Ausgabe 12/2018
Special Issue Focus: GiTE 2018, Thermoelectricity Days
Inhalt (56 Artikel)
GUEST EDITORIAL
Cristina Artini, Riccardo Carlini, Paolo Mele, Dario Narducci, Marcella Pani, Ilaria Pallecchi
Formation and Decomposition Process of the Filled Skutterudite Smy(FexNi1−x)4Sb12 (0.40 ≤ x ≤ 1) as Revealed by Differential Thermal Analysis
C. Artini, N. Parodi, G. Latronico, R. Carlini
Corrosion Behavior of Smy(FexNi1−x)4Sb12 (0.40 ≤ x ≤ 0.80) in NaCl Solutions Studied by Electron Microscopy and ICP-AES
Riccardo Carlini, Nadia Parodi, Francesco Soggia, Giovanna Latronico, Maria Maddalena Carnasciali, Cristina Artini
Fabrication of Silicon Nanowire Forests for Thermoelectric Applications by Metal-Assisted Chemical Etching
Elisabetta Dimaggio, Dario Narducci, Giovanni Pennelli
Effect of Oxygen Pressure on Thermoelectric Properties of p-Type CuAlO2 Films Fabricated by Pulsed Laser Deposition
Shrikant Saini, Paolo Mele, Shunsuke Osugi, Malik I. Adam
Experimental Determination of Power Losses and Heat Generation in Solar Cells for Photovoltaic-Thermal Applications
Bruno Lorenzi, Maurizio Acciarri, Dario Narducci
Suspended InAs Nanowire-Based Devices for Thermal Conductivity Measurement Using the 3ω Method
Mirko Rocci, Valeria Demontis, Domenic Prete, Daniele Ercolani, Lucia Sorba, Fabio Beltram, Giovanni Pennelli, Stefano Roddaro, Francesco Rossella
Thermoelectric Properties of TiNiSn Half Heusler Alloy Obtained by Rapid Solidification and Sintering
Francesco Aversano, Alberto Ferrario, Stefano Boldrini, Carlo Fanciulli, Marcello Baricco, Alberto Castellero
Synthesis and Structural Characterization of Sb-Doped TiFe2Sn Heusler Compounds
M. Pani, I. Pallecchi, C. Bernini, N. Ardoino, D. Marré
Local Structure Around Nb Site of a Potential Thermoelectric Material La1/3NbO3 from Temperature-Dependent Extended x-ray Absorption Fine Structure Spectroscopy
Carlo Marini, Anna M. Diaz-Rovira, B. J. Kennedy, Boby Joseph
Alternative PWHT to Improve High-Temperature Mechanical Properties of Advanced 9Cr Steel Welds
Ariel Burgos, Hernán Svoboda, Zhuyao Zhang, Estela Surian
The Effects of Heat Treatment on Microstructure and Mechanical Properties of Tribaloy 400 Coatings Deposited by Laser Cladding
Junbo Lin, Changjun Chen, Min Zhang, Shunquan Wang
The Effects of Alloying Elements on the Continuous Cooling Transformation Behavior of 2¼Cr-1Mo Steels
John M. Tartaglia, Alison N. Kuelz, Veronica Hatty Thelander
Protective Properties of Aluminum Nitride Coatings by DC-PVD Sputtering on Cu-10Al-13Mn Shape Memory Alloy
Mirali Seyed Shariatdoust, Hossein Aghajani
Experimental Investigations to Study the Effects of Microwave Treatment Strategy on Tool Performance in Turning Operation
Durwesh Jhodkar, M. Amarnath, H. Chelladurai, J. Ramkumar
Welding Heat Input Influence on UNS S82441 Lean Duplex Stainless Steel Corrosion Resistance Assessed by Scanning Vibrating Electrode Technique (SVET)
Evandro Armini de Pauli, Fernando Cotting, Jaime Casanova Soeiro Junior, Idalina Vieira Aoki, Sérgio Duarte Brandi
Microstructure and Phase Composition of Ni-Based Alloy Obtained by High-Speed Direct Laser Deposition
Mariia Rashkovets, Aelita Nikulina, Gleb Turichin, Olga Klimova-Korsmik, Marina Sklyar
In Steam Short-Time Oxidation Kinetics of FeCrAl Alloys
Dong Pan, Ruiqian Zhang, Haijun Wang, Yu Xu, Hui Wang
On the Steel–Aluminum Hybrid Casting by Sand Casting
Xiangfan Fang, Joachim Gundlach, Jannis-Jeremias Schipperges, Xin Jiang
Characterization of Static Recrystallization of a Ni-Cr-Mo-Based C276 Superalloy in Two-Stage Isothermal Compression
Chi Zhang, Liwen Zhang, Yan Cui, Yinlin Gu
Formability, Microstructure and Mechanical Properties of Flow-Formed 17-4 PH Stainless Steel
P. Maj, B. Adamczyk-Cieslak, M. Lewczuk, J. Mizera, S. Kut, T. Mrugala
Enhancement of Hot Corrosion Resistance of Modified 9Cr-1Mo Steel Through Surface Nanostructuring and Pre-oxidation
Divya Sri Bandla, Preeti Verma, Kausik Chattopadhyay, Vakil Singh
Effect of Dynamic Strain Aging on Tensile Deformation of 20MnMoNi55 Alloy
Mrinmoy Jana, Sankar Dhar, Sanjib Kumar Acharyya, Jayanta Chattopadhyay
Stability of Phase Transformation Temperatures During Cycling of Ti-15.8Nb-4.94Al-0.06Sc Shape Memory Alloy
B. Sun, X. L. Meng, Z. Y. Gao, W. Cai
Hydrogen Effect on the Fatigue Crack Growth in Austenitic Stainless Steel Investigated by a New Method Based on Nanohardness Distribution
Huimin Tao, Yuanjian Hong, Xingyang Chen, Chengshuang Zhou, Jinyang Zheng, Lin Zhang
Investigation of Current Parameters and Size Effects on Mechanical Properties During Pulsed Electrically Assisted Uniaxial Tension in T2 Red Copper Sheets
Saijun Zhang, Yanchun Lu, Xiaolong Gong, Zhaohui Shen
Effect of Scale Spallation During Coiling on the Electrochemical and Pickling Behavior of a Hot-Rolled Dual-Phase Steel
S. Choudhary, K. Mondal, S. Mukherjee, Sundara Bharathy R.
Correlation Between Structure and Properties of Low-Carbon Cu-Ni-Mo-Ti-Nb Ultrahigh-Strength Steel
G. Mandal, S. K. Ghosh, D. Chakrabarti, S. Chatterjee
Tribological Behavior of Solid-State Processed Al-1100/GNP Surface Nanocomposites
Badehish Sahoo, Damanapeta Narsimhachary, Jinu Paul
Effect of Lithium on the Discharge and Corrosion Behavior of Mg-3 wt.% Al Alloy as the Anode for Seawater Activated Battery
Ri-chu Wang, Qi Li, Nai-guang Wang, Chao-qun Peng, Yan Feng
Effect of Ni Addition to Sn0.7Cu Solder Alloy on Thermal Behavior, Microstructure, and Mechanical Properties
Yanqing Lai, Xiaowu Hu, Xiongxin Jiang, Yulong Li
Investigation on Fracture Behavior of Grade 91 Steel at 300-550 °C
B. Shashank Dutt, M. Nani Babu, G. Shanthi, A. Moitra, G. Sasikala
Investigation on Mechanical Properties and Equivalent Model of Aluminum Honeycomb Sandwich Panels
Liangcai Cai, Duoyao Zhang, Shaohui Zhou, Wei Xu
Effect of Strain Rate on the Plastic Deformation and Fracture of 90W-7Ni-3Fe Alloy Prepared by Liquid-Phase Sintering
Yang Yu, Ming Zu, Chaoyuan Ren, Wencong Zhang
Tribological Behavior of Electrochemically Etched AISI 316 Stainless Steel with a Textured Surface
Naiming Lin, Dali Li, Jiaojuan Zou, Junwen Guo, Shuo Yuan, Zhihua Wang, Bin Tang
High-Temperature Low-Cycle Fatigue Behavior of HS80H Ferritic–Martensitic Steel Under Dynamic Strain Aging
Wenlan Wei, Yaorong Feng, Lihong Han, Jianxun Zhang, Hang Wang
The Effect of Flowing Velocity and Impact Angle on the Fluid-Accelerated Corrosion of X65 Pipeline Steel in a Wet Gas Environment Containing CO2
Yong Li, Jiankuan Li, Kejun Wang, Longfei Song, Cuiwei Du, Renyang He
A Low-Cost Lightweight Entropic Alloy with High Strength
Lei Shao, Tao Zhang, Lugee Li, Yuhong Zhao, Jinfeng Huang, Peter K. Liaw, Yong Zhang
Microstructure and Tensile Properties of the Fe-32%Ni-4%Co Alloy During Cryorolling and Subsequent Annealing
Changsheng Li, Jianjun Zheng, Shuai He, Ban Cai, Yanlei Song
Microstructure Evolution and Microhardness Distribution of Copper Processed Using Multiple Passes of Elliptical Cross-Sectional Spiral Equal-Channel Extrusion
Chengpeng Wang, Daiwang Song, Junkai Fan, Fuguo Li
Wear-Resistant Al/SiC-Gr Hybrid Metal Matrix Composite Fabricated by Multiple Annealing and Roll Bonding
M. Reihanian, A. Baharloo, S. M. Lari Baghal
Achieving Grain Refinement and Related Mechanical Property Improvement of an Al-Zn-Mg-Cu Alloy Through Severe Plastic Deformation
Jinghui Li, Fuguo Li, Wenjing Wang, Xinkai Ma, Jiang Li
The Improved Thermal Conductivity of a Potting Material for High-Power Fast Warm-Up Cathodes
Xiaodong Zhang, Junjie Hao, Zhimeng Guo, Zhenhui Ji, Ji Luo, Cunguang Chen, Fang Yang, Alex A. Volinsky
Microstructure and Mechanical Properties of Friction Stir Welded Q235 Low-Carbon Steel
L. Zhou, R. X. Zhang, H. F. Yang, Y. X. Huang, X. G. Song
Interfacial Characteristics Investigation for One-Step EDM Drilling of Cooling Holes in TBCs
Li Wang, Guanxin Chi, Lan Chen, Yongfeng Guo
Effect of Deposition Pressure, Nitrogen Content and Substrate Temperature on Optical and Mechanical Behavior of Nanocomposite Al-Si-N Hard Coatings for Solar Thermal Applications
Soni, Swati Kumari, S. K. Sharma, S. K. Mishra
Processing and Properties of CNTs/ADC12 Nanocomposite
Zhifan Wei, Hong Yan, Zhixiang Huang, Qingjie Wu, Yongcheng Zou
Role of Precipitates in Recrystallization Mechanisms of Nb-Mo Microalloyed Steel
Gopi K. Mandal, Siddhartha S. Das, Tipu Kumar, Ashok Kamaraj, K. Mondal, V. C. Srivastava
Effect of Annealing on the Microstructure and Properties of Electron Beam Welded 4J34 Kovar Alloy
Guoqing Chen, Ge Zhang, Xi Shu, Binggang Zhang, Jian Li, Jicai Feng
On the Hot Deformation Behavior of a Ni-Free Austenitic Stainless Steel Interstitially Alloyed with Low Nitrogen Content
H. Khorshidi, A. Kermanpur, M. C. Somani, A. Najafizadeh
Influence of Local Inhomogeneity of Thermomechanical Treatment Conditions on Microstructure Evolution in Aluminum Alloys
Evgenii Aryshenskii, Jürgen Hirsch, Vasilii Yashin, Konovalov Sergei, Rudolf Kawalla
Correction to: Formation of Al/(Al13Fe4 + Al2O3) Nano-composites via Mechanical Alloying and Friction Stir Processing
Ghasem Azimi-Roeen, Seyed Farshid Kashani-Bozorg, Martin Nosko, Štefan Nagy, Igor Maťko