Skip to main content
Erschienen in: Metallurgical and Materials Transactions B 2/2014

01.04.2014

The Evolution of Structural Order as a Measure of Thermal History of Coke in the Blast Furnace

verfasst von: Maria Lundgren, Rita Khanna, Lena Sundqvist Ökvist, Veena Sahajwalla, Bo Björkman

Erschienen in: Metallurgical and Materials Transactions B | Ausgabe 2/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Investigations were carried out on cokes heat treated in the laboratory and on cokes extracted from the experimental blast furnace (EBF) raceway and hearth. X-ray diffraction (XRD) measurements were performed to investigate changes in structural order (L c), chemical transformations in coke ash along with comparative thermodynamic equilibrium studies and the influence of melt. Three data processing approaches were used to compute L c values as a function of temperature and time and linear correlations were established between L c and heat treatment temperatures during laboratory investigations. These were used to estimate temperatures experienced by coke in various regions of EBF and estimated raceway temperatures were seen to follow the profile of combustion peak. The MgAl2O4 spinel was observed in coke submerged in slag during laboratory studies and in cokes found further into the raceway. Coke in contact with hot metal showed XRD peaks corresponding to presence of Fe3Si. The intensity of SiO2 peak in coke ash was seen to decrease with increasing temperature and disappeared at around 1770 K (1500 °C) due to the formation of SiC. This study has shown that the evolution of structural order and chemical transformations in coke could be used to estimate its thermal history in blast furnaces.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat The Iron and Steel Institute of Japan: Blast Furnace Phenomena and Modelling, Elsevier Applied Science Publishers, Essex, U.K., 1987, pp. 3–62, 350–51. The Iron and Steel Institute of Japan: Blast Furnace Phenomena and Modelling, Elsevier Applied Science Publishers, Essex, U.K., 1987, pp. 3–62, 350–51.
2.
Zurück zum Zitat A. Cheng: I&SM, Iron Steelmak., 2001, vol. 28, No.8, pp. 78–81. A. Cheng: I&SM, Iron Steelmak., 2001, vol. 28, No.8, pp. 78–81.
3.
Zurück zum Zitat A. Cheng: I&SM, Iron Steelmak., 2001, vol. 28, No.1, pp. 30–32. A. Cheng: I&SM, Iron Steelmak., 2001, vol. 28, No.1, pp. 30–32.
4.
Zurück zum Zitat A. Cheng: I&SM, Iron Steelmak., 2001, vol. 28, No.2, pp. 57–60. A. Cheng: I&SM, Iron Steelmak., 2001, vol. 28, No.2, pp. 57–60.
5.
Zurück zum Zitat A. K. Biswas: Principles of Blast furnace Ironmaking, Theory and Practice, Cootha Publishing House, Brisbane, 1981, pp. 1–13. A. K. Biswas: Principles of Blast furnace Ironmaking, Theory and Practice, Cootha Publishing House, Brisbane, 1981, pp. 1–13.
6.
Zurück zum Zitat T. Hilding, S. Gupta, V. Sahajwalla, B. Björkman and J-O. Wikström: ISIJ Int., 2005, vol. 45, pp. 1041–50.CrossRef T. Hilding, S. Gupta, V. Sahajwalla, B. Björkman and J-O. Wikström: ISIJ Int., 2005, vol. 45, pp. 1041–50.CrossRef
7.
Zurück zum Zitat B. van der Velden, M. te Lindert, and A.G.S. Steeghs: 60 th Ironmaking Conf. Proc., Baltimore, U.S., 2001, pp. 269–80. B. van der Velden, M. te Lindert, and A.G.S. Steeghs: 60 th Ironmaking Conf. Proc., Baltimore, U.S., 2001, pp. 269–80.
8.
Zurück zum Zitat B. van der Velden, J. Trouw, R. Chaigneau, and J. van der Berg: 58 th Ironmaking Conf. Proc., Chicago, U.S., 1991, pp. 275–85. B. van der Velden, J. Trouw, R. Chaigneau, and J. van der Berg: 58 th Ironmaking Conf. Proc., Chicago, U.S., 1991, pp. 275–85.
10.
Zurück zum Zitat I. Naruse, K. Nakayama, A. Higuchi, and Khairil (2000) ISIJ Int. 40:744–48.CrossRef I. Naruse, K. Nakayama, A. Higuchi, and Khairil (2000) ISIJ Int. 40:744–48.CrossRef
11.
Zurück zum Zitat A. Dahlstedt, M. Hallin, and J-O. Wikström: 4 th ECIC Proc., Paris, France, June 19–22, vol. 1, 2000, pp. 138–45. A. Dahlstedt, M. Hallin, and J-O. Wikström: 4 th ECIC Proc., Paris, France, June 19–22, vol. 1, 2000, pp. 138–45.
12.
Zurück zum Zitat M. Hallin, L. Hooey, J. Sterneland and D. Thulin: Rev. Métall., 2002, vol. 99, pp. 311–16.CrossRef M. Hallin, L. Hooey, J. Sterneland and D. Thulin: Rev. Métall., 2002, vol. 99, pp. 311–16.CrossRef
13.
Zurück zum Zitat M. Hallin: SCANMET III Conf. Proc., Luleå, Sweden, June 8–11, vol. 1, 2008, pp. 273–82. M. Hallin: SCANMET III Conf. Proc., Luleå, Sweden, June 8–11, vol. 1, 2008, pp. 273–82.
14.
Zurück zum Zitat L. Sundqvist Ökvist, M. Lundgren, J.-O. Wikström, and N. Eklund: 6 th ECIC, Düsseldorf, Germany, 27th June to 1st July, 2011. L. Sundqvist Ökvist, M. Lundgren, J.-O. Wikström, and N. Eklund: 6 th ECIC, Düsseldorf, Germany, 27th June to 1st July, 2011.
15.
Zurück zum Zitat M. Lundgren, L. Sundqvist Ökvist, G. Hyllander, and B. Björkman: SCANMET IV Conf. Proc., Luleå, Sweden, June 10–13, vol. 2, 2012, pp. 157–68. M. Lundgren, L. Sundqvist Ökvist, G. Hyllander, and B. Björkman: SCANMET IV Conf. Proc., Luleå, Sweden, June 10–13, vol. 2, 2012, pp. 157–68.
16.
Zurück zum Zitat M. Lundgren, U. Leimalm, G. Hyllander, L. Sundqvist Ökvist and B. Björkman: ISIJ Int., 2010, vol.50, pp. 1570–80.CrossRef M. Lundgren, U. Leimalm, G. Hyllander, L. Sundqvist Ökvist and B. Björkman: ISIJ Int., 2010, vol.50, pp. 1570–80.CrossRef
17.
Zurück zum Zitat L. Sundqvist Ökvist, B. Jansson, and P. Hahlin: ICSTI’06 Conf. Proc., Osaka, Japan, 26–30 November, 2006, pp. 327–30. L. Sundqvist Ökvist, B. Jansson, and P. Hahlin: ICSTI’06 Conf. Proc., Osaka, Japan, 26–30 November, 2006, pp. 327–30.
18.
Zurück zum Zitat L. Lu, V. Sahajwalla, C. Kong and D. Harris: Carbon, 2001, vol. 39, pp. 1821–33.CrossRef L. Lu, V. Sahajwalla, C. Kong and D. Harris: Carbon, 2001, vol. 39, pp. 1821–33.CrossRef
19.
Zurück zum Zitat S.H. Lee: PhD Thesis, UNSW, Faculty of Science and Technology, School of Materials and Science and Engineering, September 2009. S.H. Lee: PhD Thesis, UNSW, Faculty of Science and Technology, School of Materials and Science and Engineering, September 2009.
20.
21.
Zurück zum Zitat S. Gupta, V. Sahajwalla, J. Burgo, P. Chaubal and T. Youmans: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 385–94.CrossRef S. Gupta, V. Sahajwalla, J. Burgo, P. Chaubal and T. Youmans: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 385–94.CrossRef
22.
Zurück zum Zitat B.J. Monaghan, R. Nightingale, V. Daly and E. Fitzpatrick, Ironmaking Steelmaking, 2008, vol. 35, pp. 36–42.CrossRef B.J. Monaghan, R. Nightingale, V. Daly and E. Fitzpatrick, Ironmaking Steelmaking, 2008, vol. 35, pp. 36–42.CrossRef
23.
Zurück zum Zitat W. Wang, K.M. Thomas, R.M. Poultney and R.R. Willmers: Carbon, 1995, vol. 33, pp. 1525–35.CrossRef W. Wang, K.M. Thomas, R.M. Poultney and R.R. Willmers: Carbon, 1995, vol. 33, pp. 1525–35.CrossRef
24.
Zurück zum Zitat M. Kawakami, H. Kanba, K. Sato, T. Takenaka, S, Gupta, R. Chandratilleke and V. Sahajwalla: ISIJ Int., 2008, vol. 46, pp. 1165–70.CrossRef M. Kawakami, H. Kanba, K. Sato, T. Takenaka, S, Gupta, R. Chandratilleke and V. Sahajwalla: ISIJ Int., 2008, vol. 46, pp. 1165–70.CrossRef
25.
Zurück zum Zitat M. Kawakami, T. Karato, T. Tanaka and S, Yokoyama: ISIJ Int., 2005, vol. 45, pp. 1027–34.CrossRef M. Kawakami, T. Karato, T. Tanaka and S, Yokoyama: ISIJ Int., 2005, vol. 45, pp. 1027–34.CrossRef
26.
Zurück zum Zitat S.S. Gornostayev and J.J. Härkki: Carbon, 2007, vol. 45, pp. 1145–51.CrossRef S.S. Gornostayev and J.J. Härkki: Carbon, 2007, vol. 45, pp. 1145–51.CrossRef
27.
Zurück zum Zitat A.M. Alper (ed.): Phase Diagrams in Advanced Ceramics, Academic Press Inc., San Diego, 1995, p. 48. A.M. Alper (ed.): Phase Diagrams in Advanced Ceramics, Academic Press Inc., San Diego, 1995, p. 48.
28.
Zurück zum Zitat M. Grigore, R. Sakurovs, D. French and V. Sahajwalla: ISIJ Int., 2007, vol. 47, pp. 62–66.CrossRef M. Grigore, R. Sakurovs, D. French and V. Sahajwalla: ISIJ Int., 2007, vol. 47, pp. 62–66.CrossRef
29.
Zurück zum Zitat M. Grigore, R. Sakurovs, D. French and V. Sahajwalla: Int. J. Coal Geol., 2008, vol. 75, pp. 213–24.CrossRef M. Grigore, R. Sakurovs, D. French and V. Sahajwalla: Int. J. Coal Geol., 2008, vol. 75, pp. 213–24.CrossRef
30.
Zurück zum Zitat S.S. Gornostayev and J.J. Härkki: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 303–05.CrossRef S.S. Gornostayev and J.J. Härkki: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 303–05.CrossRef
31.
Zurück zum Zitat K. Ishii: Advanced Pulverized Coal Injection Technology of Blast Furnace Operation, Elsevier Science Ltd, Oxford, 2000, pp. 58–61. K. Ishii: Advanced Pulverized Coal Injection Technology of Blast Furnace Operation, Elsevier Science Ltd, Oxford, 2000, pp. 58–61.
32.
Zurück zum Zitat H. O Pierson: Handbook of carbon, graphite, diamond and fullerenes—Properties, Processing and Applications, Noyes publications, New Jersey, U.S., 1993, pp. 82. H. O Pierson: Handbook of carbon, graphite, diamond and fullerenes—Properties, Processing and Applications, Noyes publications, New Jersey, U.S., 1993, pp. 82.
33.
Zurück zum Zitat Z. Ye, S. Gupta, O. Kerkkonen, R. Kannila, and V. Sahajwalla: AISTech Conf. Proc., Indianapolis, U.S., vol. 1, 2–5 May, 2011, pp. 335–47. Z. Ye, S. Gupta, O. Kerkkonen, R. Kannila, and V. Sahajwalla: AISTech Conf. Proc., Indianapolis, U.S., vol. 1, 2–5 May, 2011, pp. 335–47.
34.
35.
Zurück zum Zitat Z. Ye, S. Gupta, O. Kerkkonen, R. Kannila and V. Sahajwalla: ISIJ Int., 2013, vol. 53, pp. 181–83.CrossRef Z. Ye, S. Gupta, O. Kerkkonen, R. Kannila and V. Sahajwalla: ISIJ Int., 2013, vol. 53, pp. 181–83.CrossRef
Metadaten
Titel
The Evolution of Structural Order as a Measure of Thermal History of Coke in the Blast Furnace
verfasst von
Maria Lundgren
Rita Khanna
Lena Sundqvist Ökvist
Veena Sahajwalla
Bo Björkman
Publikationsdatum
01.04.2014
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions B / Ausgabe 2/2014
Print ISSN: 1073-5615
Elektronische ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-013-9977-7

Weitere Artikel der Ausgabe 2/2014

Metallurgical and Materials Transactions B 2/2014 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.