Effect of bonding temperature on hermetic seal and mechanical support of wafer-level Cu-to-Cu thermo-compression bonding for 3D integration

Hermetic seal and mechanical support of wafer-level Cu-to-Cu thermo-compression bonding with different bonding temperature are analyzed in this work. The investigation consists of two parts: hermetic seal study using helium bomb test and mechanical support study using four-point bending method. The wafer pairs are bonded at 250, 300 and 350 °C, respectively, under a bonding force of 5,500 N for a duration of 1 h in vacuum (~2.5 × 10⁻⁴ mbar). The bonding medium consists of Cu (300 nm) bonding layer and Ti (50 nm) barrier layer. Excellent helium leak rate, which is smaller than the reject limit defined by MIL-STD-883E standard (method 1014.10), and outstanding interfacial adhesion energy are detected for all samples. The cavities sealed at 300 °C present an excellent reliability of temperature cycling test up to 500 cycles. Cu-to-Cu thermo-compression bonding at low temperature (≤300 °C) presents an attractive hermetic seal and a robust mechanical support for 3D integration application.