nach oben

Cellulose

Erschienen in:

09.06.2018 | Original Paper

Crease resistance improvement of hemp biofiber fabric via sol–gel and crosslinking methods

verfasst von: Buket Arık, Ozan Avinc, Arzu Yavas

Erschienen in: Cellulose | Ausgabe 8/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, crease resistance finish with sol–gel method, crosslinking method and commercial crease resistant finish products were applied to hemp biofiber cellulosic fabrics and the effects of these studied methods on hemp fabrics were investigated by physical performance tests and characterization analyses. In addition, chitosan biopolymer was also studied to investigate its effects on performance properties of hemp cellulosic fabrics. It was determined that sol–gel method and crosslinking method could be used to improve crease resistance property of hemp fabrics. Both sol–gel and crosslinking methods exhibited comparable close results to studied commercial crease resistant finish products, but sol–gel method was found to be better than crosslinking method especially when tensile and tear strength values were considered. The crease recovery angle values of these two methods were found to be quite close to the values of commercial products, on the other hand, chitosan biopolymer addition was not observed to be efficient in terms of crease resistance and physical performance properties.

Vorheriger Artikel Chitosan functionalization to prolong stable hydrophilicity of cotton thread for thread-based analytical device application

Nächster Artikel A simple method of fabricating nickel-coated cotton fabrics for wearable strain sensor

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Alongi J, Malucelli G (2013) Thermal stability, flame retardancy and abrasion resistance of cotton and cotton-linen blends treated by sol-gel silica coatings containing alumina micro- or nano-particles. Polym Degrad Stab 98:1428–1438CrossRef

Ammayappan L, Nayak LK, Ray DP, Das S, Roy AK (2013) Functional finishing of jute textiles—an overview in India. J Nat Fibers 10:390–413CrossRef

Arik B (2013) Investigation of chitosan applicability in medical textiles by using different application methods (Ph.D. thesis). Ege University Graduate School of Natural and Applied Science, Izmir, Turkey

Arik B (2015) Latest developments on crease resistance processes for cellulosic fabrics. Pamukkale Univ J Eng Sci 21(7):296–305CrossRef

Arik B, Yavas A, Avinc O (2017) Antibacterial and wrinkle resistance improvement on nettle biofiber using chitosan and BTCA. Fibres Text East Eur 3(123):106–111CrossRef

Bajaj P (2002) Finishing of textile materials. J Appl Polym Sci 83:631–659CrossRef

Bilgen M (2005) Wrinkle recovery for cellulosic fabric by means of ionic crosslinking (M.Sc. Thesis). Graduate Faculty of North Carolina State University, North Carolina, USA

Brancatelli G, Colleoni C, Massafra MR, Rosace G (2011) Effect of hybrid phosphorus-doped silica thin films produced by sol-gel method on the thermal behavior of cotton fabrics. Polym Degrad Stab 96:483–490CrossRef

Brzezinski S, Kowalczyk D, Borak B, Jasiorski M, Tracz A (2012) Applying the sol-gel method to the deposition of nanocoats on textiles to improve their abrasion resistance. J Appl Polym Sci 125:3058–3067CrossRef

Carty P, Byrne MS (1991) The chemical and mechanical finishing of textile materials, 2nd edn. Newcastle upon Tyne Polytechnic Products Ltd, Newcastle

Clarke RC (2010) Traditional fiber hemp (Cannabis) production, processing, yarn making, and weaving strategies—functional constraints and regional responses. Part 1. J Nat Fibers 7:118–153CrossRef

Dehabadi VA, Buschmann HJ, Gutmann JS (2013) Study of easy care and biostatic properties of finished cotton fabric with polyamino carboxylic acids. J Text Inst 104(4):414–418CrossRef

Fiscus G, Grunenwald D (1995) Textile finishing a complete guide, 1st edn. Editions High Textil, Sausheim

Fouda MMG, El Shafei A, Sharaf S, Hebeish A (2009) Microwave curing for producing cotton fabrics with easy care and antibacterial properties. Carbohyd Polym 77:651–655CrossRef

Garside P, Wyeth P (2006) Identification of cellulosic fibres by FTIR spectroscopy differentiation of flax and hemp by polarized ATR FTIR. Stud Conserv 51(3):205–211CrossRef

Gashti MP, Alimohammadi F, Shamei A (2012) Preparation of water-repellent cellulose fibers using a polycarboxylic acid/hydrophobic silica nanocomposite coating. Surf Coat Technol 206:3208–3215CrossRef

Gedik G, Avinc O (2018) Bleaching of hemp (Cannabis Sativa L.) fibers with peracetic acid for textiles industry purposes. Fibers Polym 19(1):82–93CrossRef

Gedik G, Avinç OO, Yavaş A (2010) Hemp fiber properties and its advantages in textile industry. Electron J Text Technol 4(3):39–48

Gürsoy NÇ, Armağan OG, Şahin UK, Gül M (2010) Effects of alternative pre-treatments on performance of durable press finished fabric. J Text Appar Tekst Konfeks 20(4):336–342

Harifi T, Montazer M (2012) Past present and future prospects of cotton cross-linking: new insight into nanoparticles. Carbohyd Polym 88:1125–1140CrossRef

Hebeish A, Hashem M, Abdel-Rahman A, El-Hilw ZH (2006) Improving easy care nonformaldehyde finishing performance using polycarboxylic acids via precationization of cotton fabric. J Appl Polym Sci 100:2697–2704CrossRef

Hebeish A, Abdel-Mohdy FA, Fouda MMG, Elsaid Z, Essam S, Tamam GH, Drees EA (2011) Green synthesis of easy care and antimicrobial cotton fabrics. Carbohyd Polym 86:1684–1691CrossRef

Hill DJ, Hall ME, Holmes DA, Lomas M, Padmore K (1993) An introduction to textiles volume IV textile wet processing. Comett Eurotex, Bolton

Hwang MS, Ji DS (2012) The effects of yarn number and liquid ammonia treatment on the physical properties of hemp woven fabrics. Fibers Polym 13(10):1335–1340CrossRef

Ibrahim NA, Hashem MM, Eid MA, Refai R, El-Hossamy M, Eid BM (2010) Eco-friendly plasma treatment of linen-containing fabrics. J Text Inst 101(12):1035–1049CrossRef

Ibrahim NA, Eid BM, Abd El-Aziz E, Abou Elmaaty TM (2013) Functionalization of linen/cotton pigment prints using inorganic nano structure materials. Carbohyd Polym 97(2):537–545CrossRef

Kostic M, Pejic B, Skundric P (2008) Quality of chemically modified hemp fibers. Biores Technol 99:94–99CrossRef

Kozlowski R, Baraniecki P, Barriga-Bedoya J (2005) Bast fibres (flax, hemp, jute, ramie, kenaf, abaca). In: Blackburn RS (ed) Biodegradable and sustainable fibres, Chap 2. Woodhead Publishing, England, pp 36–86

Lacasse K, Baumann W (2004) Textile chemicals environmental data and facts, 1st edn. Springer, HeidelbergCrossRef

Lam YL, Kan CW, Yuen CWM (2010) Wrinkle-resistant finishing of cotton fabric with BTCA: the effect of co-catalyst. Text Res J 81(5):482–493CrossRef

Lam YL, Kan CW, Yuen CWM (2011) Physical and chemical analysis of plasma-treated cotton fabric subjected to wrinkle-resistant finishing. Cellulose 18:493–503CrossRef

Lewis DM, Voncina B (1997) Durable press finishing of cotton with polycarboxylic acids. II. Ester crosslinking of cotton with dithiosuccinic acid derivative of S-Triazine. J Appl Polym Sci 66:171–177CrossRef

Li F, Xing Y, Ding X (2008) Silica xerogel coating on the surface of natural and synthetic fabrics. Surf Coat Technol 202:721–4727

Li J, Feng J, Zhang H, Zhang J (2010) Wear properties of hemp, ramie and linen fabrics after liquid ammonia/crosslinking treatment. Fibres Text East Eur 18(5):81–85

Liu L, Li B, Xiang Y, Zhang R, Yu J, Fang B (2018) Effect of growth period and sampling section on the chemical composition and microstructure of raw hemp fibers. BioResources 13(1):1961–1976

Nazari A, Montazer M, Rashidi A, Yazdanshenas M, Anary-Abbasinejad M (2009) Nano TiO₂ photo-catalyst and sodium hypophosphite for cross-linking cotton with poly carboxylic acids under UV and high temperature. Appl Catal A 371:10–16CrossRef

Needles HL (1986) Textile fibers dyes finishes and processes a concise guide, 1st edn. Noyes, New Jersey

Onar N, Mete G (2016) Development of water repellent cotton fabric with application of ZnO Al₂O₃ TiO₂ and ZrO₂ nanoparticles modified with ormosils. J Text Appar Tekst Konfeks 26(3):295–302

Onar N, Mete G, Aksit A, Kutlu B, Çelik E (2015) Water- and oil-repellency properties of cotton fabric treated with silane, Zr, Ti based nanosols. Int J Text Sci 4(4):84–96

Pejic BM, Kostic MM, Skundric PD, Praskalo JZ (2008) The effects of hemicelluloses and lignin removal on water uptake behavior of hemp fibers. Biores Technol 99:7152–7159CrossRef

Perkins WS (1996) Textile coloration and finishing, 1st edn. Carolina Academic Pres, North Carolina USA

Rachini A, Troedec ML, Peyratout C, Smith A (2012) Chemical modification of hemp fibers by silane coupling agents. J Appl Polym Sci 123:601–610CrossRef

Ramesh M (2018) Hemp, jute, banana, kenaf, ramie, sisal fibers. In: Handbook of properties of textile and technical fibres (2nd edn). A volume in The Textile Institute Book Series, vol 9, pp 301–325

Roe BG (2008) Durable non-fluorine water-repellent fabric finishing: surface treatment using silica nanoparticulates and mixed silanes (M.Sc. Thesis). Graduate Faculty of North Carolina State University, Raleigh, North Carolina, USA

Sauperl O, Stana-Kleinschek K (2010) Differences between cotton and viscose fibers crosslinked with BTCA. Text Res J 80(4):383–392CrossRef

Schramm C, Rinderer B (2015) Non-formaldeyhde crease-resistant modification of cellulosic material by means of an organotrialkoxysilane and metal alkoxides. Cellulose 22:2811–2824CrossRef

Schramm C, Binder WH, Tessadri R (2004) Durable press finishing of cotton fabric with 1234-butanetetracarboxylic acid and TEOS/GPTMS. J Sol-Gel Sci Technol 29:155–165CrossRef

Schramm C, Rinderer B, Binder WH, Tessadri R, Duelli H (2005) Treatment of 1,3-dimethylol-4,5-dihydroxyimidazolidine-2-one Finished cellulosic material with tetraethoxysilane or glycidyloxypropyl-trimethoxysilane solutions. J Mater Sci 40:1883–1891CrossRef

Shahzad A (2011) Hemp fiber and its composites: a review. J Compos Mater 46(8):973–986CrossRef

Sharpe G, Mallinson P (2003) Easy-care finishing of cellulosics. In: Heywood D (ed) Textile finishing. Society of Dyers and Colourists, Hampshire

Surina R, Andrassy M (2013) Effect of preswelling and ultrasound treatment on the properties of flax fibers cross-linked with polycarboxylic acids. Text Res J 83(1):66–75CrossRef

Vihodceva S, Kukle S (2011) Natural textile surface modification using sol-gel technique. Sci J Riga Tech Univ Mater Sci Text Cloth Technol 6:1–5

Yang CQ (1991) Characterizing ester crosslinkages in cotton cellulose with FTIR photoacoustic spectroscopy. Text Res J 61(5):298–305CrossRef

Yang CQ, Bakshi GD (1996) Quantitative analysis of the nonformaldehyde durable press finish on cotton fabric: acid-base titration and infrared spectroscopy. Text Res J 66(6):377–384CrossRef

Yang CQ, Wang X (1996) Formation of cyclic anhydride intermediates and esterification of cotton cellulose by multifunctional carboxylic acids: an infrared spectroscopy study. Text Res J 66(9):595–603CrossRef

Yu C (2015) Natural textile fibres: vegetable fibres. In: Textiles and fashion. A volume in Woodhead Publishing Series in Textiles, Chap 2, pp 29–56

Zhou W, Yang CQ, Lickfield GC (2004a) Mechanical strength of durable press finished cotton fabric part V: poly (vinyl alcohol) as an additive to improve fabric abrasion resistance. J Appl Polym Sci 1(91):3940–3946CrossRef

Zhou LM, Yeung KW, Yuen CWM, Zhou X (2004b) Characterization of ramie yarn treated with sodium hydroxide and crosslinked by 1234-butanetetracarboxylic acid. J Appl Polym Sci 91:1857–1864CrossRef

Zhou LM, Yeung KW, Yuen CWM, Zhou X (2007) Effect of mercerization on the crosslinking of ramie fabric using 1234-butanetetracarboxylic acid: physical properties and crosslink distribution. Text Res J 72(9):795–802CrossRef

Zimniewska M, Batog J, Bogacz E, Romanowska B (2012) Functionalization of natural fibres textiles by improvement of nanoparticles fixation on their surface. J Fiber Bioeng Inform 5(3):321–339CrossRef

Titel: Crease resistance improvement of hemp biofiber fabric via sol–gel and crosslinking methods
verfasst von: Buket Arık
Ozan Avinc
Arzu Yavas
Publikationsdatum: 09.06.2018
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 8/2018
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-018-1885-1

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 8/2018

Effects of chitin nanofibers on the microstructure and properties of cellulose nanofibers/chitin nanofibers composite aerogels

Effect of hydrothermal treatment of microfibrillated cellulose on rheological properties and formation of hydrolysis products

Design and synthesis of functionalized cellulose nanocrystals-based drug conjugates for colon-targeted drug delivery

Cellulose acetate fibres surface modified with AlOOH/Cu particles: synthesis, characterization and antimicrobial activity

Liquefaction of poplar biomass for value-added platform chemicals

A facile approach to prepare biomass-derived activated carbon hollow fibers from wood waste as high-performance supercapacitor electrodes