nach oben

Journal of Materials Engineering and Performance

Erschienen in:

07.11.2018

Tribological Behavior of Solid-State Processed Al-1100/GNP Surface Nanocomposites

verfasst von: Badehish Sahoo, Damanapeta Narsimhachary, Jinu Paul

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Graphene nanoplatelets (GNPs) were infused onto aluminum alloy (Al-1100) surface by a solid-state processing technique to form surface nanocomposites which enrich the mechanical and tribological properties of the aluminum (Al) surface. Electrical resistance heating which locally softens the Al surface, followed by hot pressing, mechanically impregnates and embeds GNPs onto the Al substrate. It was observed that the GNPs mainly occupy the grain boundaries in the matrix during subsequent solidification which leads to strengthening of the matrix through various mechanisms. A detailed tribological study was carried out, and it was found that the wear rate and coefficient of friction decreases by > 85%. Least wear depth in nanoscratch testing was obtained at processing parameters 2200 A and 0.5 s, which could be identified as the optimum current/time combination. The microhardness and Young’s modulus results also show an improvement > 200%, corroborating the tribological studies.

Vorheriger Artikel Correlation Between Structure and Properties of Low-Carbon Cu-Ni-Mo-Ti-Nb Ultrahigh-Strength Steel

Nächster Artikel Application of IR Thermography with Thermal Diffusivity Analysis for Detection of Plies Displacement in CFRP Composites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

M. Kok, Production and Mechanical Properties of Al₂O₃ Particle-Reinforced 2024 Aluminium Alloy Composites, J. Mater. Process. Technol., 2005, 161, p 381–387. https://doi.org/10.1016/j.jmatprotec.2004.07.068 CrossRef

A.T. Alpas and J. Zhang, Effect of SiC Particulate Reinforcement on the Dry Sliding Wear of Aluminium-Silicon Alloys (A356), Wear, 1992, 155, p 83–104. https://doi.org/10.1016/0043-1648(92)90111-K CrossRef

J.C. Walker, W.M. Rainforth, and H. Jones, Lubricated Sliding Wear Behaviour of Aluminium Alloy Composites, Wear, 2005, 259, p 577–589. https://doi.org/10.1016/j.wear.2005.01.001 CrossRef

A.D. Moghadam, B.F. Schultz, J.B. Ferguson, E. Omrani, P.K. Rohatgi, and N. Gupta, Functional Metal Matrix Composites: Self-Lubricating, Self-Healing, and Nanocomposites-An Outlook, JOM, 2014, 66, p 872–881. https://doi.org/10.1007/s11837-014-0948-5 CrossRef

A. Baradeswaran and A.E. Perumal, Wear and Mechanical Characteristics of Al 7075/Graphite Composites, Compos. Part B Eng., 2014, 56, p 472–476. https://doi.org/10.1016/j.compositesb.2013.08.073 CrossRef

A. Sharma, V.M. Sharma, B. Sahoo, J. Joseph, and J. Paul, Study of Nano-Mechanical, Electrochemical and Raman Spectroscopic Behavior of Al6061-SiC-Graphite Hybrid Surface Composite Fabricated through Friction Stir Processing, J. Compos. Sci., 2018, 2(32), p 1–17. https://doi.org/10.3390/jcs2020032 CrossRef

G. Iacob, V.G. Ghica, M. Buzatu, T. Buzatu, and M.I. Petrescu, Studies on Wear Rate and Micro-Hardness of the Al/Al2O3/Gr Hybrid Composites Produced Via Powder Metallurgy, Compos. Part B Eng., 2015, 69, p 603–611. https://doi.org/10.1016/j.compositesb.2014.07.008 CrossRef

A. Sharma, V.M. Sharma, S. Mewar, S.K. Pal, and J. Paul, Friction Stir Processing of Al6061-SiC-Graphite Hybrid Surface Composites, Mater. Manuf. Process., 2018, 33(7), p 795–804. https://doi.org/10.1080/10426914.2017.1401726 CrossRef

M. Kestursatya, J.K. Kim, and P.K. Rohatgi, Wear Performance of Copper-Graphite Composite and a Leaded Copper Alloy, Mater. Sci. Eng. A., 2003, 339, p 150–158. https://doi.org/10.1016/S0921-5093(02)00114-4 CrossRef

10.

Y. Liu, P.K. Rohatgi, and S. Ray, Tribological Characteristics of Aluminum-50 Vol Pct Graphite Composite, Metall. Trans. A., 1993, 24, p 151–159. https://doi.org/10.1007/BF02669612 CrossRef

11.

B. Sahoo, J. Joseph, A. Sharma, and J. Paul, Particle Size and Shape Effects on the Surface Mechanical Properties of Aluminium Coated with Carbonaceous Materials, J. Compos. Mater., 2018, 10, p 15–52. https://doi.org/10.1177/0021998318781932 CrossRef

12.

D. Berman, A. Erdemir, and A.V. Sumant, Graphene: A New Emerging Lubricant, Mater Today, 2014, 17, p 31–42. https://doi.org/10.1016/j.mattod.2013.12.003 CrossRef

13.

A. Nieto, D. Lahiri, and A. Agarwal, Synthesis and Properties of Bulk Graphene Nanoplatelets Consolidated by Spark Plasma Sintering, Carbon N. Y., 2012, 50, p 4068–4077. https://doi.org/10.1016/j.carbon.2012.04.054 CrossRef

14.

W. Choi, I. Lahiri, R. Seelaboyina, and Y.S. Kang, Synthesis of Graphene and Its Applications: A Review, Crit. Rev. Solid State Mater. Sci., 2010, 35, p 52–71. https://doi.org/10.1080/10408430903505036 CrossRef

15.

N.A. Kotov, Materials Science: Carbon Sheet Solutions, Nature, 2006, 442, p 254–255. https://doi.org/10.1038/442254a CrossRef

16.

M. Tabandeh-Khorshid, E. Omrani, P.L. Menezes, and P.K. Rohatgi, Tribological Performance of Self-Lubricating Aluminum Matrix Nanocomposites: Role of Graphene Nanoplatelets, Eng. Sci. Technol. Int. J., 2016, 19, p 463–469. https://doi.org/10.1016/j.jestch.2015.09.005 CrossRef

17.

H.G. Prashantha Kumar, M. Anthony Xavior, Tribological aspects of graphene-aluminum nanocomposites, in Graphene Materials-Structure, Properties and Modifications. In Tech, 2017, p. 75–100. https://doi.org/10.5772/67475.

18.

A. Radha and K.R. Vijayakumar, An Investigation of Mechanical and Wear Properties of AA6061 Reinforced with Silicon Carbide and Graphene Nano Particles-Particulate Composites, Mater. Today Proc., 2016, 3, p 2247–2253. https://doi.org/10.1016/j.matpr.2016.04.133 CrossRef

19.

H.G.P. Kumar and M.A. Xavior, Assessment of Mechanical and Tribological Properties of Al 2024- SiC -Graphene Hybrid Composites, Procedia Eng., 2017, 174, p 992–999. https://doi.org/10.1016/j.proeng.2017.01.251 CrossRef

20.

H.G. Prashantha Kumar and M. Anthony Xavior, Effect of Graphene Addition and Tribological Performance of Al 6061/Graphene Flake Composite, Tribol. Mater. Surf. Interfaces., 2017, 11, p 88–97. https://doi.org/10.1080/17515831.2017.1329920 CrossRef

21.

A. El-Ghazaly, G. Anis, and H.G. Salem, Effect of Graphene Addition on the Mechanical and Tribological Behavior of Nanostructured AA2124 Self-Lubricating Metal Matrix Composite, Compos. Part A Appl. Sci. Manuf., 2017, 95, p 325–336. https://doi.org/10.1016/j.compositesa.2017.02.006 CrossRef

22.

A. Ghazaly, B. Seif, and H.G. Salem, Mechanical and Tribological Properties of AA2124-Graphene Self Lubricating Nanocomposite, Light Met., 2013, 2013, p 411–415. https://doi.org/10.1002/9781118663189.ch71 CrossRef

23.

A. Sharma, S. Sagar, R.P. Mahto, B. Sahoo, S.K. Pal, and J. Paul, Surface Modification of Al6061 by Graphene Impregnation Through a Powder Metallurgy Assisted Friction Surfacing, Surf. Coat. Technol., 2018, 337, p 12–23CrossRef

24.

B. Sahoo, S.D. Girhe, and J. Paul, Influence of Process Parameters and Temperature on the Solid State Fabrication of Multilayered Graphene-Aluminium Surface Nanocomposites, J. Manuf. Proces., 2018, 34, p 486–494CrossRef

25.

Z. Jia, T. Chen, J. Wang, J. Ni, H. Li, and X. Shao, Synthesis, Characterization and Tribological Properties of Cu/Reduced Graphene Oxide Composites, Tribol. Int., 2015, 88, p 17–24. https://doi.org/10.1016/j.triboint.2015.02.028 CrossRef

26.

H. Algul, M. Tokur, S. Ozcan, M. Uysal, T. Cetinkaya, H. Akbulut, and A. Alp, The Effect of Graphene Content and Sliding Speed on the Wear Mechanism of Nickel-Graphene Nanocomposites, Appl. Surf. Sci., 2015, 359, p 340–348. https://doi.org/10.1016/j.apsusc.2015.10.139 CrossRef

27.

M.E. Turan, Y. Sun, Y. Akgul, Y. Turen, and H. Ahlatci, The Effect of GNPs on Wear and Corrosion Behaviors of Pure Magnesium, J. Alloys Compd., 2017, 724, p 14–23. https://doi.org/10.1016/j.jallcom.2017.07.022 CrossRef

28.

M. Uysal, H. Akbulut, M. Tokur, H. Algül, and T. Çetinkaya, Structural and Sliding Wear Properties of Ag/Graphene/WC Hybrid Nanocomposites Produced by Electroless Co-Deposition, J. Alloys Compd., 2016, 654, p 185–195. https://doi.org/10.1016/j.jallcom.2015.08.264 CrossRef

29.

D. Berman, A. Erdemir, and A.V. Sumant, Few Layer Graphene to Reduce Wear and Friction on Sliding Steel Surfaces, Carbon N. Y., 2013, 54, p 454–459. https://doi.org/10.1016/j.carbon.2012.11.061 CrossRef

30.

M. Belmonte, C. Ramírez, J. González-Julián, J. Schneider, P. Miranzo, and M.I. Osendi, The Beneficial Effect of Graphene Nanofillers on the Tribological Performance of Ceramics, Carbon N. Y., 2013, 61, p 431–435. https://doi.org/10.1016/j.carbon.2013.04.102 CrossRef

31.

C. Lee, X. Wei, J.W. Kysar, and J. Hone, Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene, Science, 2008, 321(80), p 385–388. https://doi.org/10.1126/science.1157996 CrossRef

32.

B. Sahoo, R. Kumar, J. Joseph, A. Sharma, and J. Paul, Preparation of Aluminium 6063-Graphite Surface Composites by an Electrical Resistance Heat Assisted Pressing Technique, Surf. Coat. Technol., 2017, 309, p 563–572. https://doi.org/10.1016/j.surfcoat.2016.12.011 CrossRef

33.

B. Sahoo, J. Joseph, A. Sharma, and J. Paul, Surface Modification of Aluminium by Graphene Impregnation, Mater. Des., 2017, 116, p 51–64. https://doi.org/10.1016/j.matdes.2016.11.075 CrossRef

34.

H.C. Schniepp, J.L. Li, M.J. McAllister, H. Sai, M. Herrera-Alonso, D.H. Adamson, R.K. Prud’homme, R. Car, D.A. Saville, and I.A. Aksay, Functionalized Single Graphene Sheets Derived from Splitting Graphite Oxide, J. Phys. Chem. B., 2006, 110, p 8535–8539. https://doi.org/10.1021/jp060936f CrossRef

35.

G. Ouyang, W.G. Zhu, C.Q. Sun, Z.M. Zhu, and S.Z. Liao, Atomistic Origin of Lattice Strain on Stiffness of Nanoparticles, Phys. Chem. Chem. Phys., 2010, 12, p 1543–1549. https://doi.org/10.1039/b919982a CrossRef

36.

T.M.G. Mohiuddin, A. Lombardo, R.R. Nair, A. Bonetti, G. Savini, R. Jalil, N. Bonini, D.M. Basko, C. Galiotis, N. Marzari, K.S. Novoselov, A.K. Geim, and A.C. Ferrari, Uniaxial Strain in Graphene by Raman Spectroscopy: G Peak Splitting, Grüneisen Parameters, and Sample Orientation, Phys. Rev. B Condens. Matter Mater. Phys., 2009, 79, p 1–8. https://doi.org/10.1103/physrevb.79.205433 CrossRef

37.

W. Tian, S. Li, B. Wang, X. Chen, J. Liu, and M. Yu, Graphene-Reinforced Aluminum Matrix Composites Prepared by Spark Plasma Sintering, Int. J. Miner. Metall. Mater., 2016, 23, p 723–729. https://doi.org/10.1007/s12613-016-1286-0 CrossRef

38.

D. Yang, A. Velamakanni, G. Bozoklu, S. Park, M. Stoller, R.D. Piner, S. Stankovich, I. Jung, D.A. Field, C.A. Ventrice, and R.S. Ruoff, Chemical Analysis of Graphene Oxide Films After Heat and Chemical Treatments by X-ray Photoelectron and Micro-Raman Spectroscopy, Carbon N. Y., 2009, 47, p 145–152. https://doi.org/10.1016/j.carbon.2008.09.045 CrossRef

39.

A. Fadavi Boostani, S. Yazdani, R. Taherzadeh Mousavian, S. Tahamtan, R. Azari Khosroshahi, D. Wei, D. Brabazon, J.Z.Z. Xu, X.M.M. Zhang, and Z.Y.Y. Jiang, Strengthening Mechanisms of Graphene Sheets in Aluminium Matrix Nanocomposites, Mater. Des., 2015, 88, p 983–989. https://doi.org/10.1016/j.matdes.2015.09.063 CrossRef

40.

M. Kestursatya, J.K. Kim, and P.K. Rohatgi, Friction and Wear Behavior of a Centrifugally Cast Lead-Free Copper Alloy Containing Graphite Particles, Metall. Mater. Trans. A, 2001, 32, p 2115–2125. https://doi.org/10.1007/s11661-001-0023-z CrossRef

41.

Y. Imada and K. Nakajima, Effect of Humidity on the Friction and Wear Properties of Sn, J Tribol, 1995, 117, p 737. https://doi.org/10.1115/1.2831545 CrossRef

42.

M. Jafari, M.H. Enayati, M.H. Abbasi, and F. Karimzadeh, Compressive and Wear Behaviors of Bulk Nanostructured Al2024 Alloy, Mater. Des., 2010, 31, p 663–669. https://doi.org/10.1016/j.matdes.2009.08.020 CrossRef

43.

N.P. Suh, The Delamination Theory of Wear, Wear, 1973, 25, p 111–124. https://doi.org/10.1016/0043-1648(73)90125-7 CrossRef

44.

W. Zhai, X. Shi, M. Wang, Z. Xu, J. Yao, S. Song, Y. Wang, and Q. Zhang, Effect of Graphene Nanoplate Addition on the Tribological Performance of Ni 3 Al Matrix Composites, J. Compos. Mater., 2014, 48, p 3727–3733. https://doi.org/10.1177/0021998313513048 CrossRef

45.

P.L. Menezes, Kishore, and S.V. Kailas, Studies On Friction And Transfer Layer Using Inclined Scratch (2006), pp. 262–279. https://doi.org/10.1016/s0167-8922(06)80050-7

46.

M. Kostecki, J. Woźniak, T. Cygan, M. Petrus, and A. Olszyna, Tribological Properties of Aluminium Alloy Composites Reinforced with Multi-Layer Graphene-The Influence of Spark Plasma Texturing Process, Materials (Basel)., 2017, 10, p 928. https://doi.org/10.3390/ma10080928 CrossRef

47.

M.W. Iqbal, A.K. Singh, M.Z. Iqbal, and J. Eom, Raman Fingerprint of Doping Due to Metal Adsorbates on Graphene, J. Phys. Condens. Matter., 2012, 24, p 335301. https://doi.org/10.1088/0953-8984/24/33/335301 CrossRef

48.

G. Tsoukleri, J. Parthenios, K. Papagelis, R. Jalil, A.C. Ferrari, A.K. Geim, K.S. Novoselov, and C. Galiotis, Subjecting a Graphene Monolayer to Tension and Compression, Small, 2009, 5, p 2397–2402. https://doi.org/10.1002/smll.200900802 CrossRef

49.

J.F. Li, L. Zhang, J.K. Xiao, and K.C. Zhou, Sliding Wear Behavior of Copper-Based Composites Reinforced with Graphene Nanosheets and Graphite, Trans. Nonferrous Met. Soc. China (Engl. Ed.), 2015, 25, p 3354–3362. https://doi.org/10.1016/s1003-6326(15)63970-x CrossRef

50.

M.M. Shokrieh, M.R. Hosseinkhani, M.R. Naimi-Jamal, and H. Tourani, Nanoindentation and Nanoscratch Investigations on Graphene-Based Nanocomposites, Polym. Test., 2013, 32, p 45–51. https://doi.org/10.1016/j.polymertesting.2012.09.001 CrossRef

Titel: Tribological Behavior of Solid-State Processed Al-1100/GNP Surface Nanocomposites
verfasst von: Badehish Sahoo
Damanapeta Narsimhachary
Jinu Paul
Publikationsdatum: 07.11.2018
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2018
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3727-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2018

Effect of Ni Addition to Sn0.7Cu Solder Alloy on Thermal Behavior, Microstructure, and Mechanical Properties

Wear-Resistant Al/SiC-Gr Hybrid Metal Matrix Composite Fabricated by Multiple Annealing and Roll Bonding

Hydrogen Effect on the Fatigue Crack Growth in Austenitic Stainless Steel Investigated by a New Method Based on Nanohardness Distribution

Corrosion Behavior of Smy(FexNi1−x)4Sb12 (0.40 ≤ x ≤ 0.80) in NaCl Solutions Studied by Electron Microscopy and ICP-AES

GUEST EDITORIAL

Investigation of Current Parameters and Size Effects on Mechanical Properties During Pulsed Electrically Assisted Uniaxial Tension in T2 Red Copper Sheets

Premium Partner

Marktübersichten