nach oben

Journal of Materials Engineering and Performance

Erschienen in:

23.05.2022 | Technical Article

Optimization of Welding Parameters During Ti-TA2/5A06Al Dissimilar Double-Sided Cold Arc Metal Inert Gas Welding

verfasst von: Linling Song, Shouzheng Wei, Wenji Rao, Zhiyong Li, Yingqiao Zhang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A double-sided cold arc MIG welding process was used in Ti-TA2 /5A06Al dissimilar welding. The effects of front welding heat inputs, bevel angles, and wire offsets on the Ti/Al interfacial microstructures and on the joint tensile strength were analyzed. The optimized parameter ranges were: front welding heat input of 0.94-1.24 kJ/cm, the bevel angle of 35°-45°, and wire offset of − 1. 0 to + 1. 0 mm. Under proper parameters, a straight bonding interface was formed between the titanium and the weld; no welding defects such as crack were found near the interface. Two different Ti/Al interfaces were observed in a single sample. A double-layer structure with a Ti₃Al layer and a TiAl₃ layer was formed at the interface in the 1/4 top part of the joint, while only a serrated TiAl₃ layer was formed in other regions. The tensile strength of the joints was tested without removing the reinforcement. The ultimate tensile strength of the joints surpassed 320 MPa, and the joints were mostly broken near the Ti/Al interface.

Vorheriger Artikel Effect of Electromagnetic Stirring Frequency on Inconel625-High Strength Low Alloy Steel Functionally Graded Material Fabricated by Wire Arc Additive Manufacturing

Nächster Artikel The Effects of Heat Treatment on Tensile and Thermal Expansion Behavior of Laser Powder-Bed Fusion Invar36

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

P. Li, Z. Lei, J. Xinrui et al., Effects of Laser Power on the Interfacial Intermetallic Compounds and Mechanical Properties of Dual-Spot Laser Welded–Brazed Ti/Al Butt Joint, Opt. Las. Tech., 2020, 124, p 105.CrossRef

Z. Lei, P. Li, X. Zhang et al., Microstructure and Mechanical Properties of Welding–Brazing of Ti/Al Butt Joints with Laser Melting Deposition Layer Additive, J. Manuf. Process., 2019, 38, p 411–421. https://doi.org/10.1016/j.jmapro.2019.01.040CrossRef

S.H. Chen, L.Q. Li, Y.B. Chen et al., Si Diffusion Behavior During Laser Welding-Brazing of Al Alloy and Ti Alloy with Al-12Si Filler Wire, Trans. Nonferr. Met. Soc. China, 2010, 20(1), p 64–70. https://doi.org/10.1016/S1003-6326(09)60098-4CrossRef

S.X. Lv, Q.L. Cui, Y.X. Huang et al., Influence of Zr Addition on TIG Welding-Brazing of Ti-6Al-4V to Al5A06, Mater. Sci. Eng., A, 2013, 568, p 150–154. https://doi.org/10.1016/j.msea.2013.01.047CrossRef

L. Li, B. Zhao and X. Wu, Tungsten Inert Gas Welding of Dissimilar Metals Aluminum to Titanium with Aluminum Based Wire, Mater. Res. Expr., 2019, 6(5), p 056561. https://doi.org/10.1088/2053-1591/ab056fCrossRef

S. Wei, W. Rao, Z. Li et al., Cold Arc MIG Welding of Titanium Ti6Al4V to Aluminum 5A05Al Using Al–Mg5 Filler, Met. Mater. Int., 2020, 26(10), p 1555–1561. https://doi.org/10.1007/s12540-019-00402-3CrossRef

S. Wei, Y. Li, J. Wang et al., Influence of Welding Heat Input on Microstructure of Ti/Al Joint During Pulsed Gas Metal Arc Welding, Mater. Manuf. Process., 2014, 29(8), p 954–960. https://doi.org/10.1080/10426914.2014.880464CrossRef

S. Wei, Y. Li, J. Wang et al., Microstructure and Joining Mechanism of Ti/Al Dissimilar Joint by Pulsed Gas Metal Arc Welding, Int. J. Adv. Manuf. Tech., 2014, 70(5), p 1137–1142. https://doi.org/10.1007/s00170-013-5290-5CrossRef

J. Li, Q. Sun, Y. Liu et al., Cold Metal Transfer Welding–Brazing of Pure Titanium TA2 to Aluminum Alloy 6061–T6, Adv. Eng. Mater., 2017, 19(2), p 1600494. https://doi.org/10.1002/adem.201600494CrossRef

10.

S. Wei, Y. Li, J. Wang et al., Formation of Brittle Phases During Pulsed Current Gas Tungsten Arc Welding of Titanium to Aluminum Alloys, J. Mater. Eng. Perform., 2014, 23(4), p 1451–1457. https://doi.org/10.1007/s11665-014-0874-2CrossRef

11.

B.T. Wu, Z.X. Pan, D.H. Ding et al., A Review of the Wire Arc Additive Manufacturing of Metals: Properties, Defects and Quality Improvement, J. Manuf. Process., 2018, 35, p 127–139. https://doi.org/10.1016/j.jmapro.2018.08.001CrossRef

12.

Y. Zhang, J. Huang, Z. Ye et al., An Investigation on Butt Joints of Ti6Al4V and 5A06 Using MIG/TIG Double-Side Arc Welding-Brazing, J. Manuf. Process., 2017, 27, p 221–225. https://doi.org/10.1016/j.jmapro.2017.05.010CrossRef

13.

F. Möller, M. Grden, C. Thomy et al., Combined laser beam welding and brazing process for aluminium titanium hybrid structures, Phys. Procedia, 2011, 12, p 215–223. https://doi.org/10.1016/j.phpro.2011.03.028CrossRef

14.

Y.F. Zhang, J.H. Huang, Z. Ye et al., Influence of Welding Parameters on the IMCs and the Mechanical Properties of Ti/Al Butt Joints Welded by MIG/TIG Double-Sided Arc Welding-Brazing, J. Alloy. Compd., 2018, 747, p 764–771. https://doi.org/10.1016/j.jallcom.2018.03.119CrossRef

15.

W.V. Vaidya, M. Horstmann, V. Ventzke et al., Improving Interfacial Properties of a Laser Beam Welded Dissimilar Joint of Aluminium AA6056 and Titanium Ti6Al4V for Aeronautical Applications, J. Mater. Sci., 2010, 45(22), p 6242–6254. https://doi.org/10.1007/s10853-010-4719-6CrossRef

16.

F. Möller, C. Thomy and F. Vollertsen, Joining of Titanium-Aluminium Seat Tracks for Aircraft Applications — System Technology and Joint Properties, Weld. World, 2013, 56, p 108–114. https://doi.org/10.1007/BF03321341CrossRef

17.

S.S. Hu, H. Zhang, Z.J. Wang et al., The Arc Characteristics of Cold Metal Transfer Welding with AZ31 Magnesium Alloy Wire, J. Manuf. Process., 2016, 24, p 298–306. https://doi.org/10.1016/j.jmapro.2016.10.001CrossRef

18.

Y.H. Chen, Q. Ni, L.M. Ke et al., Interface Characteristic of Friction Stir Welding Lap Joints of Ti/Al Dissimilar Alloys [J], Trans. Nonferr. Met. Soc. China, 2012, 22(2), p 299–304. https://doi.org/10.1016/S1003-6326(11)61174-6CrossRef

19.

Y. Miao, Z. Ma, X. Yang et al., Experimental Study on Microstructure and Mechanical Properties of AA6061/Ti-6Al-4V Joints Made by Bypass-Current MIG Welding-Brazing, J. Mater. Proc. Tech., 2018, 260, p 104–111. https://doi.org/10.1016/j.jmatprotec.2018.05.019CrossRef

20.

M. Fan, Yu. Weiwei, W. Wang et al., Microstructure and Mechanical Properties of Thin-Multilayer Ti/Al Laminates Prepared by One-Step Explosive Bonding, J. Mater. Eng. Perform., 2017, 26(1), p 277–284. https://doi.org/10.1007/s11665-016-2410-zCrossRef

21.

I. Tomashchuk, P. Sallamand, A. Méasson et al., Aluminum to Titanium Laser Welding-Brazing in V-Shaped Groove, J. Mater. Proc. Tech., 2017, 245, p 24–36. https://doi.org/10.1016/j.jmatprotec.2017.02.009CrossRef

22.

L.Q. Li, H.B. Xia, C.W. Tan et al., Effect of Groove Shape on Laser Welding-Brazing Al to Steel, J. Mater. Proc. Tech., 2018, 252, p 573–581. https://doi.org/10.1016/j.jmatprotec.2017.10.025CrossRef

23.

Y.B. Chen, S.H. Chen and L.Q. Li, Influence of Interfacial Reaction Layer Morphologies on Crack Initiation and Propagation in Ti/Al Joint by Laser Welding–Brazing, Mater. Des., 2010, 31(1), p 227–233. https://doi.org/10.1016/j.matdes.2009.06.029CrossRef

24.

G. Luo, J. He, Z. Song et al., Influence of Effective Physical Contact Area on Microstructure and Mechanical Properties of Diffusion-Bonded TC4/1060Al Joints, J. Mat. Eng. Perfor., 2019, 28(2), p 1226–1234. https://doi.org/10.1007/s11665-019-3856-6CrossRef

Titel: Optimization of Welding Parameters During Ti-TA2/5A06Al Dissimilar Double-Sided Cold Arc Metal Inert Gas Welding
verfasst von: Linling Song
Shouzheng Wei
Wenji Rao
Zhiyong Li
Yingqiao Zhang
Publikationsdatum: 23.05.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07019-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2022

Oxidation Behavior of SiCf/SiC Minicomposites with Multilayered (BN/SiC)n Interfacial Coatings under Humid Environment

A New Dominance Distribution Method to Select Materials with Higher Fatigue Resistance under Property Scatter and Load Uncertainty

Corrosion and Metal Release Investigation of a Porous Biomedical Vitallium Alloy Coated with 58S Sol-Gel Bioactive Glass

Effects of Various Heat Inputs and Reheating Processes on the Microstructure and Properties of Low-Carbon Bainite Weld Metals Containing 4% Ni

As-Cast High Entropy Shape Memory Alloys of (TiHfX)50(NiCu)50 with Large Recoverable Strain and Good Mechanical Properties

Insights on Microstructure and Failure Characteristics of Resistance Spot Welds of Galvannealed Dual Phase Steel

Premium Partner

Marktübersichten