nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

15.03.2021 | ORIGINAL ARTICLE

Tool wear and machinability investigations in dry turning of Cu/Mo-SiC_p hybrid composites

verfasst von: Emine Şap, Usame Ali Usca, Munish Kumar Gupta, Mustafa Kuntoğlu

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Composites are a unique class of materials extensively used in many modern applications such as aerospace, automobile, and marine applications. However, the high strength and hardness, low thermal expansion, and other physical properties limit its application in machining sector. Therefore, the aim of this study is to investigate the effects of different machining parameters on surface roughness, tool wear, cutting temperature, and chip formation while turning Cu/Mo-SiC_p composites. The copper composites reinforced with Mo-SiC_p were fabricated with powder metallurgy route and depth of cut (a_p), feed rate (f_n), and cutting speed (V_c) were selected as the machining parameters. Influence of each parameter was noticed with 3D surface plots and scanning electron microscope observations were used for wear analysis. At the end of the analysis, it was determined that the most important parameter affecting surface roughness, tool wear, and cutting temperature was particle additive ratio. In addition, it was observed that chip types and wear types changed according to increasing reinforcement rates.

Vorheriger Artikel Formability and microstructure of TC4 titanium alloy hollow shafts formed by cross-wedge rolling with a mandrel

Nächster Artikel Mechanical and tribological properties of porous metallic CBN composites reinforced by graphene nanoparticles

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Li J, Laghari RA (2019) A review on machining and optimization of particle-reinforced metal matrix composites. Int J Adv Manuf Technol 100(9-12):2929–2943CrossRef

Selvakumar V, Muruganandam S, Senthilkumar N (2017) Evaluation of mechanical and tribological behavior of Al–4% Cu–x% SiC composites prepared through powder metallurgy technique. Trans Indian Inst Metals 70(5):1305–1315CrossRef

Kaczmar J, Granat K, Kurzawa A, Grodzka E (2014) Physical properties of copper based MMC strengthened with alumina. Arch Foundry Eng 14(2):85–90CrossRef

Laghari RA, Li J, Mia M (2020) Effects of turning parameters and parametric optimization of the cutting forces in machining SiCp/Al 45 wt% composite. Metals 10(6):840CrossRef

Mia M, Gupta MK, Singh G, Królczyk G, Pimenov DY (2018) An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions. J Clean Prod 187:1069–1081CrossRef

Gupta MK, Sood P, Sharma VS (2016) Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques. J Clean Prod 135:1276–1288CrossRef

Ismail SO, Sarfraz S, Niamat M, Mia M, Gupta MK, Pimenov DY, Shehab E (2020) Comprehensive study on tool wear during machining of fiber-reinforced polymeric composites. In: Machining and machinability of fiber reinforced polymer composites. Springer, pp 129–147

Uzun M, Munis MM, Usca ÜA (2018) Different ratios CrC particle-reinforced Cu matrix composite materials and investigation of wear performance. J Eng Res Appl 8(7):1–7

Sap E (2020) Microstructural and mechanical properties of Cu-based Co-Mo-reinforced composites produced by the powder metallurgy method. J Mater Eng Perform 29(12):8461–8472CrossRef

10.

Chen X, Bao R, Yi J, Fang D, Tao J, Li F (2020) Enhancing mechanical properties of pure copper-based materials with CrxOy nanoparticles and CNT hybrid reinforcement. J Mater Sci. https://doi.org/10.1007/s10853-020-05440-6

11.

Prosviryakov A (2015) SiC content effect on the properties of Cu–SiC composites produced by mechanical alloying. J Alloys Compd 632:707–710CrossRef

12.

Xiao J-K, Zhang W, Liu L-M, Zhang L, Zhang C (2017) Tribological behavior of copper-molybdenum disulfide composites. Wear 384:61–71CrossRef

13.

Islak S, Çalıgülü U, Hraam HRH, Özorak C, Koç V (2019) Electrical conductivity, microstructure and wear properties of Cu-Mo coatings. Res Eng Struct Mater 5(2)

14.

Hussain MZ, Khan S, Sarmah P (2020) Optimization of powder metallurgy processing parameters of Al2O3/Cu composite through Taguchi method with Grey relational analysis. J King Saud Univ Eng Sci 32(4):274–286. https://doi.org/10.1016/j.jksues.2019.01.003CrossRef

15.

Jin D, Jingjie Z, Liguo W (2018) Transformation of microstructure and mechanical properties in the machined surface of powder metallurgy superalloy. Rare Metal Mater Eng 47(8):2275–2282CrossRef

16.

Karthikeyan N, Krishnan BR, VembathuRajesh A, Vijayan V (2020) Experimental analysis of Al-Cu-Si metal matrix composite by powder-metallurgy process. Proceedings, Materials Today

17.

Kulkarni H, Dabhade VV (2019) Green machining of powder-metallurgy-steels (PMS): an overview. J Manuf Process 44:1–18CrossRef

18.

Moazami-Goudarzi M, Nemati A (2018) Tribological behavior of self lubricating Cu/MoS2 composites fabricated by powder metallurgy. Trans Nonferrous Metals Soc China 28(5):946–956CrossRef

19.

Khaloobagheri M, Janipour B, Askari N, Shafiee Kamal Abad E (2013) Characterisation of powder metallurgy Cu-ZrO 2 composites. Adv Prod Eng Manag 8(4)

20.

Uzun M, Usca UA (2018) Effect of Cr particulate reinforcements in different ratios on wear performance and mechanical properties of Cu matrix composites. Journal of the Brazilian Society of Mechanical Sciences. Engineering 40(4):197

21.

Abd-Elwahed M, Meselhy A (2020) Experimental investigation on the mechanical, structural and thermal properties of Cu–ZrO2 nanocomposites hybridized by graphene nanoplatelets. Ceram Int

22.

Vereschaka A, Grigoriev S, Tabakov V, Migranov M, Sitnikov N, Milovich F, Andreev N (2020) Influence of the nanostructure of Ti-TiN-(Ti, Al, Cr) N multilayer composite coating on tribological properties and cutting tool life. Tribol Int:106388

23.

Krishnan BR, Ramesh M (2020) Optimization of machining process parameters in CNC turning process of IS2062 E250 steel using coated carbide cutting tool. Mater Today: Proceedings 21:346–350

24.

Senthilkumar N, Ganapathy T, Tamizharasan T (2014) Optimisation of machining and geometrical parameters in turning process using Taguchi method. Aust J Mech Eng 12(2):233–246CrossRef

25.

Torres A, Puertas I, Luis C (2015) Surface roughness analysis on the dry turning of an Al-Cu alloy. Procedia Eng 132:537–544CrossRef

26.

Zaman HA, Sharif S, Kim D-W, Idris MH, Suhaimi MA, Tumurkhuyag Z (2017) Machinability of cobalt-based and cobalt chromium molybdenum alloys-a review. Procedia Manuf 11:563–570CrossRef

27.

Muthukrishnan N, Murugan M, Rao KP (2008) Machinability issues in turning of Al-SiC (10p) metal matrix composites. Int J Adv Manuf Technol 39(3-4):211–218CrossRef

28.

Szczotkarz N, Mrugalski R, Maruda RW, Królczyk GM, Legutko S, Leksycki K, Dębowski D, Pruncu CI (2020) Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication. Tribol Int:106813

29.

Gupta MK, Song Q, Liu Z, Singh R, Sarikaya M, Khanna N (2020) Tribological behavior of textured tools in sustainable turning of nickel based super alloy. Tribol Int:106775

30.

Selvakumar V, Muruganandam S, Tamizharasan T, Senthilkumar N (2016) Machinability evaluation of Al–4% Cu–7.5% SiC metal matrix composite by Taguchi–Grey relational analysis and NSGA-II. Sādhanā 41(10):1219–1234CrossRef

31.

Chundru VR, Koona R, Pujari SR (2019) Surface modification of Ti6Al4V alloy using EDMed electrode made with nano-and micron-sized TiC/Cu powder particles. Arab J Sci Eng 44(2):1425–1436CrossRef

32.

Senthilkumar N, Tamizharasan T (2014) Experimental investigation of cutting zone temperature and flank wear correlation in turning AISI 1045 steel with different tool geometries. Indian Journal of Engineering and Materials. Sciences 21(2):139–148

33.

Wagih A, Fathy A, Kabeel A (2018) Optimum milling parameters for production of highly uniform metal-matrix nanocomposites with improved mechanical properties. Adv Powder Technol 29(10):2527–2537CrossRef

34.

Panneerselvam T, Kandavel T, Kishore P (2019) Experimental investigation on cutting tool performance of newly synthesized P/M alloy steel under turning operation. Arab J Sci Eng 44(6):5801–5809CrossRef

35.

Prabhu S, Ambigai R, Vinayagam B (2019) Thermal and surface analysis of copper–CNT and copper–graphene-based composite using Taguchi–Grey relational analysis. Aust J Mech Eng:1–12

36.

Tamizharasan T, Senthilkumar N, Selvakumar V, Dinesh S (2019) Taguchi’s methodology of optimizing turning parameters over chip thickness ratio in machining P/M AMMC. SN. Appl Sci 1(2):160

37.

Yıldırım ÇV (2020) Investigation of hard turning performance of eco-friendly cooling strategies: cryogenic cooling and nanofluid based MQL. Tribol Int 144:106127CrossRef

38.

Agrawal C, Khanna N, Pruncu CI, Singla AK, Gupta MK (2020) Tool wear progression and its effects on energy consumption and surface roughness in cryogenic assisted turning of Ti-6Al-4V. Int J Adv Manuf Technol 111(5-6):1319–1331CrossRef

39.

Kumar MB, Sathiya P, Parameshwaran R (2020) Parameters optimization for end milling of Al7075–ZrO 2–C metal matrix composites using GRA and ANOVA. Trans Indian Inst Metals:1–16

40.

Nallusamy S, Narayanan MR, Logeshwaran J (2017) Synthesis and machining characterization of copper-multiwalled carbon nanotubes-graphene hybrid composite using SEM and ANOVA. In: Journal of Nano Research. Trans Tech Publ, pp 105-115

41.

Ozben T, Kilickap E, Çakır O (2008) Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC. J Mater Process Technol 198(1):220–225. https://doi.org/10.1016/j.jmatprotec.2007.06.082CrossRef

42.

Kannan A, Mohan R, Viswanathan R, Sivashankar N (2020) Experimental investigation on surface roughness, tool wear and cutting force in turning of hybrid (Al7075 + SiC + Gr) metal matrix composites. J Mater Res Technol 9(6):16529–16540. https://doi.org/10.1016/j.jmrt.2020.11.074CrossRef

43.

Balasubramanian K, Nataraj M, Duraisamy P (2019) Machinability analysis and application of response surface approach on CNC turning of LM6/SiCp composites. Mater Manuf Process 34(12):1389–1400. https://doi.org/10.1080/10426914.2019.1660787CrossRef

44.

Niknam SA, Kamalizadeh S, Asgari A, Balazinski M (2018) Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts. Int J Adv Manuf Technol 97(1-4):253–265. https://doi.org/10.1007/s00170-018-1926-9CrossRef

45.

Dureja J, Gupta V, Sharma VS, Dogra M, Bhatti MS (2016) A review of empirical modeling techniques to optimize machining parameters for hard turning applications. Proc Inst Mech Eng B J Eng Manuf 230(3):389–404. https://doi.org/10.1177/0954405414558731CrossRef

46.

Mia M, Gupta MK, Pruncu CI, Sen B, Khan AM, Jamil M, Faraz S, Asef F, Imran GMS, Rahman MA (2020) Six sigma optimization of multiple machining characteristics in hard turning under dry, flood, MQL and solid lubrication. Journal of Production Systems and Manufacturing. Science 1(1):57–68

47.

Kechagias JD, Aslani KE, Fountas NA, Vaxevanidis NM, Manolakos DE (2020) A comparative investigation of Taguchi and full factorial design for machinability prediction in turning of a titanium alloy. Measurement 151

48.

Gurbuz H, Gonulacar YE (2020) Optimization and evaluation of dry and minimum quantity lubricating methods on machinability of AISI 4140 using Taguchi design and ANOVA. P I Mech Eng C-J Mec

49.

Kuntoğlu M, Sağlam H (2019) Investigation of progressive tool wear for determining of optimized machining parameters in turning. Measurement 140:427–436CrossRef

50.

Salur E, Aslan A, Kuntoglu M, Gunes A, Sahin OS (2019) Experimental study and analysis of machinability characteristics of metal matrix composites during drilling. Compos Part B 166:401–413CrossRef

51.

Gill AS, Kumar S (2016) Surface roughness and microhardness evaluation for EDM with Cu–Mn powder metallurgy tool. Mater Manuf Process 31(4):514–521CrossRef

52.

Swain PK, Das Mohapatra K, Swain PK (2020) Investigations, analysis and performance comparison of uncoated CNMG 120408 TTR and coated 12040822 carbide tools during dry turning of Al-SiCp nano composites. Mater Today-Proc 26:444–459. https://doi.org/10.1016/j.matpr.2019.12.080CrossRef

53.

Butola R, Kanwar S, Tyagi L, Singari RM, Tyagi M (2020) Optimizing the machining variables in CNC turning of aluminum based hybrid metal matrix composites. Sn Appl Sci 2(8):1356. https://doi.org/10.1007/s42452-020-3155-8CrossRef

54.

Kawin N, Jagadeesh D, Saravanan G, Periasamy K (2020) Optimization of turning parameters in sugarcane bagasse ash reinforced with Al-Si10-Mg alloy composites by Taguchi method. Mater Today-Proc 21:474–476. https://doi.org/10.1016/j.matpr.2019.06.634CrossRef

55.

Celik YH, Turkan C (2020) Investigation of mechanical characteristics of GFRP composites produced from chopped glass fiber and application of taguchi methods to turning operations. Sn Appl Sci 2(5):849. https://doi.org/10.1007/s42452-020-2684-5CrossRef

56.

Laghari RA, Gupta MK, Li J (2020) Evolutionary algorithm for the prediction and optimization of SiCp/Al metal matrix composite machining. Journal of Production Systems and Manufacturing. Science 2(1):59–69

57.

Kuntoğlu M, Sağlam H (2020) Investigation of signal behaviors for sensor fusion with tool condition monitoring system in turning. measurement:108582

58.

Klinkova O, Rech J, Drapier S, Bergheau J-M (2011) Characterization of friction properties at the workmaterial/cutting tool interface during the machining of randomly structured carbon fibers reinforced polymer with carbide tools under dry conditions. Tribol Int 44(12):2050–2058CrossRef

59.

Groover MP (2019) Fundamentals of modern manufacturing: materials, processes and systems. 7e Enhanced eText with Abridged Print Companion. Wiley

60.

Ozel T, Hsu TK, Zeren E (2005) Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel. Int J Adv Manuf Technol 25(3-4):262–269. https://doi.org/10.1007/s00170-003-1878-5CrossRef

61.

Kuntoğlu M, Aslan A, Sağlam H, Pimenov DY, Giasin K, Mikolajczyk T (2020) Optimization and analysis of surface roughness, flank wear and 5 different sensorial data via tool condition monitoring system in turning of AISI 5140. sensors 20(16):4377. https://doi.org/10.3390/s20164377CrossRef

62.

Aslan A (2020) Optimization and analysis of process parameters for flank wear, cutting forces and vibration in turning of AISI 5140: a comprehensive study. Measurement:107959

63.

Rouhi M, Moazami-Goudarzi M, Ardestani M (2019) Comparison of effect of SiC and MoS2 on wear behavior of Al matrix composites. Trans Nonferrous Metals Soc China 29(6):1169–1183CrossRef

64.

Zhan YZ, Zhang GD (2003) The effect of interfacial modifying on the mechanical and wear properties of SiCP/Cu composites. Mater Lett 57(29):4583–4591. https://doi.org/10.1016/S0167-577x(03)00365-3CrossRef

65.

Razavykia A, Farahany S, Yusof NM (2015) Evaluation of cutting force and surface roughness in the dry turning of Al–Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach. Measurement 76:170–182CrossRef

66.

Marani M, Songmene V, Zeinali M, Kouam J, Zedan Y (2020) Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al–20 Mg 2 Si–2Cu metal matrix composite using additives. Neural Comput & Applic 32(12):8115–8126CrossRef

67.

Palanikumar K, Muniaraj A (2014) Experimental investigation and analysis of thrust force in drilling cast hybrid metal matrix (Al–15% SiC–4% graphite) composites. Measurement 53:240–250CrossRef

68.

Barzani MM, Farahany S, Songmene V (2017) Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth. Measurement 110:263–274CrossRef

69.

Kuntoğlu M, Aslan A, Pimenov DY, Giasin K, Mikolajczyk T, Sharma S (2020) Modeling of cutting parameters and tool geometry for multi-criteria optimization of surface roughness and vibration via response surface methodology in turning of AISI 5140 steel. Materials 13(19):4242CrossRef

70.

Seeman M, Ganesan G, Karthikeyan R, Velayudham A (2010) Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach. Int J Adv Manuf Technol 48(5-8):613–624CrossRef

71.

Kumar P, Chauhan SR, Pruncu CI, Gupta MK, Pimenov DY, Mia M, Gill HS (2019) Influence of different grades of CBN inserts on cutting force and surface roughness of AISI H13 die tool steel during hard turning operation. Materials 12(1):177CrossRef

72.

Mia M, Dey PR, Hossain MS, Arafat MT, Asaduzzaman M, Ullah MS, Zobaer ST (2018) Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition. Measurement 122:380–391CrossRef

73.

Kuntoğlu M, Aslan A, Pimenov DY, Usca ÜA, Salur E, Gupta MK, Mikolajczyk T, Giasin K, Kapłonek W, Sharma S (2020) A review of indirect tool condition monitoring systems and decision-making methods in turning: critical analysis and trends. Sensors 21(1):108CrossRef

74.

Davim JP (2012) Machining of metal matrix composites. Springer

75.

Iuliano L, Settineri L, Gatto A (1998) High-speed turning experiments on metal matrix composites. Compos A: Appl Sci Manuf 29(12):1501–1509CrossRef

76.

Niknam SA, Kamalizadeh S, Asgari A, Balazinski M (2018) Turning titanium metal matrix composites (Ti-MMCs) with carbide and CBN inserts. Int J Adv Manuf Technol 97(1-4):253–265CrossRef

77.

Sarikaya M, Gullu A (2015) Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25. J Clean Prod 91:347–357CrossRef

78.

Dasch J, Ang C, Wong C, Waldo R, Chester D, Cheng Y, Powell B, Weiner A, Konca E (2009) The effect of free-machining elements on dry machining of B319 aluminum alloy. J Mater Process Technol 209(10):4638–4644CrossRef

79.

Pugazhenthi A, Kanagaraj G, Dinaharan I, Selvam JDR (2018) Turning characteristics of in situ formed TiB2 ceramic particulate reinforced AA7075 aluminum matrix composites using polycrystalline diamond cutting tool. Measurement 121:39–46CrossRef

80.

Coromant S (1994) Modern metal cutting: a practical handbook. Sandvik Coromant,

81.

Sobiyi K, Sigalas I (2015) Chip formation characterization and Tem Investigation of Worn Pcbn Tool during hard turning. Mach Sci Technol 19(3):479–498CrossRef

82.

Bai W, Roy A, Sun R, Silberschmidt VV (2019) Enhanced machinability of SiC-reinforced metal-matrix composite with hybrid turning. J Mater Process Technol 268:149–161CrossRef

83.

Barzani MM, Sarhan AA, Farahany S, Ramesh S, Maher I (2015) Investigating the machinability of Al–Si–Cu cast alloy containing bismuth and antimony using coated carbide insert. Measurement 62:170–178CrossRef

Titel: Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites
verfasst von: Emine Şap
Usame Ali Usca
Munish Kumar Gupta
Mustafa Kuntoğlu
Publikationsdatum: 15.03.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-06889-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2021

Hydrodynamic action in slicing PV polysilicon with a novel fixed and free abrasive combined wire sawing

Demonstration and evaluation of a digital twin-based virtual factory

Progress on single-point incremental forming of polymers

Comparison of geometrical accuracy of active devices for 3D orthopaedic reconstructions

Fabrication of silver microstructures via electrohydrodynamic inkjet printing as customizable X-ray marker in bio-structure for biomedical diagnostic imaging

Precise seam tracking in robotic welding by an improved image processing approach

Premium Partner

Marktübersichten