nach oben

European Journal of Wood and Wood Products

Erschienen in:

01.08.2011 | Originals Originalarbeiten

Influence of low and moderate temperature kiln drying schedules on specific mechanical properties of Norway spruce wood

verfasst von: Laura Oltean, Alfred Teischinger, Christian Hansmann

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 3/2011

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The knowledge of the influence of different temperature ranges on mechanical properties of kiln dried timber is very important in structural applications. The current paper deals with an investigation of the influence of low and moderate temperature drying schedules on the selected mechanical properties of Norway spruce wood (Picea abies L.). The drying experiments were performed at four different temperatures (45, 55, 65, and 80°C) and clear wood specimens were prepared for the mechanical tests, three-point bending test, impact bending test, and tensile test perpendicular to the grain, respectively. The results of this systematic investigation were statistically analysed and as a conclusion, it can be stated that the mechanical properties investigated were not influenced by the drying temperatures applied.

Vorheriger Artikel Maintenance procedures and definition of limit states for exterior wood coatings

Nächster Artikel Development of a novel façade sandwich panel with low-density wood fibres core and wood-based panels as faces

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

ASTM D 143–83 (1992) Small clear specimens of timber. Standard method of testing

Bekhta P, Niemz P (2003) Effect of high temperature on the change in color, dimensional stability and mechanical properties of Spruce wood. Holzforschung 57:539–546 CrossRef

ÖNORM B 3012 3012 (1998) Wood species. Characteristics values to terms and symbols of ÖNORM EN 13556 (Holzarten. Kennwerte zu den Benennungen und Kurzzeichen der ÖNORM EN 13556)

DIN 52186 (1978) Testing of wood; bending test (Biegeversuch)

DIN 52189 (1981) Testing of wood; determination of impact bending strength (Schlagbiegeversuch; Bestimmung der Bruchschlagarbeit)

Gerhards CC (1979) Effect of high-temperature drying on tensile strength of Douglas-fir 2 by 4’s. For Prod J 29(3):39–46

Gerhards CC (1983) Effect of high-temperature drying on bending strength of yellow-poplar 2 by 4’s. For Prod J 33(2):61–67

Graham RD (1957) Effect of several drying conditions on strength of coast-type Douglas-fir timbers. For Prod J 7(7):228–233

Green DW (2001) Wood: strength and stiffness. Encyclopedia of materials: science and technology. ISBN: 0-08-0431526, pp 9732–9736

Green DW, Winandy JE, Kretschmann DE (1999) Wood as an engineering material. Wood handbook. Chap. 4: Mechanical properties of wood, pp 1–45

Hansson J, Antti AL (2006) The effect of drying method and temperature level on the hardness of wood. J Mater Process Technol 171:467–470 CrossRef

Källander B, Bengtsson C, Dahlberg J (2001) Reduction of strength but not stiffness of Norway spruce planks dried at 125°C as compared to 70°C. Proceedings 3rd workshop on softwood drying to specific end-uses. Helsinki, 11–13 June

Kollmann FFP, Côté WA (1968) Principles of wood science and technology. Part 1. Solid wood. Springer, Berlin

Oltean L, Teischinger A, Hansmann C (2007) Influence of temperature on cracking and mechanical properties of wood during wood drying—a review. BioResources 2(4):789–811

Salamon M (1965) Effect of high temperature drying on quality and strength of western hemlock. For Prod J 15(3):122–126

Salamon M (1969) High-temperature drying and its effect on wood properties. For Prod J 19(3):27–34

Schneider A (1973) Investigations on the convection drying of lumber at extremely high temperatures. Part II: Drying degrade, changes in sorption, colour and strength of pine sapwood and beechwood at drying temperatures from 110 to 180°C. Holz Roh-Werkst 31:198–206 CrossRef

Sehlstedt-Persson M (1995) High-temperature drying of scots pine. A comparison between HT- and LT-drying. Holz Roh-Werkst 53:95–99 CrossRef

Sehlstedt-Persson M (2005) Properties of solid wood. Responses to drying and heat treatment. Licentiate Thesis Luleå University of Technology Department of Skellefteå Campus Division of Wood Science and Technology. ISSN: 1402-1757, ISRN: LTU-LIC-05/70-SE

Sell J (1989) Eigenschaften und Kenngrössen von Holzarten. Baufachverlag Dietikon AG Zürich. ISBN: 3-85565-223-6, pp 28–34

Simpson WT (1991) Dry kiln operator’s manual. Forest products laboratory agriculture handbook, vol 198. Madison, pp 43–73. Chap. 2: Kiln types and features

Teischinger A (1992) Effect of different drying temperatures on selected physical wood properties. In: Proceedings 3rd IUFRO international wood drying conference. Vienna, Austria, Aug 18–21

Terziev N, Daniel G (2002) Industrial kiln drying and its effect on microstructure, impregnation and properties of Scots pine timber impregnated for above ground use. Holzforschung 56:434–439 CrossRef

Thiam M, Milota MR, Leichti RJ (2002) Effect of high-temperature drying on bending and shear strengths of western hemlock lumber. For Prod J 52(4):64–68

Thompson WS (1969) Effect of steaming and kiln drying on the properties of Southern pine poles. For Prod J 19(1):21–28

Wamming T, Englund F, Sehlstedt-Persson M (1999) Egenskaper hos gran torkad med högtemperatur, del II. En jämförelse med gran torkad med lägtemperatur. Trätek Rapport P9911051 (in Swedish language)

Titel: Influence of low and moderate temperature kiln drying schedules on specific mechanical properties of Norway spruce wood
verfasst von: Laura Oltean
Alfred Teischinger
Christian Hansmann
Publikationsdatum: 01.08.2011
Verlag: Springer-Verlag
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 3/2011
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-010-0467-1

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2011

Surface characteristics and overlaying properties of flat-pressed wood plastic composites

Apparatus for viscoelastic thermal compression of wood

Derivation of the shear strength of continuous beams

Surface roughness evaluation in medium density fibreboard rip sawing

Study of the effect of adding the powder of waste PET bottles and borax pentahydrate to the urea formaldehyde adhesive applied on plywood

Simultaneous veneers incising and lower pressing temperatures—the effect on the plywood pressing time