nach oben

Mechanics of Composite Materials

Erschienen in:

01.01.2015

Modeling Large Deformations of Fibrous Bodies of Revolution Based on Applied and Carcass Theories 3. Rotational Motion

verfasst von: V. M. Akhundov

Erschienen in: Mechanics of Composite Materials | Ausgabe 6/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Based on applied and two-level (carcass) theories, results obtained by solving the problem on cylinders with two- and three-orthogonal reinforcement schemes, where fibers are oriented in the longitudinal, circumferential, and radial directions, under the action of inertial forces caused by rotational motion are presented. The results obtained by both the theories are compared, from which follows the possibility of application of the applied theory to the investigation of bodies highly filled with fibers.

Vorheriger Artikel Elastic and Thermal Behavior of a Layered Structure I. Experiment and Theory

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

V. M. Akhundov, “Modeling large deformations of fibrous bodies of revolution based on applied and carcass theories. 1. Butt-end torsion of cylindrical and toroidal вodies,” Mech. Compos. Mater., 50, No. 2, 245–256 (2014).CrossRef

V. M. Akhundov, “Modeling large deformations of fibrous bodies of revolution based on applied and carcass theories. 2. Reduction by pressure,” Mech. Compos. Mater., 50, No. 3, 329–334 (2014).CrossRef

V. M. Akhundov, “Applied theory of composites with a small content of fibers under large deformations,” Mech. Compos. Mater. Struct., 7, No. 1, 3–15 (2001).

V. M. Akhundov, “Structural macroscopic theory of stiff and soft composites. Invariant description,” Mech. Compos. Mater., 34, No. 5, 419–432 (1998).CrossRef

V. M. Akhundov, “Carcass theory of stiff and soft composites with uncurved and curved structures. Invariant description,” Mech. Compos. Mater. Struct., 6, No. 2, 275–293 (2000).

N. S. Bakhvalov, N. P. Zhidkov, and G. M. Kobel’kov, Numerical Methods [in Russian], Nauka, Moscow (1987).

F. L. Chernous’ko and V. P. Banichuk, Variational Problems of Mechanics and Control [in Russian], Nauka, Moscow (1973).

A. S. Sakharov and I. Altenbach (eds.), Finite-Element Method in the Mechanics of Solid Bodies [in Russian], Vishcha Shkola, Kiev (1982).

R. P. Fedorenko, Approximate Solution of Problems of Optimum Control [in Russian], Nauka, Moscow (1978).

10.

M. Levinson and I. W. Burgess, “A comparison of some simple constitutive relations for slightly compressible rubberlike materials,” Int. J. Mech. Sci., 13, 563–572 (1971).CrossRef

11.

P. J. Blatz, Application of Finite Elastic Theory in Predicting the Performance of Solid Propellant Rocket Motors, Calif. Inst. Techn. GALCJISM (1960), pp. 60–125.

12.

V. M. Akhundov, “Analysis of elastomeric composites based on fiber-reinforced systems. 3. Two-directional composites,” Mech. Compos. Mater., 35, No. 4, 325–336 (1999).CrossRef

13.

V. M. Akhundov, “Analysis of elastomeric composites based on fiber-reinforced systems. 4. Three-directional composites,” Mech. Compos. Mater., 37, No. 3, 223–236 (2001).CrossRef

Titel: Modeling Large Deformations of Fibrous Bodies of Revolution Based on Applied and Carcass Theories 3. Rotational Motion
verfasst von: V. M. Akhundov
Publikationsdatum: 01.01.2015
Verlag: Springer US
Erschienen in: Mechanics of Composite Materials / Ausgabe 6/2015
Print ISSN: 0191-5665
Elektronische ISSN: 1573-8922
DOI: https://doi.org/10.1007/s11029-015-9470-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2015

Transverse Shear Behavior of a Nomex Core for Sandwich Panels

Moisture Sorption of Epoxy Composites Reinforced with Aligned and Notched Triangular Bars

Influence of Dissimilar Adherends on the Stress Distribution in Adhesively Bonded Composite Joints Subjected to Impact Loadings

Energy of the Mechanical Destruction of an Elastomer Filled with Solid Particles

Effect of Technological Tensioning on the Efficiency of Reinforcement of Pipelines with Composite Bands

Application of the Inverse Heat Conduction Analysis to the Evaluation of Defects in Carbonfiber-Reinforced Plastics

Premium Partner

Marktübersichten