Ausgabe 1/2015
Inhalt (30 Artikel)
On the Occurrence of Anhydrite in the Sulphatic Claystones of the Gypsum Keuper
G. Anagnostou, K. Serafeimidis, A. Vrakas
The Solubilities and Thermodynamic Equilibrium of Anhydrite and Gypsum
K. Serafeimidis, G. Anagnostou
The Influence of NaCl Crystallization on the Long-Term Mechanical Behavior of Sandstone
Hong Zheng, Xia-Ting Feng, Quan Jiang
Effect of Pre-Loading with Tensile Stress on Laboratory UCS of a Synthetic Rock
Mahendra Singh, Vijaya Lakshmi, Yudhbir, L. P. Srivastava
Hydraulic and Hydromechanical Laboratory Testing of Large Crystalline Rock Cores
Johan Thörn, Lars O. Ericsson, Åsa Fransson
Large Scale Tests on Jointed and Bedded Rocks Under Multi-Stage Triaxial Compression and Direct Shear
Maximiliano R. Vergara, Peter Kudella, Theodoros Triantafyllidis
Test Design and Sample Preparation Procedure for Experimental Investigation of Hydraulic Fracturing Interaction Modes
M. Sarmadivaleh, V. Rasouli
Characterization of Strength of Intact Brittle Rock Considering Confinement-Dependent Failure Processes
Peter K. Kaiser, Bo-Hyun Kim
Relationship Between Pre-failure and Post-failure Mechanical Properties of Rock Material of Different Origin
Levent Tutluoğlu, İbrahim Ferid Öge, Celal Karpuz
Evaluation of Mode I Fracture Toughness Assisted by the Numerical Determination of K-Resistance
Takahiro Funatsu, Norikazu Shimizu, Mahinda Kuruppu, Kikuo Matsui
Finite Deformation Analysis on Sandstone Subjected to Thermo-Hydro-Mechanical (T-H-M) Coupling
Yanan Gao, Louis Ngai Yuen Wong, Feng Gao
Modelling the Shear Behaviour of Rock Joints with Asperity Damage Under Constant Normal Stiffness
Buddhima Indraratna, Sivanathan Thirukumaran, E. T. Brown, Song-Ping Zhu
Resonant Column Apparatus Tests on Intact and Jointed Rock Specimens with Numerical Modelling Validation
A. Perino, G. Barla
Experimental and Numerical Analysis of the Shear Behaviour of Cemented Concrete–Rock Joints
H. M. Tian, W. Z. Chen, D. S. Yang, J. P. Yang
An Experimental Study and Constitutive Modeling of Saturated Porous Rocks
S. Y. Xie, J. F. Shao
Early Warning Monitoring of Natural and Engineered Slopes with Ground-Based Synthetic-Aperture Radar
C. Atzeni, M. Barla, M. Pieraccini, F. Antolini
A Reliability-Based Approach for the Design of Rockfall Protection Fences
F. Bourrier, S. Lambert, J. Baroth
Influence of Corrosion on the Abrasion of Cutter Steels Used in TBM Tunnelling
N. Espallargas, P. D. Jakobsen, L. Langmaack, F. J. Macias
A Closed-Form Solution for Tunnels with Arbitrary Cross Section Excavated in Elastic Anisotropic Ground
Huy Tran Manh, Jean Sulem, Didier Subrin
Rock Burst Intensity Classification Based on the Radiated Energy with Damage Intensity at Jinping II Hydropower Station, China
Bing-Rui Chen, Xia-Ting Feng, Qing-Peng Li, Ru-Zhou Luo, Shaojun Li
Numerical Modeling for Yield Pillar Design: A Case Study
Wenfeng Li, Jianbiao Bai, Syd Peng, Xiangyu Wang, Ying Xu
Effective Stress and Permeability Redistributions Induced by Successive Roadway and Borehole Excavations
Shengyong Hu, Fubao Zhou, Yingke Liu, Tongqiang Xia
Stress Evolution in Roadway Rock Bolts During Mining in a Fully Mechanized Longwall Face, and an Evaluation of Rock Bolt Support Design
Kai Zhang, Guimin Zhang, Rongbin Hou, Yu Wu, Hongqi Zhou
Modelling of Longwall Mining-Induced Strata Permeability Change
D. P. Adhikary, H. Guo
On the Proper Estimation of the Confidence Interval for the Design Formula of Blast-Induced Vibrations with Site Records
W. M. Yan, Ka-Veng Yuen
K-means Algorithm Based on Particle Swarm Optimization for the Identification of Rock Discontinuity Sets
Yanyan Li, Qing Wang, Jianping Chen, Liming Xu, Shengyuan Song
A Modified Correlation Between Roughness Parameter Z 2 and the JRC
Yanan Gao, Louis Ngai Yuen Wong
Relation Between Stresses Obtained from Kaiser Effect Under Uniaxial Compression and Hydraulic Fracturing
Rangang Yu, Yong Tian, Xiaoxue Wang
Slope Failure in a Foliated Rock Mass with Non-Uniform Joint Spacing: a Comparison Between Numerical and Centrifuge Model Results
S. R. Pant, D. P. Adhikary, A. V. Dyskin
Identification Model and Indicator of Outburst-Prone Coal Seams
Chenglin Jiang, Lehua Xu, Xiaowei Li, Jun Tang, Yujia Chen, Shixiang Tian, Huihui Liu