nach oben

Microsystem Technologies

Erschienen in:

28.02.2022 | Review Paper

Carbon nanotubes/nanofibers (CNTs/CNFs): a review on state of the art synthesis methods

verfasst von: Rizwan Shoukat, Muhammad Imran Khan

Erschienen in: Microsystem Technologies | Ausgabe 4/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This research article discusses the state of the art synthesis methods for the formation of carbon nanotubes and nanofibers (CNTs/CNFs). Carbon nanotubes have a number of applications in the areas of biomedicine, electronics and chemical sensors etc. Overview of certain specific methods for the formation of carbon nanotubes have been reviewed in this research article. We discussed several available synthesis methods including: arc discharge, laser ablation, microwave, chemical vapor deposition and plasma enhanced chemical vapor deposition method for the formation of carbon nanotubes. Our experimental work on the synthesis of vertically aligned carbon nanotubes by using inductively coupled plasma enhanced chemical vapor deposition (IC-PECVD) is described in details. The results obtained by using the IC-PECVD process are observed and interpreted by SEM and Raman spectroscopic analysis.

Vorheriger Artikel Appointment of a new Co-Editor-in-Chief, Prof. Georg Fantner, Microsystem Technologies

Nächster Artikel A comparison between phonetic engine and GMM–UBM classifier for language identification tasks

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ai-fei Z et al (2006) Preparation of isolated single-walled carbon nanotubes with high hydrogen storage capacity, vol 6

Barnard AW, Zhang M, Wiederhecker GS, Lipson M, McEuen PL (2019) Real-time vibrations of a carbon nanotube. Nature 566:89–93CrossRef

Beumer K (2016) Broadening nanotechnology’s impact on development. Nat Nanotechnol 11:398–400CrossRef

Bishop MD, Hills G, Srimani T, Lau C, Murphy D, Fuller S, Humes J, Ratkovich A, Nelson M, Shulaker MM (2020) Fabrication of carbon nanotube field-effect transistors in commercial silicon manufacturing facilities. Nat Electron 3:492–501CrossRef

Caughman J et al (2003) Growth of vertically aligned carbon nanofibers by low-pressure inductively coupled plasma-enhanced chemical vapor deposition. Appl Phys Lett 83:1207CrossRef

Cheung C et al (2002) Diameter-controlled synthesis of carbon nanotubes. J Phys Chem B 106:2429–2433CrossRef

Delzeit L et al (2002) Growth of multiwall carbon nanotubes in an inductively coupled plasma reactor. J Appl Phys 91:6027CrossRef

Durrani YA, Riesgo T, Khan MI, Mahmood T (2016) Power analysis approach and its application to IP-based SoC Design. COMPEL Int J Comput Math Electr Electron Eng 35(3)

Endo M et al (2004) Applications of carbon nanotubes in the twenty-first century. Philos Trans A 362:2223CrossRef

Fadeel B, Kostarelos K (2020) Grouping all carbon nanotubes into a single substance category is scientifically unjustified. Nat Nanotechnol 15:164CrossRef

Gohier A et al (2006) Limits of the PECVD process for single wall carbon nanotubes growth. Chem Phys Lett 421:242–245CrossRef

Gong Q et al (2004) Fabrication and structure: a study of aligned carbon nanotube/carbon nanocomposites. Solid State Commun 131:399–404CrossRef

Grzybowski BA, Huck WTS (2016) The nanotechnology of life-inspired systems. Nat Nanotechnol 11:585–592CrossRef

Huh Y et al (2003) Controlled growth of carbon nanotubes over cobalt nanoparticles by thermal chemical vapor deposition. J Mater Chem 13:2297–2300CrossRef

Jacques D et al (2000) Synthesis of multiwalled carbon nanotubes, pp 15–20

Khairurrijal K et al (2009) Structural characteristics of carbon nanotubes fabricated using simple spray pyrolysis method. Indones J Phys 19:91CrossRef

Khan MI, Lin F (2014) Comparative analysis and design of harmonic aware low power latches and flip-flops. In: IEEE 10th international conference on electron devices and solid-state circuits (EDSSC), Chengdu

Khan MI, Buzdar AR, Lin F (2014) Ballistic transport modeling in advanced transistors. In: 12th IEEE international conference on solid-state and integrated circuit technology (ICSICT), Guilin

Khan MI, Shoukat R, Mukherjee K, Dong H (2017a) A review on pH sensitive materials for sensors and detection methods. Microsyst Technol 23(10):4391–4404CrossRef

Khan MI, Qamar A, Shabbir F, Shoukat R (2017b) Design, development and implementation of low power and high speed A/D converter in submicron CMOS technology. Microsyst Technol 23(12):6005–6014CrossRef

Khan MI, Shoukat R, Mukherjee K, Dong H (2018a) Analysis of harmonic contents of switching waveforms emitted by the ultra-high speed digital CMOS integrated circuits for use in future micro/nano systems applications. Microsyst Technol 24(2):1201–1206CrossRef

Khan MI, Dong H, Shabbir F, Shoukat R (2018b) Embedded passive components in advanced 3D chips and micro/nano electronic systems. J Microsyst Technol 24(2):869–877CrossRef

Khan MI, Alshammari AS, Alshammari BM, Alzamil AA (2021) Estimation and analysis of higher-order harmonics in advanced integrated circuits to implement noise-free future-generation micro- and nanoelectromechanical systems. Micromachines 12(5):541. https://doi.org/10.3390/mi12050541CrossRef

Kobayashi Y et al (2004) CVD growth of single-walled carbon nanotubes using sizecontrolled nanoparticle catalyst. Thin Solid Films 464:286–289CrossRef

Kumar M, Ando Y (2008) Gigas growth of carbon nanotubes. Defence Sci J 58:496–503CrossRef

Kuzmany H, Kukovecz A, Simon F, Holzweber M, Kramberger Ch, Pichler T (2004) Functionalization of carbon nanotubes. Synth Metals 141:113–122CrossRef

Lin CC, Leu IC, Yen JH, Hon MH (2004) Sheath-dependent orientation control of carbon nanofibres and carbon nanotubes during plasma-enhanced chemical vapour deposition. Nanotechnology 15:176CrossRef

Lin YY, Wei HW, Leou KC, Lin H, Tung CH, Wei MT, Lin C, Tsai CH (2006) Experimental characterization of an inductively coupled acetylene/hydrogen plasma for carbon nanofiber synthesis. J Vacuum Sci Technol B Microelectron Nanometer Struct 24:97CrossRef

Pant M, Singh R, Negi P, Tiwari K, Singh Y (2021) A comprehensive review on carbon nano-tube synthesis using chemical vapor deposition. Mater Today Proc 46(20):11250–11253. ISSN 2214-7853

Park D et al (2003) Synthesis of carbon nanotubes on metallic substrates by a sequential combination of PECVD and thermal CVD. Carbon 41:1025–1029CrossRef

Rathinavel S, Priyadharshini K, Panda D (2021) A review on carbon nanotube: An overview of synthesis, properties, functionalization, characterization, and the application. Mater Sci Eng B 268:115095, ISSN 0921-5107

Robertson J (2007) Growth of nanotubes for electronics. Mater Today 10:36–43CrossRef

Sanvito S, Kwon YK, Tomanek D, Lambert CJ (2000) Fractional quantum conductance in carbon nanotubes. Phys Rev Lett 84:1974–1977CrossRef

Shoukat R, Khan MI (2017) Growth of nanotubes using IC-PECVD as benzene carbon carrier. Microsyst Technol 23(12):5447–5453CrossRef

Shoukat R, Khan MI (2018a) Synthesis of vertically aligned carbon nanofibers using inductively coupled plasma enhanced chemical vapor deposition. Electr Eng 100(2):997–1002CrossRef

Shoukat R, Khan MI (2018b) Design and development of a clip building block system for MEMS. Microsyst Technol 24(2):1025–1031CrossRef

Shoukat R, Khan MI (2018c) Nanotechnology based electrical control and navigation system for worm guidance using electric field gradient. Microsyst Technol 24:989–993CrossRef

Shoukat R, Khan MI (2019) Synthesis of nanostructured based carbon nanowalls at low temperature using inductively coupled plasma chemical vapor deposition (ICP-CVD). Microsyst Technol 25:4439–4444CrossRef

Shoukat R, Khan MI (2020) Amalgamation of aligned carbon nanostructures at low temperature and the synthesis of vertically aligned carbon nanofibers (CNFs). Microsyst Technol 26:1521–1529CrossRef

Shoukat R, Khan MI (2021) Carbon nanotubes: a review on properties, synthesis methods and applications in micro and nanotechnology. Microsyst Technol 27:4183–4192CrossRef

Singh S, Jarvis A (2010) Microwave plasma-enhanced chemical vapour deposition growth of carbon nanostructures. S Afr J Sci 106:4

Singh C et al (2003) Production of controlled architectures of aligned carbon nanotubes by an injection chemical vapour deposition method. Carbon 41:359–368CrossRef

Vajtai R, Wei BQ, Ajayan PM (2004) Controlled growth of carbon nanotubes. Philos Trans R Soc Lond Ser A Math Phys Eng Sci 362:2143CrossRef

Wei S, Kanga WP, Davidson JL, Choi BK, Huang JH (2006) vertically aligned carbon nanotube field emission devices fabricated by furnace thermal chemical vapor deposition at atmospheric pressure. J Vacuum Sci Technol B Microelectron Nanometer Struct 24:1190CrossRef

Xia ZH, Guduru PR, Curtin WA (2007) Enhancing mechanical properties of multiwall carbon nanotubes via sp³ interwall bridging. Phys Rev Lett 98:245501CrossRef

Xie S, Li W, Pan Z, Chang B, Sun L (2000) Carbon nanotube arrays. Mater Sci Eng A 286:11–15CrossRef

Xu B et al (2007a) Growth of well-aligned carbon nanotubes in a plasma system using ferrocene solution in ethanol. Thin Solid Films 515:6726–6729CrossRef

Xu B, Deng H, Dai Y, Yang B (2007b) Novel aerosol method for aligned carbon nanotubes synthesis, vol 17. Transactions of the Nonferrous Metals Society of China

Yuji T, Sung Y (2007) RF PECVD characteristics for the growth of carbon nanotubes in a CH4–N2 mixed gas. IEEE Trans Plasma Sci 35:1027–1032CrossRef

Zhou M, Luo P, Li A, Wu Y, Khan MI, Lyu J, Li F, Li G (2018) Fabrication of silica membrane through surface-induced condensation on porous block copolymer. Chem Select Commun 3(33):9694–9699

Titel: Carbon nanotubes/nanofibers (CNTs/CNFs): a review on state of the art synthesis methods
verfasst von: Rizwan Shoukat
Muhammad Imran Khan
Publikationsdatum: 28.02.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: Microsystem Technologies / Ausgabe 4/2022
Print ISSN: 0946-7076
Elektronische ISSN: 1432-1858
DOI: https://doi.org/10.1007/s00542-022-05263-2

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2022

A high gain low noise amplifier for implantable cardio technologies

Design, simulation and analysis of RF MEMS capacitive shunt switches with high isolation and low pull-in-voltage

Enhanced 3-axis sensitivity of a CMOS MEMS convective accelerometer using a new power efficient heater structure

Survey on various architectures of preamplifiers for electroencephalogram (EEG) signal acquisition

Polyformaldehyde-based microfluidics and application in enhanced oil recovery

Design of a super-wideband on-chip antenna with improved characteristics using bulk micromachining