nach oben

Journal of Materials Engineering and Performance

Erschienen in:

31.05.2022 | Technical Article

A Hybrid Approximation to Wear Analysis in Electroless Ni-B Coatings: Conformity of Experimental and Finite Element Methods

verfasst von: Erhan Duru, M. Ömer İbiş, Yaşar Kahraman, Hatem Akbulut, Mehmet Uysal, Serdar Aslan

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the presented study, the wear behavior of nickel-boron (Ni-B) coatings produced by electroless plating was investigated experimentally and by the finite element method (FEM). After the morphological, chemical, and mechanical characterization of Ni-B coatings deposited on the steel substrate in an alkaline bath, the wear tests of the coating were performed under 2N, 4N, and 6N loads, at room temperature, by the ball-on-disk technique. The wear rates under different loads were 5.089, 4.750, and 4,375 mm³/Nm by experimental study, while they were calculated as 5.878, 5.365, and 5.023 mm³/Nm by FEM analysis, respectively. These results revealed that the wear rate values calculated by experimental and numerical analysis methods were compatible up to 89%. The wear rate in Ni-B coatings can be calculated precisely by FEM analysis even under different wear conditions. Furthermore, considering the elimination of the experimental work, this new approach is time and cost-effective.

Vorheriger Artikel Analytical and Numerical Research on the Effect of Head Shape of Peening Medium on the Dimple Size, Plastic Region Depth and Residual Stress

Nächster Artikel Effect of Shot Peening on the Ballistic Performance of Friction Stir Welded Magnesium Alloy (AZ31B) Joints

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

L. Shan, Y. Li, J. Miao, J. Wu, K. Zhai, and X. Wang, Improvement of Anti-Corrosive and Anti-Oxidative Properties of Electroless Ni-P Coating, Surf. Eng., 2019, 35, p 833–840. https://doi.org/10.1080/02670844.2017.1399546CrossRef

L. Bonin, V. Vitry, and F. Delaunois, Surface & Coatings Technology The Tin Stabilization Effect on the Microstructure, Corrosion and Wear Resistance of Electroless NiB Coatings, Surf. Coat. Technol., 2019, 357, p 353–363. https://doi.org/10.1016/j.surfcoat.2018.10.011CrossRef

F. Madah, C. Dehghanian, and A.A. Amadeh, Investigations on the Wear Mechanisms of Electroless Ni–B Coating During Dry Sliding and Endurance Life of the Worn Surfaces, Surf. Coatings Technol., 2015, 282, p 6–15. https://doi.org/10.1016/j.surfcoat.2015.09.003CrossRef

V. Vitry and F. Delaunois, Nanostructured Electroless Nickel-Boron Coatings for Wear Resistance, Elsevier Ltd, 2014 https://doi.org/10.1016/B978-0-85709-211-3.00007-8CrossRef

D. Pritima, B. Stalin, J. Vairamuthu, P. Mallesham, M. Srinivasa Rao, and S. Marichamy, Analysis of Parameters on Bend Force in Nickel-Coated Mild Steel Sheets Through Contour Plot, Lect. Notes Mech. Eng., 2021 https://doi.org/10.1007/978-981-15-4739-3_55CrossRef

D. Pritima, P. Padmanabhan, S. Marichamy, C. Sivakandhan, B. Stalin, and V. Dhinakaran, Material Characterization and Parametric Effect on Nickel-Coated Mild Steel Sheets by Electroplating Process, Lect. Notes Mech. Eng., 2021, 23, p 465–471. https://doi.org/10.1007/978-981-15-4739-3_40CrossRef

M. Anik, E. Körpe, and Ş Esin, Effect of Coating Bath Composition on the Properties of Electroless Nickel – Boron Films, Surf. Coat. Technol., 2008, 202(9), p 1718–1727. https://doi.org/10.1016/j.surfcoat.2007.07.031CrossRef

B.S.P. Perumal, K. Ramanathan, L. Ganesan, B. Subramanian, and V. Ganesh, Investigation of TiN Coating Uniformity and its Corrosion Behaviour Using Image Process, J. Phys. Energy, 2020 https://doi.org/10.1088/2053-1591/aafae9CrossRef

C.R. Kannan, S. Manivannan, B. Stalin, and C. Kailasanathan, Metallographic Characterization of SiC-Ni-Ti Layer Reinforced on Austenitic Stainless Steel (AISI 316L) by Two-step Laser Fabrication, SILICON, 2021 https://doi.org/10.1007/s12633-021-01305-yCrossRef

10.

F. Delaunois, J. Petitjean, P. Lienard, and M. Jacob-Duliere, Autocatalytic Electroless Nickel-Boron Plating on Light Alloys, Surf. Coatings Technol., 2000, 124, p 201–209. https://doi.org/10.1016/S0257-8972(99)00621-0CrossRef

11.

J. Sudagar, J. Lian, and W. Sha, Electroless Nickel, Alloy, Composite and Nano Coatings–A Critical Review, J. Alloys Compd., 2013, 571, p 183–204. https://doi.org/10.1016/j.jallcom.2013.03.107CrossRef

12.

D. Baudrand, Electroless Nickel Plating On Zinc Die Castings, Plat. Surf. Finish., 1987, 74(7), p 24–26.

13.

P. Sahoo and S.K. Das, Tribology of Electroless Nickel Coatings – A Review, Mater. Des., 2011, 32, p 1760–1775. https://doi.org/10.1016/j.matdes.2010.11.013CrossRef

14.

R.C. Agarwala and V. Agarwala, Electroless alloy / composite coatings: A review, Sadhana, 2003, 28, p 475–493.CrossRef

15.

T.S.N.S. Narayanan, K. Krishnaveni and S.K. Seshadri, Electroless Ni–P/Ni–B Duplex Coatings: Preparation and Evaluation of Microhardness, Wear and Corrosion Resistance, Mater. Chem. Phys., 2003, 82, p 771–779. https://doi.org/10.1016/S0254-0584(03)00390-0CrossRef

16.

J.F. Luo, Y.J. Liu, and E.J. Berger, Interfacial Stress Analysis for Multi-Coating Systems Using an Advanced Boundary Element Method, Comput. Mech., 2000, 24(6), p 448–455.CrossRef

17.

P. Po, Simulating Sliding Wear with Finite Element Method, Tribol. int., 1999, 32, p 71–81.CrossRef

18.

Y. Sun, A. Bloyce, and T. Bell, Finite Element Analysis of Plastic Deformation of Various TiN Coating / Substrate Systems Under Normal Contact with a Rigid Sphere, Thin Sol. Film., 1995, 271, p 122–131.CrossRef

19.

M. Arjmandi and M. Ramezani, Tribology International Finite Element Modelling of Sliding Wear in Three-Dimensional Textile Hydrogel Composites, Tribiology Int., 2019, 133, p 88–100. https://doi.org/10.1016/j.triboint.2019.01.011CrossRef

20.

O. Vestrum, M. Langseth, and B. Tore, Finite Element Modeling of Porous Polymer Pipeline Coating Using X-ray Micro Computed Tomography, Compos. Part B: Eng., 2019, 172, p 406–415. https://doi.org/10.1016/j.compositesb.2019.04.028CrossRef

21.

A. Khoddami, D. Salimi-majd, and B. Mohammadi, Surface & Coatings Technology Finite Element and Experimental Investigation of Multiple Solid Particle Erosion on Ti-6Al-4V Titanium Alloy Coated by Multilayer Wear-Resistant Coating, Surf. Coat. Technol., 2019, 372, p 173–189. https://doi.org/10.1016/j.surfcoat.2019.05.042CrossRef

22.

I. Ud, S. Panier, P. Hao, G. Franz, J. Bijwe, and L. Hui, Tribology International Finite element Modeling of Indentation and Adhesive Wear in Sliding of Carbon Fiber Reinforced Thermoplastic Polymer Against Metallic Counterpart, Tribiology Int., 2019, 135, p 200–212. https://doi.org/10.1016/j.triboint.2019.03.010CrossRef

23.

H. Kim, K. Seo, and D. Kim, Investigation of Mechanical Behavior of Single- and Multi-Layer Graphene by using Molecular Dynamics, SIMULATION, 2016, 17, p 1693–1701. https://doi.org/10.1007/s12541-016-0196-4CrossRef

24.

A. Tahir, G. Li, M. Liu, G. Yang, C. Li, Y. Wang, and C. Li, Journal of Materials Science & Technology Improving WC-Co Coating Adhesive Strength on Rough Substrate: Finite Element Modeling and Experiment, J. Mater. Sci. Technol., 2020, 37, p 1–8. https://doi.org/10.1016/j.jmst.2019.07.033CrossRef

25.

A. Albers and S. Reichert, On the Influence of Surface Roughness on the Wear Behavior in the Running-In Phase in Mixed-Lubricated Contacts with the Finite Element Method, Wear, 2017, 376–377, p 1185–1193. https://doi.org/10.1016/j.wear.2017.01.035CrossRef

26.

M. Koopaie, S. Kolahdouz, and E.M. Kolahdouz, Comparison of Wear and Temperature of Zirconia and Tungsten Carbide Tools in Drilling Bone: In Vitro and Finite, Br. J. Oral Maxillofac. Surg., 2019, 57, p 557–565. https://doi.org/10.1016/j.bjoms.2019.05.002CrossRef

27.

M. Mohammadi, E. Poursaeidi, and K. Torkashvand, Finite Element Analysis of the Effect of Thermal Cycles and Ageing on the Interface Delamination of Plasma Sprayed Thermal Barrier Coatings, Surf. Coatings Technol., 2019, 375, p 243–255. https://doi.org/10.1016/j.surfcoat.2019.06.093CrossRef

28.

S. Yazdani and F. Mahboubi, Comparison Between Microstructure, Wear Behavior, and Corrosion Resistance of Plasma - Nitrided and Vacuum Heat - Treated Electroless Ni – B Coating, J. Bio- Tribo-Corros., 2019, 5(3), p 1–11. https://doi.org/10.1007/s40735-019-0264-2CrossRef

29.

K. Krishnaveni, T.S.N. Sankara Narayanan, and S.K. Seshadri, Electroless Ni-B Coatings: Preparation and Evaluation of Hardness and Wear Resistance, Surf. Coatings Technol., 2005, 190(1), p 115–121. https://doi.org/10.1016/j.surfcoat.2004.01.038CrossRef

30.

K.N. Srinivasan, R. Meenakshi, A. Santhi, P.R. Thangavelu, S. John, R. Meenakshi, A. Santhi, P.R. Thangavelu, S. John, K.N. Srinivasan, R. Meenakshi, A. Santhi, P.R. Thangavelu, and S. John, Studies on Development of Electroless Ni – B Bath for Corrosion Resistance and Wear Resistance Applications Studies on Development of Electroless Ni – B Bath for Corrosion Resistance and Wear Resistance Applications, Surf. Eng., 2013, 26(3), p 153–158. https://doi.org/10.1179/174329409X409468CrossRef

31.

B. Oraon, G. Majumdar, and B. Ghosh, Improving Hardness of Electroless Ni–B Coatings Using Optimized Deposition Conditions and Annealing, Mater. Des., 2008, 29, p 1412–1418. https://doi.org/10.1016/j.matdes.2007.09.005CrossRef

32.

Z.A. Hamid, H.B. Hassan, and A.M. Attyia, Influence of Deposition Temperature and Heat Treatment on the Performance of Electroless Ni–B Films, Surf. Coatings Technol., 2010, 205, p 2348–2354. https://doi.org/10.1016/j.surfcoat.2010.09.025CrossRef

33.

M. Vijayanand and R. Elansezhian, Effect of different pretreatments and heat treatment on wear properties of electroless Ni-B Coatings on 7075–T6 Aluminum Alloy, Proced. Eng., Elsevier Ltd, 2014, 97, p 1707–1717. https://doi.org/10.1016/j.proeng.2014.12.322CrossRef

34.

D. Gültekin, E. Duru, and H. Akbulut, Improved Wear Behaviors of Lead-Free Electroless Ni[sbnd]B and Ni-B/CeO2 Composite Coatings, Surf. Coatings Technol., 2021, 422, p 127525. https://doi.org/10.1016/j.surfcoat.2021.127525CrossRef

35.

S. Sürdem, C. Eseroǧlu, and R. Çitak, A Parametric Study on the Relationship Between NaBH4 and Tribological Properties in the Nickel-Boron Electroless Depositions, Mater. Res. Express., 2019, 6, p 125085. https://doi.org/10.1088/2053-1591/ab5bebCrossRef

36.

K. Krishnaveni, T.S.N.S. Narayanan, and S.K. Seshadri, Corrosion Resistance of Electrodeposited Ni–B and Ni–B–Si3N4 Composite Coatings, J. Alloys Compd., 2009, 480, p 765–770. https://doi.org/10.1016/j.jallcom.2009.02.053CrossRef

37.

F. Delaunois and P. Lienard, Heat Treatments for Electroless Nickel–Boron Plating on Aluminium Alloys, Surf. Coatings Technol., 2002, 160, p 239–248. https://doi.org/10.1016/S0257-8972(02)00415-2CrossRef

38.

V. Vitry, F. Delaunois, and C. Dumortier, Mechanical Properties and Scratch Test Resistance of Nickel-Boron Coated Aluminium Alloy after Heat Treatments, Surf. Coatings Technol., 2008, 202, p 3316–3324. https://doi.org/10.1016/j.surfcoat.2007.12.001CrossRef

39.

T.S.N. Sankara Narayanan and S.K. Seshadri, Formation and Characterization of Borohydride Reduced Electroless Nickel Deposits, J. Alloys Compd., 2004, 365(1–2), p 197–205. https://doi.org/10.1016/S0925-8388(03)00680-7CrossRef

40.

L. Guerra, F. Echeverria, and E. Correa, Effect of pH on Dimethylamine Borane Reduced Electroless Nickel Deposits on AISI / SAE 1045 Steel Surface, Met. Mater. Int., 2020, 26(6), p 773–782. https://doi.org/10.1007/s12540-019-00362-8CrossRef

41.

W. Zhang, B. Li, and C. Ji, Synthesis and Characterization of Ni-W/TiN Nanocomposite Coating with Enhanced Wear and Corrosion Resistance Deposited by Pulse Electrodeposition, Ceram. Int., 2019, 45, p 14015–14028. https://doi.org/10.1016/j.ceramint.2019.04.101CrossRef

42.

M. Narayanasamy, B. Kirubasankar, A. Joseph, C. Yan, and S. Angaiah, Influence of Pulse Reverse Current on Mechanical and Corrosion Resistance Properties of Ni-MoSe2 Nanocomposite Coatings, Appl. Surf. Sci., 2019, 493, p 225–230. https://doi.org/10.1016/j.apsusc.2019.06.239CrossRef

43.

F. Doğan, M. Uysal, H. Algül, E. Duru, H. Akbulut, and S. Aslan, Optimization of Pulsed Electro Co-Deposition for Ni-B-TiN Composites and the Variation of Tribological and Corrosion Behaviors, Surf. Coatings Technol., 2020, 400, 126209. https://doi.org/10.1016/j.surfcoat.2020.126209CrossRef

44.

C.A. León-Patiño, J. García-Guerra, and E.A. Aguilar-Reyes, Tribological Characterization of Heat-Treated Ni-P and Ni-P-Al 2 O 3 Composite Coatings by Reciprocating Sliding Tests, Wear, 2019, 426, p 330–340. https://doi.org/10.1016/j.wear.2019.02.015CrossRef

45.

M.J.S. Lima, F.E.S. Silva, M.V.M. Souto, K.F.G. Araújo, R.A.C. Menezes, M. Filgueira, C.P. Souza, and U.U. Gomes, Effect of Synthesis Parameters on the Crystallite Size of WC-Ni Composite Powders Obtained by Gas-Solid Reaction, Ceram. Int., 2021, 47, p 23480–23487. https://doi.org/10.1016/j.ceramint.2021.05.064CrossRef

46.

F. Doğan, M. Uysal, and E. Duru, Pulsed Electrodeposition of Ni-B/TiN Composites: Effect of Current Density on the Structure, Mechanical, Tribological, and Corrosion Properties, J. Asian Ceram. Soc., 2020, 8, p 1271–1284. https://doi.org/10.1080/21870764.2020.1840704CrossRef

47.

H. Hu, Y. Guo, J. Yan, J. Qiu, and Y. Wang, Dry sliding Wear Behavior of MoSi2-Mo5Si3-Mo5SiB2 Composite at different Temperatures and Loads, Wear, 2019, 428–429, p 237–245. https://doi.org/10.1016/j.wear.2019.03.018CrossRef

48.

S. Arulvel, A. Elayaperumal, and M.S. Jagatheeshwaran, Controlling Adhesive Wear Failure of Nickel-Phosphorus Coating at High Load Condition using Crab Shell Particle as Reinforcement, Eng. Fail. Anal., 2018, 90, p 310–323. https://doi.org/10.1016/j.engfailanal.2018.04.004CrossRef

49.

F. Doğan, E. Duru, M. Uysal, H. Akbulut, and S. Aslan, Tribology Study of Pulse Electrodeposited Ni-B-SWCNT Composite Coating, Jom., 2022, 74, p 574–583. https://doi.org/10.1007/s11837-021-05070-6CrossRef

50.

A. Mukhopadhyay, T.K. Barman, and P. Sahoo, Effect of Heat Treatment on the Characteristics of Electroless Ni-B, Ni-B-W and Ni-B-Mo Coatings, Mater. Today Proc., 2018, 5, p 3306–3315. https://doi.org/10.1016/j.matpr.2017.11.573CrossRef

51.

H. Liu, Y.Y. Lv, Z. Liu, H. Liu, and G.E. Thompson, Dry Sliding Wear Behaviour and Structural Characteristics of Laser-Annealed Electroless Ni–P/Ni–Mo–P Duplex Coatings, Tribol. Int., 2016, 103, p 343–351. https://doi.org/10.1016/j.triboint.2016.07.014CrossRef

52.

H. Algul, M. Uysal, and A. Alp, A Comparative Study on Morphological, Mechanical and Tribological Properties of Electroless NiP, NiB and NiBP Coatings, Appl. Surf. Sci. Adv., 2021, 4, p 100089. https://doi.org/10.1016/j.apsadv.2021.100089CrossRef

53.

F. Madah, A.A. Amadeh, and C. Dehghanian, Investigation on the Phase Transformation of Electroless Ni–B Coating After Dry Sliding Against Alumina Ball, J. Alloys Compd., 2016, 658, p 272–279. https://doi.org/10.1016/j.jallcom.2015.10.156CrossRef

54.

F. Doğan, E. Duru, M. Uysal, H. Akbulut, and S. Aslan, Structural, Mechanical, and Tribological Studies of Ni-B-TiN Composite Coating: Effect of SDS Concentration, J. Adhes. Sci. Technol., 2022 https://doi.org/10.1080/01694243.2022.2060784CrossRef

Titel: A Hybrid Approximation to Wear Analysis in Electroless Ni-B Coatings: Conformity of Experimental and Finite Element Methods
verfasst von: Erhan Duru
M. Ömer İbiş
Yaşar Kahraman
Hatem Akbulut
Mehmet Uysal
Serdar Aslan
Publikationsdatum: 31.05.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07035-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2022

Dynamic Deformation of Low-Alloyed Transformation-Induced Plasticity-Aided Steel from Low to High Strain Rates

Studies on Microstructure Evolution, Mechanical, and Corrosion Behaviors of Cryorolled 316L Steel

Corrosion Behaviors of S355 Steel under Simulated Tropical Marine Atmosphere Conditions

As-Cast High Entropy Shape Memory Alloys of (TiHfX)50(NiCu)50 with Large Recoverable Strain and Good Mechanical Properties

Corrosion and Metal Release Investigation of a Porous Biomedical Vitallium Alloy Coated with 58S Sol-Gel Bioactive Glass

Hot Workability and Microstructural Evolution of Powder Metallurgy Ti-22Al-24Nb-0.5Mo Alloy during Hot Compression

Premium Partner

Marktübersichten