nach oben

Lasers in Manufacturing and Materials Processing

Erschienen in:

07.01.2022

Physicochemical Properties of Nanofluids Produced from Oxidized Nanoparticles Synthesized in a Liquid by Pulsed Laser Ablation

verfasst von: Tahani Flemban, Ridha Hamdi, Hassan Alkhabbaz, Muidh Alheshibri, Sultan Akhtar, Noureddine Ouerfelli, Khaled Elsayed

Erschienen in: Lasers in Manufacturing and Materials Processing | Ausgabe 1/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Since pulsed laser ablation in liquid is the most common, simple, and efficient technique to synthesize nanoparticles (NPs). In this work, pure aluminum (Al) and pure copper (Cu) targets are located inside a liquid ambient, next a Nd-YAG Laser of 1064 nm wavelength and 10 Hz pulse repetition is used at four different pulse energies of 30, 50, 70, and 90 mJ to produce Al-NPs and Cu-NPs. After that, a comparative/superlative study, and the physicochemical properties of the prepared nanofluids, (Al-NFs) and (Cu-NFs), have been carried out using transmission electron microscope, scanning electron microscopy with energy-dispersive X-ray spectroscopy, zeta-sizer, UV-Vis spectroscopy, density meter, and viscometer. The influence of laser energy on these properties have been investigated as well.

Vorheriger Artikel Parameters Development for Optimum Deposition Rate in Laser DMD of Stainless Steel EN X3CrNiMo13-4

Nächster Artikel Laser Welding of Titanium Grade 2 and Aluminium AA 3105-O Using a New AlScZr Filler Metal

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Shih, C.-Y., Shugaev, M.V., Wu, C., Zhigilei, L.V.: The effect of pulse duration on nanoparticle generation in pulsed laser ablation in liquids: insights from large-scale atomistic simulations. Phys. Chem. Chem. Phys. 22, 7077–7099 (2020). https://doi.org/10.1039/D0CP00608DCrossRef

Al-Kattan, A., Grojo, D., Drouet, C., Mouskeftaras, A., Delaporte, P., Casanova, A., Robin, J.D., Magdinier, F., Alloncle, P., Constantinescu, C., Motto-Ros, V., Hermann, J.: Short-Pulse Lasers: A Versatile Tool in Creating Novel Nano-/Micro-Structures and Compositional Analysis for Healthcare and Wellbeing Challenges. Nanomaterials. 11, 712 (2021). https://doi.org/10.3390/nano11030712CrossRef

Khashan, K.S., Badr, B.A., Sulaiman, G.M., Jabir, M.S., Hussain, S.A.: Antibacterial activity of Zinc Oxide nanostructured materials synthesis by laser ablation method. In: Journal of Physics: Conference Series. p. 12040. IOP Publishing Ltd (2021)

Abed, M.A., Mutlak, F.A.H., Ahmed, A.F., Nayef, U.M., Abdulridha, S.K., Jabir, M.S.: Synthesis of Ag/Au (core/shell) nanoparticles by laser ablation in liquid and study of their toxicity on blood human components. In: Journal of Physics: Conference Series. p. 12013. IOP Publishing Ltd (2021)

Shimohira, T., Katagiri, S., Ohsugi, Y., Hirota, T., Hatasa, M., Mizutani, K., Watanabe, K., Niimi, H., Iwata, T., Aoki, A.: Comprehensive and Sequential Gene Expression Analysis of Bone Healing Process Following Er:YAG Laser Ablation. Photobiomodulation Photomed. Laser Surg. 39, 100–112 (2021). https://doi.org/10.1089/photob.2020.4833CrossRef

DUDEJA, J.P.: Laser Technology for Analysis. Cleaning and Restoration of Ancient Painted Artworks. Lasers Eng. 48, 1–15 (2021)

Bäuerle, D.W.: Laser Processing and Chemistry. Springer, Berlin Heidelberg, New York (2000)CrossRef

Bäuerle, D.: Laser chemical processing: an overview to the 30th anniversary. Appl Phys A. 101, 447-459-447–459 (2010)

Rafique, M., Rafique, M.S., Butt, S.H., Kalsoom, U., Afzal, A., Anjum, S., Usman, A.: Dependence of the structural optical and thermo-physical properties of gold nano-particles synthesized by laser ablation method on the nature of laser. Optik. 134, 140–148 (2017). https://doi.org/10.1016/j.ijleo.2017.01.015CrossRef

10.

Rafique, M., Rafique, M.S., Butt, S.H., Afzal, A., Kalsoom, U.: Laser nature dependence on enhancement of optical and thermal properties of copper oxide nanofluids. Appl. Surf. Sci. 483, 187–193 (2019). https://doi.org/10.1016/j.apsusc.2019.03.306CrossRef

11.

Rafique, M., Rafique, M.S., Kalsoom, U., Afzal, A., Butt, S.H., Usman, A.: Laser ablation synthesis of silver nanoparticles in water and dependence on laser nature. Opt. Quantum Electron. 51, 179 (2019). https://doi.org/10.1007/s11082-019-1902-0CrossRef

12.

Gondal, M.A., Qahtan, T.F., Dastageer, M.A., Saleh, T.A., Maganda, Y.W., Anjum, D.H.: Effects of oxidizing medium on the composition, morphology and optical properties of copper oxide nanoparticles produced by pulsed laser ablation. Appl. Surf. Sci. 286, 149–155 (2013). https://doi.org/10.1016/j.apsusc.2013.09.038CrossRef

13.

Takada, N., Sasaki, T., Sasaki, K.: Synthesis of crystalline TiN and Si particles by laser ablation in liquid nitrogen. Appl. Phys. Mater. Sci. Process. 93, 833–836 (2008). https://doi.org/10.1007/s00339-008-4748-zCrossRef

14.

Semaltianos, N.G., Logothetidis, S., Perrie, W., Romani, S., Potter, R.J., Sharp, M., French, P., Dearden, G., Watkins, K.G.: II-VI semiconductor nanoparticles synthesized by laser ablation. Appl. Phys. Mater. Sci. Process. 94, 641–647 (2009). https://doi.org/10.1007/s00339-008-4854-yCrossRef

15.

Elaboudi, I., Lazare, S., Belin, C., Talaga, D., Labrugère, C.: From polymer films to organic nanoparticles suspensions by means of excimer laser ablation in water. Appl. Phys. Mater. Sci. Process. 93, 827–831 (2008). https://doi.org/10.1007/s00339-008-4746-1CrossRef

16.

Liu, B., Hu, Z., Che, Y., Chen, Y., Pan, X.: Nanoparticle generation in ultrafast pulsed laser ablation of nickel. Appl. Phys. Lett. 90, 044103 (2007). https://doi.org/10.1063/1.2434168CrossRef

17.

Eid, E.I., Al-Nagdy, A.A., Khalaf-Allah, R.A.: Nucleate pool boiling heat transfer above laser machining heating surfaces with different micro-cavity geometric shape for water-aluminum oxide nanofluid. Exp. Heat Transf. 1–20 (2021). doi: 10.1080/08916152.2021.1946207

18.

Riahi, A., Khamlich, S., Balghouthi, M., Khamliche, T., Doyle, T.B., Dimassi, W., Guizani, A., Maaza, M.: Study of thermal conductivity of synthesized Al2O3-water nanofluid by pulsed laser ablation in liquid. J. Mol. Liq. 304, 112694 (2020). https://doi.org/10.1016/j.molliq.2020.112694CrossRef

19.

Khamliche, T., Khamlich, S., Moodley, M.K., Mothudi, B.M., Henini, M., Maaza, M.: Laser fabrication of Cu nanoparticles based nanofluid with enhanced thermal conductivity: Experimental and molecular dynamics studies. J. Mol. Liq. 323, 114975 (2021). https://doi.org/10.1016/j.molliq.2020.114975CrossRef

20.

Elsayed, K.A., Imam, H., Ahmed, M.A., Ramadan, R.: Effect of focusing conditions and laser parameters on the fabrication of gold nanoparticles via laser ablation in liquid. Opt. Laser Technol. 45, 495–502 (2013). https://doi.org/10.1016/j.optlastec.2012.06.004CrossRef

21.

Semaltianos, N.G.: Nanoparticles by laser ablation. Crit. Rev. Solid State Mater. Sci. 35, 105–124 (2010). https://doi.org/10.1080/10408431003788233CrossRef

22.

Phuoc, T.X., Soong, Y., Chyu, M.K.: Synthesis of Ag-deionized water nanofluids using multi-beam laser ablation in liquids. Opt. Lasers Eng. 45, 1099–1106 (2007). https://doi.org/10.1016/j.optlaseng.2007.06.005CrossRef

23.

Zhou, W., Wang, Z.: Scanning microscopy for nanotechnology: techniques and applications. (2007)

24.

Goldstein, J., Newbury, D., Michael, J., Ritchie, N.: Scanning electron microscopy and X-ray microanalysis. (2017)

25.

Ghadimi, A., Saidur, R., Metselaar, H.S.C.: A review of nanofluid stability properties and characterization in stationary conditions. Int. J. Heat Mass Transf. 54, 4051–4068 (2011). https://doi.org/10.1016/j.ijheatmasstransfer.2011.04.014CrossRef

26.

Ruan, B., Jacobi, A.M.: Ultrasonication effects on thermal and rheological properties of carbon nanotube suspensions. Nanoscale Res. Lett. 7, 127 (2012). https://doi.org/10.1186/1556-276X-7-127CrossRef

27.

Müller, R.H.: Zetapotential und Partikelladung in der Laborpraxis. Wissenschaftliche Verlagsgesellschaft, Stuttgart (1996)

28.

Bera, B.: Nanoporous Silicon Prepared by Vapour Phase Strain Etch and Sacrificial Technique. Int. J. Comput. Appl. Micro, 42–45 (2015)

29.

Hyder, A.A.A.K.N. and S.: Ion-Solvent Interaction of Sodium Iodide and Lithium Nitrate in N,N-Dimethylformamide + Ethanol Mixtures at Various Temperatures. J. Indian Chem. Soc. 75, 501–505 (1998)

30.

Eyring H., J.M.S.: Significant Liquid Structure. John Wiley & Sons, Inc. New York, NY (1969)

31.

Jones, G., Dole, M.: The viscosity of aqueous solutions of strong electrolytes with special reference to barium chloride. J. Am. Chem. Soc. 51, 2950–2964 (1929). https://doi.org/10.1021/ja01385a012CrossRef

32.

Lorenz, W.: Theorie der Elektrolyte Von H. Falkenhagen unter Mitwirkung von W. Ebeling, mit einem Anhang (“Magnetische Kernresonanzuntersuchungen zur Struktur von Elektrolytlösungen”) von H. G. Hertz; S. Hirzel Verlag, Leipzig, 1971; 560 Seiten mit 142 Bildern und 90. Z. Für Chem. 12, 239–239 (2010). doi: 10.1002/zfch.19720120622

33.

Messaâdi, A., Ouerfelli, N., Das, D., Hamda, H., Hamzaoui, A.H.: Correspondence between Grunberg-Nissan, Arrhenius and Jouyban-Acree parameters for viscosity of isobutyric acid + water binary mixtures from 302.15 to 313.15 K. J. Solut. Chem. 41, 2186–2208 (2012). doi: 10.1007/s10953-012-9931-3

34.

Das, D., Ouerfelli, N.: The relative reduced redlich-kister and herráez equations for correlating excess properties of N,N-dimethylacetamide + formamide binary mixtures at temperatures from 298.15 K to 318.15 K. J. Solut. Chem. 41, 1334–1351 (2012). doi: 10.1007/s10953-012-9878-4

35.

Ouerfelli, N., Iulian, O., Besbes, R., Barhoumi, Z., Amdouni, N.: On the validity of the correlation - Belda equation for some physical and chemical properties in 1,4-dioxane + water mixtures. Phys. Chem. Liq. 50, 54–68 (2012). https://doi.org/10.1080/00319104.2010.494246CrossRef

36.

Ouerfelli, N., Bouanz, M.: Excess molar volume and viscosity of isobutyric acid + water binary mixtures near and far away from the critical temperature. J. Solut. Chem. 35, 121–137 (2006). https://doi.org/10.1007/s10953-006-8944-1CrossRef

37.

Viswanath, D.S., Natavajan, G.: Data book on the viscosity of liquids, (1989)

38.

Viswanath, D.S., Ghosh, T., Prasad, D.H.L., Dutt, N.V.K., Rani, K.Y.: Viscosity of Liquids: Theory. Estimation, Experiment, and Data. Springer (2007)MATH

39.

Messaâdi, A., Dhouibi, N., Hamda, H., Belgacem, F.B.M., Adbelkader, Y.H., Ouerfelli, N., Hamzaoui, A.H.: A New Equation Relating the Viscosity Arrhenius Temperature and the Activation Energy for Some Newtonian Classical Solvents. J. Chem. 2015, (2015). https://doi.org/10.1155/2015/163262

40.

Haj-Kacem, R.B., Ouerfelli, N., Herráez, J.V., Guettari, M., Hamda, H., Dallel, M.: Contribution to modeling the viscosity Arrhenius-type equation for some solvents by statistical correlations analysis. Fluid Phase Equilibria. 383, 11–20 (2014). https://doi.org/10.1016/j.fluid.2014.09.023CrossRef

41.

Hamdi, R., Massoudi, I., Alotaibi, D.H., Ouerfelli, N.: Novel linear/nonlinear dependence between the Viscosity Arrhenius parameters correlation in Newtonian liquids. Chem. Phys. 542, 111076 (2021). https://doi.org/10.1016/j.chemphys.2020.111076CrossRef

42.

Yu, W., Xie, H.: A review on nanofluids: Preparation, stability mechanisms, and applications, (2012)

43.

Yao, S., Teng, Z.: Effect of Nanofluids on Boiling Heat Transfer Performance. Appl. Sci. 9, 2818 (2019). https://doi.org/10.3390/app9142818CrossRef

44.

Bhuiyan, M.H.U., Saidur, R., Amalina, M.A., Mostafizur, R.M., Islam, A.K.M.S.: Effect of nanoparticles concentration and their sizes on surface tension of nanofluids. In: Procedia Engineering. pp. 431–437. Elsevier Ltd (2015)

45.

Bejaoui, F., Salas, J.J., Nouairi, I., Smaoui, A., Abdelly, C., Martínez-Force, E., Youssef, N.: Ben: Changes in chloroplast lipid contents and chloroplast ultrastructure in Sulla carnosa and Sulla coronaria leaves under salt stress. J. Plant Physiol. 198, 32–38 (2016). https://doi.org/10.1016/j.jplph.2016.03.018CrossRef

Titel: Physicochemical Properties of Nanofluids Produced from Oxidized Nanoparticles Synthesized in a Liquid by Pulsed Laser Ablation
verfasst von: Tahani Flemban
Ridha Hamdi
Hassan Alkhabbaz
Muidh Alheshibri
Sultan Akhtar
Noureddine Ouerfelli
Khaled Elsayed
Publikationsdatum: 07.01.2022
Verlag: Springer US
Erschienen in: Lasers in Manufacturing and Materials Processing / Ausgabe 1/2022
Print ISSN: 2196-7229
Elektronische ISSN: 2196-7237
DOI: https://doi.org/10.1007/s40516-021-00160-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2022

Nanonetworks fabrication by laser ablation in water of bimetallic compositions of platinum and palladium with gold and silver

Parameters Development for Optimum Deposition Rate in Laser DMD of Stainless Steel EN X3CrNiMo13-4

Machinability Analysis During Laser Assisted Turning of Aluminium 3003 Alloy

Laser Welding of Titanium Grade 2 and Aluminium AA 3105-O Using a New AlScZr Filler Metal

Fabrication of Thin Walls with and without Close Loop Control as a Function of Scan Strategy Via Direct Energy Deposition

Crown Glass Drilling by Short-Pulse CO2 Laser with Tunable Pulse Tail

Premium Partner

Marktübersichten