nach oben

Erschienen in:

16.03.2021 | Original Research

Comparative assessment of cellulose nanofibers and calcium alginate beads for continuous Cu(II) adsorption in packed columns: the influence of water and surface hydrophobicity

verfasst von: Núria Fiol, Quim Tarrés, Matías G. Vásquez, Miguel A. Pereira, Regis Teixeira Mendonça, Pere Mutjé, Marc Delgado-Aguilar

Erschienen in: Cellulose | Ausgabe 7/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

While water is indispensable for life, around 785 million people do not have access to basic drinking water. Heavy metals present high toxicity at low concentrations, are non-biodegradable and easy to accumulate in living organisms such as human body, causing serious diseases or even death. Copper is usually found at high concentrations in wastewater due to its extensive use in several industrial applications, and effective copper removal systems must be developed. The present work aims at developing effective TEMPO-oxidized cellulose nanofibers (CNFs) based systems able to adsorb Cu(II) in adsorption columns. CNFs were partially modified with alkyl ketene dimer (AKD) to avoid regelation during flowing through the column, as it was experienced for those unmodified. Calcium alginate beads were used as reference, as there is extensive literature on their use as Cu(II) adsorbent. Breakthrough curves were obtained and modelled according to Bohart-Adams, Yoon-Nelson and Thomas models, concluding that the adsorption rate of CNFs was significantly higher than in the case of calcium alginate beads due to the negative effects of highly charged water and diffusion through the beads. In addition, CNF-based adsorption systems demonstrated to be effective, especially at the beginning of the tests, as they exhibited a well-defined sigmoidal behavior, which was not observed in the case of the calcium alginate beads. On the contrary, the adsorption capacity was higher in the case of the alginate-based system, mainly due to the higher carboxyl content and ion exchange capacity. Overall, the present work shows the feasibility of using a high-performance bio-based and nanostructured cellulose material as Cu(II) adsorbent by means of a fast, simple, and effective chemical modification based on surface esterification.

Vorheriger Artikel Micro fibrillated cellulose reinforced bio-based rigid high-density polyurethane foams

Nächster Artikel Wettable copper hydroxide cotton fabric for oil-water separation made by surface micro-dissolution

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Alinnor IJ (2007) Adsorption of heavy metal ions from aqueous solution by fly ash. Fuel 86:853–857. https://doi.org/10.1016/j.fuel.2006.08.019CrossRef

Al-Saydeh SA, El-Naas MH, Zaidi SJ (2017) Copper removal from industrial wastewater: a comprehensive review. J Ind Eng Chem 56:35–44. https://doi.org/10.1016/j.jiec.2017.07.026CrossRef

Alves-Gurgel LV, Karnitz-Junior O, de Freitas-Gil RP, Gil LF (2008) Adsorption of Cu(II), Cd(II), and Pb(II) from aqueous single metal solutions by cellulose and mercerized cellulose chemically modified with succinic anhydride. Bioresour Technol 99:3077–3083. https://doi.org/10.1016/j.biortech.2007.05.072CrossRef

An B, Lee H, Lee S et al (2015) Determining the selectivity of divalent metal cations for the carboxyl group of alginate hydrogel beads during competitive sorption. J Hazard Mater 298:11–18. https://doi.org/10.1016/j.jhazmat.2015.05.005CrossRefPubMed

Anastopoulos I, Kyzas GZ (2015) Progress in batch biosorption of heavy metals onto algae. J Mol Liq 209:77–86. https://doi.org/10.1016/j.molliq.2015.05.023CrossRef

Bartram J, Callan P, Hashizume H, et al (2004) Copper in Drinking-water. Background document for the development of WHO Guidelines for Drinking-water Quality.

Batmaz R, Mohammed N, Zaman M et al (2014) Cellulose nanocrystals as promising adsorbents for the removal of cationic dyes. Cellulose 21:1655–1665. https://doi.org/10.1007/s10570-014-0168-8CrossRef

Benkaddour A, Journoux-Lapp C, Jradi K et al (2014) Study of the hydrophobization of TEMPO-oxidized cellulose gel through two routes: Amidation and esterification process. J Mater Sci 49:2832–2843. https://doi.org/10.1007/s10853-013-7989-yCrossRef

Besbes I, Vilar MR, Boufi S (2011) Nanofibrillated cellulose from Alfa, Eucalyptus and Pine fibres: Preparation, characteristics and reinforcing potential. Carbohydr Polym 86:1198–1206. https://doi.org/10.1016/j.carbpol.2011.06.015CrossRef

Bildik AE, Hubbe MA, Gurboy KB (2016) Alkyl ketene dimer (AKD) sizing of paper under simplified treatment conditions. Tappi J 15:545–552CrossRef

Bohart GS, Adams EQ (1920) Some aspects of the behavior of charcoal with respect to chlorine. J Am Chem Soc 42:523–544CrossRef

Brodin FW, Theliander H (2012) Absorbent materials based on kraft pulp: preparation and material characterization. BioResources 7:1666–1686. https://doi.org/10.15376/biores.7.2.1666-1683CrossRef

Chen J, Tendeyong F, Yiacoumi S (1997) Equilibrium and kinetic studies of copper uptake by calcium alginate. Environ Sci Technol 31:1433–1439CrossRef

Chen JP, Hong L, Wu S, Wang L (2002) Elucidation of interactions between metal ions and Ca alginate-based ion-exchange resin by spectroscopic analysis and modeling simulation. Langmuir 18:9413–9421. https://doi.org/10.1021/la026060vCrossRef

Chu KH (2020) Breakthrough curve analysis by simplistic models of fixed bed adsorption: In defense of the century-old Bohart-Adams model. Chem Eng J 380:122513. https://doi.org/10.1016/j.cej.2019.122513CrossRef

Crini G (2005) Recent developments in polysaccharide-based materials used as adsorbents in wastewater treatment. Prog Polym Sci 30:38–70. https://doi.org/10.1016/j.progpolymsci.2004.11.002CrossRef

De Nooy AE, Besemer AC, van Bekkum H (1994) Highly selective TEMPO-mediated oxidation of primary alcohol groups in polysaccharides. Recl Trav Chim 113:165–166CrossRef

Dil EA, Ghaedi M, Asfaram A (2017) The performance of nanorods material as adsorbent for removal of azo dyes and heavy metal ions: application of ultrasound wave, optimization and modeling. Ultrason Sonochem 34:792–802. https://doi.org/10.1016/j.ultsonch.2016.07.015CrossRefPubMed

Eren E (2008) Removal of copper ions by modified Unye clay, Turkey. J Hazard Mater 159:235–244. https://doi.org/10.1016/j.jhazmat.2008.02.035CrossRefPubMed

Escudero-Oñate C, Fiol N, Poch J (2017) Valorisation of lignocellulosic biomass wastes for the removal of metal ions from aqueous streams: a review. In: Tumuluru JS (ed) Biomass volume estimation and valorization for energy. Intech, pp 381–407

Espinosa E, Tarrés Q, Delgado-Aguilar M et al (2016) Suitability of wheat straw semichemical pulp for the fabrication of lignocellulosic nanofibres and their application to papermaking slurries. Cellulose 23:837–852. https://doi.org/10.1007/s10570-015-0807-8CrossRef

Fiol N, Poch J, Villaescusa I (2004) Chromium (VI) uptake by grape stalks wastes encapsulated in calcium alginate beads: equilibrium and kinetics studies. Chem Speciat Bioavailab 16:25–33. https://doi.org/10.3184/095422904782775153CrossRef

Fiol N, Escudero C, Poch J, Villaescusa I (2006) Preliminary studies on Cr(VI) removal from aqueous solution using grape stalk wastes encapsulated in calcium alginate beads in a packed bed up-flow column. React Funct Polym 66:795–807. https://doi.org/10.1016/j.reactfunctpolym.2005.11.006CrossRef

Fiol N, Vásquez MG, Pereira M et al (2019) TEMPO-oxidized cellulose nanofibers as potential Cu(II) adsorbent for wastewater treatment. Cellulose. https://doi.org/10.1007/s10570-018-2106-7CrossRef

Fujisawa S, Okita Y, Fukuzumi H et al (2011) Preparation and characterization of TEMPO-oxidized cellulose nanofibril films with free carboxyl groups. Carbohydr Polym 84:579–583. https://doi.org/10.1016/j.carbpol.2010.12.029CrossRef

Future Markets Inc. (2020) The global market for cellulose nanofibers.

Gisela A, Alessandro C (2010) Turning polysaccharides into hydrophobic materials: a critical review. Part 1. Cellulose. https://doi.org/10.1007/s10570-010-9434-6CrossRef

Gisela A, Qi C (2014) Topochemical acetylation of cellulose nanopaper structures for biocomposites: mechanisms for reduced water vapour sorption. Cellulose 21:2773–2787. https://doi.org/10.1007/s10570-014-0334-zCrossRef

Godwin PM, Pan Y, Xiao H, Afzal MT (2019) Progress in preparation and application of modified biochar for improving heavy metal ion removal from wastewater. J Bioresour Bioprod 4:31–42. https://doi.org/10.21967/jbb.v4i1.180CrossRef

Gong JL, Wang XY, Zeng GM et al (2012) Copper (II) removal by pectin-iron oxide magnetic nanocomposite adsorbent. Chem Eng J 185–186:100–107. https://doi.org/10.1016/j.cej.2012.01.050CrossRef

Gu F, Wang W, Cai Z et al (2018) Water retention value for characterizing fibrillation degree of cellulosic fibers at micro and nanometer scales. Cellulose 25:2861–2871. https://doi.org/10.1007/s10570-018-1765-8CrossRef

Henriksson M, Henriksson G, Berglund LA, Lindström T (2007) An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibers. Eur Polym J 43:3434–3441. https://doi.org/10.1016/j.eurpolymj.2007.05.038CrossRef

Ho TTT, Zimmermann T, Hauert R, Caseri W (2011) Preparation and characterization of cationic nanofibrillated cellulose from etherification and high-shear disintegration processes. Cellulose 18:1391–1406. https://doi.org/10.1007/s10570-011-9591-2CrossRef

Hokkanen S, Repo E, Sillanpää M (2013) Removal of heavy metals from aqueous solutions by succinic anhydride modified mercerized nanocellulose. Chem Eng J 223:40–47. https://doi.org/10.1016/j.cej.2013.02.054CrossRef

Hokkanen S, Repo E, Suopajärvi T et al (2014) Adsorption of Ni(II), Cu(II) and Cd(II) from aqueous solutions by amino modified nanostructured microfibrillated cellulose. Cellulose 21:1471–1487. https://doi.org/10.1007/s10570-014-0240-4CrossRef

Hokkanen S, Bhatnagar A, Sillanpää M (2016) A review on modification methods to cellulose-based adsorbents to improve adsorption capacity. Water Res 91:156–173. https://doi.org/10.1016/j.watres.2016.01.008CrossRefPubMed

Hubbe MA (2007) Paper’s resistance to wetting—a review of internal sizing chemicals and their effects. BioResources 2:106–145. https://doi.org/10.15376/biores.2.1.106-145CrossRef

Ibáez JP, Umetsu Y (2002) Potential of protonated alginate beads for heavy metals uptake. Hydrometallurgy 64:89–99. https://doi.org/10.1016/S0304-386X(02)00012-9CrossRef

Isogai A, Kato Y (1998) Preparation of polyuronic acid from cellulose by TEMPO-mediated oxidation. Cellulose 5:153–164CrossRef

Isogai A, Kitoaka C, Onabe F (1997) Effects of carboxyl groups in pulp on retention of alkylketene dimer. J Pulp Pap Sci 23:J215–J219

Isogai A, Saito T, Fukuzumi H (2011b) TEMPO-oxidized cellulose nanofiber. Nanoscale 3:71–85. https://doi.org/10.1039/c0nr00583eCrossRefPubMed

Isogai A, Saito T, Fukuzumi H (2011a) TEMPO-oxidized cellulose nanofibers. Nanoscale 3:71–85. https://doi.org/10.1039/c0nr00583eCrossRefPubMed

Jan AT, Azam M, Siddiqui K et al (2015) Heavy metals and human health: Mechanistic insight into toxicity and counter defense system of antioxidants. Int J Mol Sci 16:29592–29630. https://doi.org/10.3390/ijms161226183CrossRefPubMedPubMedCentral

Jodra Y, Mijangos F (2001) Ion exchange selectivities of calcium alginate gels for heavy metals. Water Sci Technol 43:237–244. https://doi.org/10.2166/wst.2001.0095CrossRefPubMed

Klemm D, Cranston ED, Fischer D et al (2018) Nanocellulose as a natural source for groundbreaking applications in materials science: Today’s state. Mater Today 21:720–748. https://doi.org/10.1016/j.mattod.2018.02.001CrossRef

Lagoa R, Rodrigues JR (2009) Kinetic analysis of metal uptake by dry and gel alginate particles. Biochem Eng J 46:320–326. https://doi.org/10.1016/j.bej.2009.06.007CrossRef

Lee SM, Davis AP (2001) Removal of Cu(II) and Cd(II) from aqueous solution by seafood processing waste sludge. Water Res 35:534–540. https://doi.org/10.1016/S0043-1354(00)00284-0CrossRefPubMed

Li B, Pan Y, Zhang Q et al (2019) Porous cellulose beads reconstituted from ionic liquid for adsorption of heavy metal ions from aqueous solutions. Cellulose 26:9163–9178. https://doi.org/10.1007/s10570-019-02687-4CrossRef

Li T, Chen C, Brozena AH et al (2021) Developing fibrillated cellulose as a sustainable technological material. Nature 590:47–56. https://doi.org/10.1038/s41586-020-03167-7CrossRefPubMed

Lin Z, Li J, Luan Y, Dai W (2020) Application of algae for heavy metal adsorption: A 20-year meta-analysis. Ecotoxicol Environ Saf 190:110089. https://doi.org/10.1016/j.ecoenv.2019.110089CrossRefPubMed

Lindström T, Larsson PT (2008) Alkyl ketene dimer (AKD) sizing: a review. Nord Pulp Pap Res J 23:202–209CrossRef

Liu L, Huang L, Huang R et al (2021) Immobilization of heavy metals in biochar derived from co-pyrolysis of sewage sludge and calcium sulfate. J Hazard Mater 403:123648. https://doi.org/10.1016/j.jhazmat.2020.123648CrossRefPubMed

Lizundia E, Delgado-Aguilar M, Mutjé P et al (2016) Cu-coated cellulose nanopaper for green and low-cost electronics. Cellulose 23:1997–2010. https://doi.org/10.1007/s10570-016-0920-3CrossRef

Lombardo S, Thielemans W (2019) Thermodynamics of adsorption on nanocellulose surfaces. Cellulose 26:249–279CrossRef

Low KS, Lee CK, Mak SM (2004) Sorption of copper and lead by citric acid modified wood. Wood Sci Technol 38:629–640. https://doi.org/10.1007/s00226-003-0201-9CrossRef

Maturana H, Oyarzún J, Pasieczna A, Paulo A (2001) Geoquímica de los sedimentos del río Elqui (Coquimbo, Chile): manejo de relaves y cierre de minas. In: VII Congreso Argentino de Geología Económica. p Actas 2, pp 155–161

Mendoza L, Hossain L, Downey E et al (2019) Carboxylated nanocellulose foams as superabsorbents. J Colloid Interface Sci 538:433–439. https://doi.org/10.1016/j.jcis.2018.11.112CrossRefPubMed

Muñoz-Vélez MF, Hidalgo-Salazar MA, Mina-Hernández JH (2018) Effect of content and surface modification of fique fibers on the properties of a low-density polyethylene (LDPE)-Al/fique composite. Polymers (Basel) 10:1–14. https://doi.org/10.3390/polym10101050CrossRef

Naderi A (2017) Nanofibrillated cellulose: properties reinvestigated. Cellulose 24:1933–1945. https://doi.org/10.1007/s10570-017-1258-1CrossRef

Oyarzún J, Carvajal MJ, Maturana H et al (2013) Hydrochemical and isotopic patterns in a calc-alkaline Cu- and Au-rich arid Andean basin: the Elqui River watershed, North Central Chile. Appl Geochemistry 33:50–63. https://doi.org/10.1016/j.apgeochem.2013.01.014CrossRef

Patiño-Masó J, Serra-Parareda F, Tarrés Q et al (2019) TEMPO-oxidized cellulose nanofibers: A potential bio-based superabsorbent for diaper production. Nanomaterials. https://doi.org/10.3390/nano9091271CrossRefPubMedPubMedCentral

Pizarro J, Vergarda PM, Rodríguez JA, Valenzuela AM (2010) Heavy metals in northern Chilean rivers: spatial variation and temporal trends. J Hazard Mater 181:747–754CrossRef

Saito T, Isogai A (2004) TEMPO-mediated oxidation of native cellulose. The effect of oxidation conditions on chemical and crystal structures of the water-insoluble fractions. Biomacromol 5:1983–1989. https://doi.org/10.1021/bm0497769CrossRef

Serra A, González I, Oliver-Ortega H et al (2017) Reducing the amount of catalyst in TEMPO-oxidized cellulose nanofibers: effect on properties and cost. Polymers (Basel). https://doi.org/10.3390/polym9110557CrossRef

Shinoda R, Saito T, Okita Y, Isogai A (2012) Relationship between Length and Degree of Polymerization of TEMPO-Oxidized Cellulose Nanofibrils. Biomacromol 13:842–849CrossRef

Sun B, Gu C, Ma J, Liang B (2005) Kinetic study on TEMPO-mediated selective oxidation of regenerated cellulose. Cellulose 12:59–66. https://doi.org/10.1007/s10570-004-0343-4CrossRef

TAPPI (2011) Standard Terms and Their Definition for Cellulose Nanomaterial. pp 1–6

Tarrés Q, Oliver-Ortega H, Llop M et al (2016) Effective and simple methodology to produce nanocellulose-based aerogels for selective oil removal. Cellulose 23:3077–3088. https://doi.org/10.1007/s10570-016-1017-8CrossRef

Tarrés Q, Mutjé P, Delgado-Aguilar M (2019) Towards the development of highly transparent, flexible and water-resistant bio-based nanopapers: tailoring physico-mechanical properties. Cellulose 26:6917–6932. https://doi.org/10.1007/s10570-019-02524-8CrossRef

Tarrés Q, Oliver-Ortega H, Boufi S et al (2020b) Evaluation of the fibrillation method on lignocellulosic nanofibers production from eucalyptus sawdust: A comparative study between high-pressure homogenization and grinding. Int J Biol Macromol 145:1199–1207. https://doi.org/10.1016/J.IJBIOMAC.2019.10.046CrossRefPubMed

Tarrés Q, Oliver-Ortega H, Alcalà M et al (2020a) Research on the strengthening advantages on using cellulose nanofibers as polyvinyl alcohol reinforcement. Polymers (Basel). https://doi.org/10.3390/POLYM12040974CrossRef

The General Assembly of United Nations (2015) Transforming our world: the 2030 Agenda for Sustainable Development. Resolut. Adopt. by Gen. Assem. 25 Sept. 2015 pp 1–35

Uddin MK (2017) A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade. Chem Eng J 308:438–462CrossRef

Veglio F, Esposito A, Reverberi AP (2002) Copper adsorption on calcium alginate beads: equilibrium pH- related models. Hydrometallurgy 65:43–57CrossRef

Visa M (2016) Synthesis and characterization of new zeolite materials obtained from fly ash for heavy metals removal in advanced wastewater treatment. Powder Technol 294:338–347. https://doi.org/10.1016/j.powtec.2016.02.019CrossRef

Wan Ngah WS, Hanafiah MAKM (2008) Removal of heavy metal ions from wastewater by chemically modified plant wastes as adsorbents: A review. Bioresour Technol 99:3935–3948. https://doi.org/10.1016/j.biortech.2007.06.011CrossRefPubMed

Yang Q, Saito T, Isogai A (2012) Facile fabrication of transparent cellulose films with high water repellency and gas barrier properties. Cellulose 19:1913–1921. https://doi.org/10.1007/s10570-012-9790-5CrossRef

Yang Q, Takeuchi M, Saito T, Isogai A (2014) Formation of nanosized islands of dialkyl β-ketoester bonds for efficient hydrophobization of a cellulose film surface. Langmuir 30:8109–8118CrossRef

Yang J, Hou B, Wang J et al (2019) Nanomaterials for the removal of heavy metals from wastewater. Nanomaterials. https://doi.org/10.3390/nano9030424CrossRefPubMedPubMedCentral

Yu Y, Shapter JG, Popelka-Filcoff R et al (2014) Copper removal using bio-inspired polydopamine coated natural zeolites. J Hazard Mater 273:174–182. https://doi.org/10.1016/j.jhazmat.2014.03.048CrossRefPubMed

Yu S, Wang X, Ai Y et al (2016) Spectroscopic and theoretical studies on the counterion effect of Cu(ii) ion and graphene oxide interaction with titanium dioxide. Environ Sci Nano 3:1361–1368. https://doi.org/10.1039/c6en00297hCrossRef

Zhang Z, Sèbe G, Rendtsch D et al (2014) Ultralightweight and flexible silylated nanocellulose sponges for the selective removal of oil from water. Chem Mater 26:2659–2668CrossRef

Zhu H, Parvinian S, Preston C et al (2013) Transparent nanopaper with tailored optical properties. Nanoscale 5:3787–3792. https://doi.org/10.1039/c3nr00520hCrossRefPubMed

Zimmermann MVG, Borsoi C, Lavoratti A et al (2016) Drying techniques applied to cellulose nanofibers. J Reinf Plast Compos 35:628–643CrossRef

Titel: Comparative assessment of cellulose nanofibers and calcium alginate beads for continuous Cu(II) adsorption in packed columns: the influence of water and surface hydrophobicity
verfasst von: Núria Fiol
Quim Tarrés
Matías G. Vásquez
Miguel A. Pereira
Regis Teixeira Mendonça
Pere Mutjé
Marc Delgado-Aguilar
Publikationsdatum: 16.03.2021
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 7/2021
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-021-03809-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 7/2021

Base activation of persulfate: an effective pretreatment method to enhance glucose production from lignocellulosic biomass

Deposition of carbon–tungsten carbide on coir pulp to improve its compatibility with polylactic acid

Lignocellulosic biomass and carbohydrates as feed-stock for scalable production of 5-hydroxymethylfurfural

Sound absorption properties of wood-based pulp fibre foams

Micro fibrillated cellulose reinforced bio-based rigid high-density polyurethane foams

Graft copolymerization of MA/(TFEA or TFPM) onto cellulosic fibers for surface hydrophobicity