nach oben

Journal of Materials Science

Erschienen in:

04.03.2022 | Metals & corrosion

Effects of pearlite on corrosion initiation and propagation in weathering steels in marine environments

verfasst von: Zhihui Wang, Xian Zhang, Hongwei Yu, Jing Liu, Lin Cheng, Shu-E. Hu, Kaiming Wu

Erschienen in: Journal of Materials Science | Ausgabe 10/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The effects of pearlite on the initiation and propagation of localized corrosion in Q370qD and Q370qE weathering steels under a simulated marine environment were examined by scanning Kelvin probe force microscopy, scanning electron microscope, scanning vibrating electrode technique and X-ray diffraction. Pearlite was uniformly distributed in Q370qD steel, whereas it displayed a banded distribution with a relatively higher proportion in Q370qE steel. Proeutectoid ferrite around pearlite and lamellar ferrite inside pearlite preferentially dissolved as the anode of micro-galvanic couples, and lamellar cementite acted as the cathode. The coarser interlamellar spacing and higher pearlite content enhanced the micro-galvanic effects in the microstructure and promoted localized corrosion propagation rate. The corrosion rate of Q370qE steel was higher than that of Q370qD steel. With the extension of corrosion time, corrosion products preferentially accumulated on the pearlite phase. The banded pearlite microstructure caused surface defects in rust layers. Uniformly distributed pearlite microstructure was more conducive to the formation of a dense rust layer.

Vorheriger Artikel Deformation twinning to dislocation slip transition in single-crystal tantalum under dynamic compression

Nächster Artikel Formation of pure -phase in Mn–Al–C by fast annealing using spark plasma sintering

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Urban V, Krivy V, Kreislova K (2015) The development of corrosion processes on weathering steel bridges. Proced Eng 114:546–554. https://doi.org/10.1016/j.proeng.2015.08.104CrossRef

Wang J, Wang ZY, Ke W (2013) A study of the evolution of rust on weathering steel submitted to the Qinghai salt lake atmospheric corrosion. Mater Chem Phys 139(1):225–232. https://doi.org/10.1016/j.matchemphys.2013.01.028CrossRef

Palsson NS, Wongpinkaew K, Khamsuk P, Sorachot S, Pongsaksawad W (2019) Outdoor atmospheric corrosion of carbon steel and weathering steel exposed to the tropical-coastal climate of Thailand. Mater Corros 71(6):1019–1034. https://doi.org/10.1002/maco.201911340CrossRef

Krivy V, Kubzova M, Konecny P, Kreislova K (2019) Corrosion processes on weathering steel bridges influenced by deposition of de-icing salts. Materials (Basel) 12(7):1089. https://doi.org/10.3390/ma12071089CrossRef

Ri I, Ri G, By A (2004) The effect of nonmetal inclusions and microstructure on local corrosion of carbon and low-alloyed steels. Prot Met 40(5):447–452. https://doi.org/10.1023/B:PROM.0000043062.19272.c5CrossRef

Huang F, Li XG, Liu J, Qu YM, Du CW (2012) Effects of alloying elements, microstructure, and inclusions on hydrogen induced cracking of X120 pipeline steel in wet H₂S sour environment. Mater Corros 63(1):59–66. https://doi.org/10.1002/maco.201005649CrossRef

Zheng SQ, Li CY, Qi YM, Chen LQ, Chen CF (2013) Mechanism of (Mg, Al, Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion. Corrros sci 67:20–31. https://doi.org/10.1016/j.corsci.2012.09.044CrossRef

Xue W, Li ZL, Xiao K, Yu W, Song JL, Chen JH, Dong CF, Li XG (2020) Initial microzonal corrosion mechanism of inclusions associated with the precipitated (Ti, Nb)N phase of Sb-containing weathering steel. Corros Sci 163:108232. https://doi.org/10.1016/j.corsci.2019.108232CrossRef

Wang LW, Xin JC, Cheng LJ, Zhao K, Sun BZ, Li JR, Wang X, Cui ZY (2019) Influence of inclusions on initiation of pitting corrosion and stress corrosion cracking of X70 steel in near-neutral pH environment. Corros Sci 147:108–127. https://doi.org/10.1016/j.corsci.2018.11.007CrossRef

10.

Zhang X, Wei WZ, Cheng L, Liu J, Wu KM, Liu M (2019) Effects of niobium and rare earth elements on microstructure and initial marine corrosion behavior of low-alloy steels. Appl Surf Sci 475:83–93. https://doi.org/10.1016/j.apsusc.2018.12.243CrossRef

11.

Wei WZ, Wu KM, Zhang X, Liu J, Qiu P, Cheng L (2020) In-situ characterization of initial marine corrosion induced by rare-earth elements modified inclusions in Zr–Ti deoxidized low-alloy steels. J Mater Res Technol 9(2):1412–1424. https://doi.org/10.1016/j.jmrt.2019.11.080CrossRef

12.

Wei W, Wu K, Liu J, Cheng L, Zhang X (2020) Initiation and propagation of localized corrosion induced by (Zr, Ti, Al)–O_x inclusions in low-alloy steels in marine environment. J Iron Steel Res Int 28(4):453–463CrossRef

13.

Wang ZH, Zhang X, Cheng L, Liu J, Wu KM (2021) Role of inclusion and microstructure on corrosion initiation and propagation of weathering steels in marine environment. J Mater Res Technol 10:306–321. https://doi.org/10.1016/j.jmrt.2020.11.096CrossRef

14.

Liu C, Cheng X, Dai Z, Liu R, Li Z, Cui L, Chen M, Ke L (2018) Title synergistic effect of Al₂O₃ inclusion and pearlite on the localized corrosion evolution process of carbon steel in marine environment. Materials (Basel) 11(11):2277. https://doi.org/10.3390/ma11112277CrossRef

15.

Makarov AV, Savrai RA, Schastlivtsev VM, Tabatchikova TI, Egorova LY (2007) Mechanical properties and fracture upon static tension of the high-carbon steel with different types of pearlite structure. Phys Met and Metallogr+ 104(5):522–534. https://doi.org/10.1134/s0031918x07110129CrossRef

16.

Diao G, Yan Q, Shi X, Zhang X, Wen Z, Jin X (2019) Improvement of wear resistance in ferrite-pearlite railway wheel steel via ferrite strengthening and cementite spheroidization. Mater Res Express 6(10):106513. https://doi.org/10.1088/2053-1591/ab3481CrossRef

17.

Hao X, Zhao X, Chen H, Huang B, Ma J, Wang C, Yang Y (2021) Comparative study on corrosion behaviors of ferrite-pearlite steel with dual-phase steel in the simulated bottom plate environment of cargo oil tanks. J Mater Res Technol 12:399–411. https://doi.org/10.1016/j.jmrt.2021.02.095CrossRef

18.

Kadowaki M, Muto I, Katayama H, Masuda H, Sugawara Y, Hara N (2019) Effectiveness of an intercritical heat-treatment on localized corrosion resistance at the microstructural boundaries of medium-carbon steels. Corros Sci 154:159–177. https://doi.org/10.1016/j.corsci.2019.04.019CrossRef

19.

Moon AP, Sangal S, Srivastav S, Gajbhiye NS, Mondal K (2014) Passivation and corrosion behavior of modified ferritic-pearlitic railway axle steels. J Mater Eng Perform 24(1):85–97. https://doi.org/10.1007/s11665-014-1252-9CrossRef

20.

Kadowaki M, Muto I, Sugawara Y, Doi T, Kawano K, Hara N (2017) Real-time microelectrochemical observations of very early stage pitting on ferrite-pearlite steel in chloride solutions. J Electrochem Soc 164(6):C261–C268. https://doi.org/10.1149/2.0801706jesCrossRef

21.

Zhang Y, Huang F, Hu Q, Peng ZX, Liu J (2020) Effect of micro-phase electrochemical activity on the initial corrosion dynamics of weathering steel. Mater Chem Phys 241:122045. https://doi.org/10.1016/j.matchemphys.2019.122045CrossRef

22.

Kadowaki M, Muto I, Takahashi K, Doi T, Masuda H, Katayama H, Kawano K, Sugawara Y, Hara N (2019) Anodic polarization characteristics and electrochemical properties of Fe₃C in chloride solutions. J Electrochem Soc 166(12):C345–C351. https://doi.org/10.1149/2.1311912jesCrossRef

23.

Hu L, Jie W, Junhua D, Yiqing C, Yumin W, Yangtao Z, Babu SD, Wei K (2021) Influence of cementite spheroidization on relieving the micro-galvanic effect of ferrite-pearlite steel in acidic chloride environment. J Mater Sci Technol 61:234–246. https://doi.org/10.1016/j.jmst.2020.05.031CrossRef

24.

Marder AR, Bramfitt BL (1975) Effect of continuous cooling on the morphology and kinetics of pearlite. Metall Trans A 6A:2009–2014. https://doi.org/10.1007/BF03161825CrossRef

25.

Marder AR, Bramfitt BL (1976) The effect of morphology on the strength of pearlite. Metall Trans A 7A:365–372. https://doi.org/10.1007/BF02642832CrossRef

26.

Cleary HJ, Greene ND (1967) Corrosion properties of iron and steel. Corros Sci 7:821–831. https://doi.org/10.1016/S0010-938X(67)80115-XCrossRef

27.

Sun F, Li X, Cheng X (2014) Effects of carbon content and microstructure on corrosion property of new developed steels in acidic salt solutions. Acta Metall Sin-Engl 27(1):115–123. https://doi.org/10.1007/s40195-013-0007-1CrossRef

28.

Katiyar PK, Misra S, Mondal K (2018) Effect of different cooling rates on the corrosion behavior of high-carbon pearlitic steel. J Mater Eng Perform 27(4):1753–1762. https://doi.org/10.1007/s11665-018-3256-3CrossRef

29.

Song Z, Guo T, Zhang Y, Nan X, Xu X, Dong Z (2020) The corrosion behavior of weathering bridge steel with oxide scale in different corrosion environments. Surf Topogr-Metrol 8(2):025004. https://doi.org/10.1088/2051-672X/ab8502CrossRef

30.

Wang G, Wu Q, Li X, Xu J, Xu Y, Shi W, Wang S (2019) Microscopic analysis of steel corrosion products in seawater and sea-sand concrete. Materials 12(20):3330. https://doi.org/10.3390/ma12203330CrossRef

31.

Díaz I, Cano H, Lopesino P, de la Fuente D, Chico B, Jiménez JA, Medina SF, Morcillo M (2018) Five-year atmospheric corrosion of Cu, Cr and Ni weathering steels in a wide range of environments. Corros Sci 141:146–157. https://doi.org/10.1016/j.corsci.2018.06.039CrossRef

32.

Cano H, Neff D, Morcillo M, Dillmann P, Diaz I, de la Fuente D (2014) Characterization of corrosion products formed on Ni 2.4 wt%–Cu 0.5 wt%–Cr 0.5 wt% weathering steel exposed in marine atmospheres. Corros Sci 87:438–451. https://doi.org/10.1016/j.corsci.2014.07.011CrossRef

33.

Diaz I, Cano H, de la Fuente D, Chico B, Vega JM, Morcillo M (2013) Atmospheric corrosion of Ni-advanced weathering steels in marine atmospheres of moderate salinity. Corros Sci 76:348–360. https://doi.org/10.1016/j.corsci.2013.06.053CrossRef

34.

Klomjit P, Omoda M, Mizuno D, Ishikawa N, Palsson N, Pongsaksawad W, Viyanit E (2019) Characterization of rust formed on structural carbon and weathering steels exposed to tropical climate of Thailand. Corrosion 75(8):960–972. https://doi.org/10.5006/3139CrossRef

35.

Yamashita HM (1994) The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century. Chemlnform 25(19):283–299. https://doi.org/10.1002/chin.199419012CrossRef

36.

Keiser JT (1982) The electrochemical reduction of rust films on weathering steel surfaces. J Electrochem Soc 129(12):2686–2689. https://doi.org/10.1149/1.2123648CrossRef

37.

Katiyar PK, Misra S, Mondal K (2019) Corrosion behavior of annealed steels with different carbon contents (0.002, 0.17, 0.43 and 0.7% C) in freely aerated 35% NaCl solution. J Mater Eng Perform 28(7):4041–4052. https://doi.org/10.1007/s11665-019-04137-5CrossRef

38.

Hao XH, Dong JH, Etim I-IN, Wei J, Ke W (2016) Sustained effect of remaining cementite on the corrosion behavior of ferrite-pearlite steel under the simulated bottom plate environment of cargo oil tank. Corros Sci 110:296–304. https://doi.org/10.1016/j.corsci.2016.04.042CrossRef

39.

Wu W, Cheng X, Zhao J, Li X (2020) Benefit of the corrosion product film formed on a new weathering steel containing 3% nickel under marine atmosphere in Maldives. Corros Sci 165:108416. https://doi.org/10.1016/j.corsci.2019.108416CrossRef

40.

Katiyar PK, Behera PK, Misra S, Mondal K (2019) Comparative corrosion behavior of five different microstructures of rebar steels in simulated concrete pore solution with and without chloride addition. J Mater Eng Perform 28(10):6275–6286. https://doi.org/10.1007/s11665-019-04339-xCrossRef

41.

Hubbard CR, Snyder RL (1988) RIR - measurement and use in quantitative XRD. Powder Diff 3(2):74–77. https://doi.org/10.1017/S0885715600013257CrossRef

42.

Cook DC, Oh SJ, Balasubramanian R, Yamashita M (1999) The role of goethite in the formation of the protective corrosion layer on steels. Hyperfine Interac 122(1–2):59–70. https://doi.org/10.1023/A:1012685320582CrossRef

43.

Wu W, Cheng X, Hou H, Liu B, Li X (2018) Insight into the product film formed on Ni-advanced weathering steel in a tropical marine atmosphere. Appl Surf Sci 436:80–89. https://doi.org/10.1016/j.apsusc.2017.12.018CrossRef

44.

Gu JF, Xiao Y, Dai NW, Zhang X, Ni QZ, Zhang JX (2019) The Suppression of transformation of γ-FeOOH to α-FeOOH accelerating the steel corrosion in simulated industrial atmospheric environment with a DC electric field interference. Corros Eng Sci Techn 54(3):249–256. https://doi.org/10.1080/1478422x.2019.1575553CrossRef

45.

Liu W, Liu J, Pan H, Cao F, Wu Z, Lv H, Xu Z (2020) Synergisic effect of Mn, Cu, P with Cr content on the corrosion behavior of weathering steel as a train under the simulated industrial atmosphere. J Alloy Compd 834:155095. https://doi.org/10.1016/j.jallcom.2020.155095CrossRef

46.

Morcillo M, Díaz I, Chico B, Cano H, de la Fuente D (2014) Weathering steels: from empirical development to scientific design. A review Corros Sci 83:6–31. https://doi.org/10.1016/j.corsci.2014.03.006CrossRef

47.

Wang ZF, Liu JR, Wu LX, Han RD, Sun YQ (2013) Study of the corrosion behavior of weathering steels in atmospheric environments. Corros Sci 67:1–10. https://doi.org/10.1016/j.corsci.2012.09.020CrossRef

48.

Li Dl Fu, Gq ZM, Li Q, Cx Y (2018) Effect of Ni on the corrosion resistance of bridge steel in a simulated hot and humid coastal-industrial atmosphere. Int J Miner Metall 25(3):325–338. https://doi.org/10.1007/s12613-018-1576-9CrossRef

49.

Liu H, Huang F, Yuan W, Hu Q, Cheng YF (2020) Essential role of element Si in corrosion resistance of a bridge steel in chloride atmosphere. Corros Sci 173:108758. https://doi.org/10.1016/j.corsci.2020.108758CrossRef

50.

Murayama M, Nishimura T, Tsuzaki K (2008) Nano-scale chemical analysis of rust on a 2% Si-bearing low alloy steel exposed in a coastal environment. Corros Sci 50(8):2159–2165. https://doi.org/10.1016/j.corsci.2008.05.022CrossRef

51.

Tewary NK, Kundu A, Nandi R, Saha JK, Ghosh SK (2016) Microstructural characterisation and corrosion performance of old railway girder bridge steel and modern weathering structural steel. Corros Sci 113:57–63. https://doi.org/10.1016/j.corsci.2016.10.004CrossRef

Titel: Effects of pearlite on corrosion initiation and propagation in weathering steels in marine environments
verfasst von: Zhihui Wang
Xian Zhang
Hongwei Yu
Jing Liu
Lin Cheng
Shu-E. Hu
Kaiming Wu
Publikationsdatum: 04.03.2022
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 10/2022
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-022-07001-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2022

Relation between chemical composition, morphology, and microstructure of poly(ether ether ketone)/reduced graphene oxide nanocomposite coatings obtained by electrophoretic deposition

Facile construction of single-crystalline sodium niobate anode materials: insight into the relationship of the morphology and excellent performance for lithium-ion batteries

Computational and experimental study of dental resin composites with high filler content

Enhanced room-temperature magnetoresistance of hybrid graphene nanosheets produced by a laser-assisted process

Suitability of thin-GaN for AlGaN/GaN HEMT material and device

F-doped carbon hollow nanospheres for efficient electrochemical oxygen reduction

Premium Partner

Marktübersichten