Erstmalig wurde im Rahmen eines Forschungsprojekts ein Rumpfsegment in Originalgröße aus thermoplastischen CFK hergestellt. Sowohl Gewicht als auch die Herstellkosten sollen damit um 10 % sinken.
In der Fertigungsbranche ist das Thema generative künstliche Intelligenz angekommen, in industriellen Prozessen etabliert ist die Technologie bislang laut McKinsey aber kaum.
Leichtbauprodukte aus nachwachsenden Rohmaterialien gelten als nachhaltig. Fraunhofer WKI arbeitet an entsprechenden Werkstoffen – unter besonderer Berücksichtigung der Recyclingfähigkeit
Der Bedarf an Lithium, Nickel und anderen kritischen Rohstoffen steigt. Bis 2030 soll das Angebot an Lithium und Nickel auf dem Weltmarkt nur knapp den Bedarf decken – und gibt es erhebliche Planungsunsicherheiten.
Mit einer Rolle Klebeband im Notfallkoffer lassen sich auf der Reise im Wohnwagen oder Camping-Bus kleinere Klebungen und Abdichtungen unkompliziert erledigen.
Damit Spielekonsolen einwandfrei funktionieren und viel Spielspaß bieten, muss eine Vielzahl an Komponenten auf kleinstem Raum miteinander verbunden werden. Die Klebtechnik spielt dabei eine wichtige Rolle.
Christoph Kowitz hat Anfang Mai die Leitung der US-Landesgesellschaft Wacker Chemical Corporation (WCC) übernommen. Er folgt David Wilhoit nach, der seit 2015 für das Nord- und Mittelamerikageschäft des Konzerns verantwortlich war.
Steam dryness is an important parameter for evaluating the quality of the wet steam injected in heavy oil thermal recovery engineering. The matrix conductivity method is a new steam dryness measurement method based on the wire-mesh measurement …
The composite concrete-encased steel (CCES) column member is made by the steel section embedded and covered in concrete from all sides. Due to the ability of the composite sections to bear heavy loads while using smaller sections, CCES columns …
In the context of a sustainable use of resources with the aim of the reduction of the CO2 footprint, the development of alternative concrete materials has attracted a great deal of attention. In this context, geopolymers, obtained from common clay …
The kinematic equivalent model of an existing ankle-rehabilitation robot is inconsistent with the anatomical structure of the human ankle, which influences the rehabilitation effect. Therefore, this study equates the human ankle to the UR model …
This chapter is designed to provide a single source for habitability criteria suitable for workboats. This chapter may be applied to vessels falling under the following categories: offshore support vessels, tugboats, tow boats, dredgers, research …
The IMO Resolution A.1021(26), Code on Alerts and Indicators, provides us with the “general design guidance to promote uniformity of type, location, and priority…” for alerts and indicators. Where applicable, that IMO resolution should be used for …
Work required of bridge personnel extends well beyond that imposed by primary operational and system requirements. Often, analysis of functions and identification of requirements examine only those tasks directly associated with piloting and …
Working and/or living on board vessels imposes a series of generally low-frequency mechanical vibration, as well as single-impulse shock loads on the human body. Low-frequency vibrations are also imposed by vessel motions, which are produced by …
Sind Sie Experte in den Bereichen Pkw-Motorentechnologie, Nfz-Motorentechnologie oder Nachhaltige Kraftstoffe & Energie? Dann bewerben Sie sich mit einem Vortrag für den 12. Internationalen Motorenkongress 2025!
Audi hat den A6 überarbeitet. Die neue Modellgeneration wirkt auf den ersten Blick kaum verändert, aber unter der Außenhaut befinden sich neue Otto- und Dieselmotoren, Getriebe und zahlreiche Leichtbaukomponenten. Für die Kraftübertragung stellt Audi vier unterschiedliche Getriebetypen für den A6 bereit.