nach oben

Journal of Materials Engineering and Performance

Erschienen in:

15.03.2022 | Technical Article

Sliding Friction and Wear Properties of GCr15 Steel under Different Lubrication Conditions

verfasst von: Tiantian He, Gaoang Song, Ruonan Shao, Sanming Du, Yongzhen Zhang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 9/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The tribological performance of GCr15 bearing steel under different lubrication conditions was investigated. The results showed that from lean lubrication to dry friction the tribological properties of GCr15 bearing steel change sharply and the wear mechanism transforms from abrasive wear to the mixture of adhesive wear and oxidation wear. Meanwhile, the thickness of the severe plastic deformation layer increases from lean lubrication to dry friction. The retained austenite transforms into the martensite on the worn surface and the residual compressive stress increases. The variation rate of friction coefficient (f′) and the time of the transition zone (△t) are proposed as the indicators of bearing early failure under unsteady lubrication, which are closely related to service conditions.

Vorheriger Artikel Microstructure, Tribological, and Electrochemical Characterization of Hardfacing WC-Ni-Cr on AISI 1045 Carbon Steel Alloy

Nächster Artikel Development of a Modified Gurson–Tvergaard–Needleman Damage Model Characterizing the Strain-Rate-Dependent Behavior of 6061-T5 Aluminum Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

R. Bassani, Hydrostatic Self-Regulating Multipad Journal and Integral Bearings, Tribol. Trans., 2013, 56, p 187–195. CrossRef

J. Bijwe, W. Hufenbach, K. Kunze and A. Langkamp, Polymer Composite Bearings with Engineered Tribo-Surfaces, Tribol. Interface Eng. Ser., 2008, 55, p 483–500. CrossRef

T. Wollmann, S. Nitschke, T. Klauke, T. Behnisch, C. Ebert, R. Füßel, N. Modler and M. Gude, Investigating the Friction, Wear and Damage Behaviour of Plain Bearing Bushes of the Variable Stator Vane System, Tribol. Int., 2022, 165, p 107280. CrossRef

T. Smolnicki, G. Pekalski, J. Jakubik and P. Harnatkiewicz, Investigation Into Wear Mechanisms of the Bearing Raceway Used in Bucket Wheel Excavators, Arch. Civ. Mech. Eng., 2017, 17(1), p 1–8. CrossRef

N. Mokhtari, J.G. Pelham, S. Nowoisky, J.L. Bote-Garcia and C. Gühmann, Friction and Wear Monitoring Methods For Journal Bearings of Geared Turbofans Based on Acoustic Emission Signals and Machine Learning, Lubricants, 2020, 8, p 29. CrossRef

J. Liu, H.T. Ni, Z.D. Xu and G. Pan, A Simulation Analysis for Lubricating Characteristics of an Oil-Jet Lubricated Ball Bearing, Simul. Modell. Pract. Theory, 2021, 113, p 102371. CrossRef

X. Yu, X. Zuo, C. Liu, X. Zheng, H. Qu and T. Yuan, OIL FILM SHAPE PREDICTION of Hydrostatic Thrust Bearing under the Condition of High Speed and Heavy Load, Ind. Lubr. Tribol., 2018, 70, p 1243–1250. CrossRef

I.F. Santos, Controllable Sliding Bearings and Controllable Lubrication Principles: An Overview, Lubricants, 2018, 6, p 16. CrossRef

J. Ukonsaari, Wear and Friction of Synthetic Esters in a Boundary Lubricated Journal Bearing, Tribol. Int., 2003, 36(11), p 821–826. CrossRef

10.

J. Bouyer, M. Wodtke and M. Fillon, Experimental Research on a Hydrodynamic Thrust Bearing with Hydrostatic Lift Pockets: Influence of Lubrication Modes on Bearing Performance, Tribol. Int., 2022, 165, p 107253. CrossRef

11.

J. Ukonsaari and E. Kassfeldt, Friction and Wear in a Conformal Conjunction Subjected To Boundary Lubrication With Environmentally Adapted Oils, Boundary and Mixed Lubrication: Science and Applications, Proceedings of the 28th Leeds-Lyon Symposium on Tribology. Elsevier, 2002, p 167–172. https://doi.org/10.1016/S0167-8922(02)80018-9CrossRef

12.

N.D.S.A. Santos, V.R. Roso and M.T.C. Faria, Review of Engine Journal Bearing Tribology in Start-Stop Applications, Eng. Failure Anal., 2020, 108, p 104344. CrossRef

13.

R. Stribeck, M. Schröter and D.E.G. Rollenlager, Untersuchung einer Tandem-Verbundmaschine von 1000 PS, Springer, 1903.

14.

Y.J. Cao, J.Q. Sun, F. Ma, Y.Y. Chen, X.Z. Cheng, X. Gao and K. Xie, Effect of the Microstructure and Residual Stress on Tribological Behavior of Induction Hardened GCr15 Steel, Tribol. Int., 2017, 115, p 108–115. CrossRef

15.

Y.S. Su, S.X. Li, F. Yu, S.Y. Lu and Y.G. Wang, Revealing the Shear Band Origin of White Etching Area in Rolling Contact Fatigue of Bearing Steel, Int. J. Fatigue, 2021, 142, p 105929. CrossRef

16.

Y.S. Zhang, Z. Han, K. Wang and K. Lu, Friction and Wear Behaviors of Nanocrystalline Surface Layer of Pure Copper, Wear, 2006, 260(9–10), p 942–948. CrossRef

17.

G.A. Webster and A.N. Ezeilo, Residual Stress Distributions and their Influence on Fatigue Lifetimes, Int. J. Fatigue, 2001, 23, p 375–383. CrossRef

18.

Y. Xiong, T. He, P. Li, L. Chen, F. Ren and A.A. Volinsky, Effects of Laser Pulse Energy on Surface Microstructure and Mechanical Properties of High Carbon Steel, J. Central South Univ., 2015, 22(12), p 4515–4520. CrossRef

Titel: Sliding Friction and Wear Properties of GCr15 Steel under Different Lubrication Conditions
verfasst von: Tiantian He
Gaoang Song
Ruonan Shao
Sanming Du
Yongzhen Zhang
Publikationsdatum: 15.03.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 9/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-06782-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2022

Phase Formation and Diffusivity in the Ternary Cu-Zn-In System

Fracture and Elastoplastic Behavior of Polymer-Carbon Nanotube Composites under Thermomechanical Environment: An Integrated Dual-Scale Modeling and Experimental Study

Solid-State Diffusion Bonding of Pseudo-α-Ti Alloy to Ti-Stabilized Stainless Steel: With and Without Interlayer

Isoxazoline Derivatives as Inhibitors for Mild Steel Corrosion in 1M H2SO4: Computational and Experimental Investigations

Statistical Determination of Johnson-Cook Model Parameters for Porous Materials by Machine Learning and Particle Swarm Optimization Algorithm

Influence of Hardening Models on the Estimation of Residual Stresses by Finite Element Modeling in Type 316LN Stainless Steel Weld Joints

Premium Partner

Marktübersichten