K. Ozaki and Y. Morikawa, Effect of Hot Needle Punching on Bending and Inter-Laminar Characteristics of CF/PA6 Composite, Mechanical Engineering Journal, 2016, 3(4), p 15-00610-15–00610. https://doi.org/10.1299/mej.15-00610CrossRef

25.

J. Hoffmann, A. Brast and G. Scharr, Z-pin Insertion Process for Through-Thickness Reinforced Thermoplastic Composites, J. Compos. Mater., 2019 https://doi.org/10.1177/0021998318781233CrossRef

Titel: Through-Thickness Fiber Formation Integrated into Carbon-Fiber-Reinforced Thermoplastic Laminate Welding Method
verfasst von: D. Tatsuno
R. Tanaka
T. Yoneyama
Publikationsdatum: 25.05.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07010-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2022

Effects of Heat Treatment on Direct Laser Fabricated Stainless Steel 420-Inconel 718 Alloy Multi-material Structures

Mechanical and Corrosion Study of Gas Tungsten Arc Welding-Based SS-304L Wire Arc Additive Manufacturing Components, and the Effect of Sputtered (TiN) Coating on Their Corrosion Behavior

Analytical and Numerical Research on the Effect of Head Shape of Peening Medium on the Dimple Size, Plastic Region Depth and Residual Stress

A New Dominance Distribution Method to Select Materials with Higher Fatigue Resistance under Property Scatter and Load Uncertainty

Insights on Microstructure and Failure Characteristics of Resistance Spot Welds of Galvannealed Dual Phase Steel

Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer

Premium Partner

Marktübersichten