Ausgabe 9-10/2012
Special Issue on 21st Annual ASME Conference on Information Storage and Processing Systems, Santa Clara, California, USA
Inhalt (61 Artikel)
ASME ISPS 2011 editorial: the 21st annual ASME conference on information storage and processing systems, Santa Clara, California, USA
No-Cheol Park, Jen-Yuan Chang
Optimization of a diverging micromixer driven by periodic electroosmotics
Chen-li Sun, Shin-Shian Shie
Adaptive digital demodulation of sinusoidal encoder signal for positioning control of spiral servo track writing
Hyun Jae Kang, Sang Hyun Kim, Seung-Hi Lee, Chung Choo Chung
Probing and diagnosis of slider–disk interactions in nanometer clearance regime using artificial neural network
Gang Sheng, Loulin Huang, Jianfeng Xu, Jen-Yuan Chang
A study of non-operational dynamic responses of disk in 3.5 in. hard disk drive to impact load
Gang Sheng Chen, Cheng-fu Chen, Terrence Wilburn
Maximum power tracking of a generic photovoltaic system via a fuzzy controller and a two-stage DC–DC converter
Paul C.-P. Chao, Wei-Dar Chen, Chih-Kuo Chang
Ellipsometric measurement accuracy of ultrathin lubricant thickness on magnetic head slider
J. M. Zhao, M. S. Zhang, M. C. Yang, R. Ji
Optimal design of ITO/organic photonic crystals in polymer light-emitting diodes with sidewall reflectors for high efficiency
C. H. Tsai, Paul C.-P. Chao
A new liquid crystal lens with axis-tunability via three sector electrodes
Tse-Yi Tu, Paul C.-P. Chao, Chin-Teng Lin
Suppression of cross-track vibrations using a self-sensing micro-actuator in hard disk drives
Uwe Boettcher, Liane Matthes, Bernhard Knigge, Raymond A. de Callafon, Frank E. Talke
Dynamic instability of thermal-flying-height-control sliders at touchdown
Jinglin Zheng, David B. Bogy
Design of a new triple electro-magnetic optical image stabilization actuator to compensate for hand trembling
Choong Kim, Myeong-Gyu Song, YoungJun Kim, No-Cheol Park, Kyoung-Su Park, Young-Pil Park
Robust optimal design of the FDBs in a HDD to reduce NRRO and RRO
Jihoon Lee, Gunhee Jang, Heonjeong Ha
Friction effect on ball positioning of an automatic balancer in optical disk drives
T. C. Chan, C. K. Sung, Paul C. P. Chao
Depletion of monolayer liquid lubricant films induced by high-frequency pulsed-laser heating in thermally assisted magnetic recording
Norio Tagawa, Takao Miki, Hiroshi Tani
Development and optimal design of a HDD spindle motor with pulling magnet to reduce electrical loss
Sangjin Sung, Gunhee Jang, Kyungjin Kang, Jiyeon Kim, Dohyun Park, Donghun Choi
Analysis of PDT noise originating from driving method of a HDD spindle motor
Sangjin Sung, Gunhee Jang, Changjin Lee, Kyungjin Kang
Behavior of fluid lubricant and air–oil interface of operating FDBs due to operating condition and seal design
Kyungmoon Jung, Gunhee Jang, Juho Kim
Feasibility study of thermal positioning control actuator for hard disk drives
Masaru Furukawa, Junguo Xu, Jin Liu, Jianhua Li, Shoya Nosaki, Haruaki Otsuki, Kenji Suzuki, Kyosuke Ono
Analysis of the unloading performance considering dimple–flexure behavior in HDD
Kyoung-Su Park, Geonyup Lim, Young-Pil Park, Eo-Jin Hong, No-Cheol Park
Depletion and harvesting thermal energy from actuator arm electronics in hard disk drives
Jen-Yuan Chang, Di Wu
Human-assisted virtual reality for a magnetic-haptic micromanipulation platform
Moein Mehrtash, Mir Behrad Khamesee, Susumu Tarao, Naoaki Tsuda, Jen-Yuan Chang
Motion control of a magnetically levitated microrobot using magnetic flux measurement
Moein Mehrtash, Mir Behrad Khamesee, Naoaki Tsuda, Jen-Yuan Chang
Drive level acoustic defectoscopy for head disc interface (HDI) integration and manufacturing
Antanas Daugela, Srinivas Tadepalli
Fabrication and testing of a self-propelled, miniaturized PDMS flotilla
Hao Li, Lei Qiao, Xinchuan Liu, Cheng Luo
Reduction of windage loss of an optical disk drive utilizing air-flow analysis and response surface methodology
Y. H. Jung, G. H. Jang
A method for determining ultrathin DLC film thickness by spectroscopic ellipsometry
J. M. Zhao, P. Yang
Non-operational shock analysis and design of head gimbal assembly in spinning data storage devices
Jen-Yuan Chang, Rana Noman Mubarak
Micro-tribological interface model for friction-induced cold start-up running dynamics
Jonah H. Lee, Gang Sheng, Jen-Yuan Chang
Parametric simulation of piezoelectric flying height control slider using shear-mode deformation
Shengnan Shen, Hui Li, Bo Liu, Hejun Du, Nobutoshi Sagawa
Design of mirror system in digital single lens reflex camera for high-speed continuous shooting
Seungho Lim, Byung-Han Ko, Kyoung-Su Park, No-Cheol Park, Young-Pil Park, Chongsam Chung, Jin Won Lee
Generation of ZnO nanowires with varied densities and lengths by tilting a substrate
Anirban Chakraborty, Xinchuan Liu, Hui Wang, Cheng Luo
Shock response analysis on thermal stick–slip phenomenon in hard disk drive
Hajime Eguchi, Isao Kobayashi
Experiments on slider lubricant interactions and lubricant transfer using TFC sliders
Sripathi Vangipuram Canchi, David B. Bogy
Development of surface tension-driven microboats and microflotillas
Cheng Luo, Hao Li, Lei Qiao, Xinchuan Liu
A U-shaped actuation system for dual-stage actuators used in hard disk drives
Kenji Suzuki, Eiji Soga, Shinsuke Nakagawa, Toshihiko Shimizu
Contact between a thermal flying height control slider and a disk asperity
Wenping Song, Andrey Ovcharenko, Min Yang, Hao Zheng, Frank E. Talke
Shock and vibration isolation of laptop hard disk drive using rubber mount
Kyoung-Su Park, Seungho Lim, Young-Pil Park, Young-Bae Chang, No-Cheol Park
Investigation of thermo-mechanical contact between slider and bit patterned media
Longqiu Li, Wenping Song, Chunhui Zhang, Andrey Ovcharenko, Guangyu Zhang, Frank E. Talke
Improvement of slider off-track vibration through design parameter modifications of a compatible FDB spindle system
Seokhwan Kim, Jaesung Park, YoungTae Kim, Ju Ho Kim, No-Cheol Park, Young-Pil Park, Kyoung-Su Park
Thermal actuator for accurate positioning read/write element in hard disk drive
Jin Liu, Kyosuke Ono, Junguo Xu, Jianhua Li, Masaru Furukawa
Simulation of thermal flying height control slider with built-in contact sensor
Shengnan Shen, Hejun Du, Bo Liu, Peihong Wang
Effect of reduction of slider pitch-mode vibration on magnetic-recording performance at low-clearance head–disk interface
Yuki Shimizu, Junguo Xu, Jianhua Li, Hidekazu Kohira, Kiyoshi Hashimoto
Lubricant transfer caused by breakage of liquid meniscus bridge
Hiroshige Matsuoka, Masaya Kan-nen, Shigehisa Fukui
Design of suspension-based and collocated dual stage actuated suspensions
David Lengert, Edmund B. Fanslau Jr., Frank E. Talke
Analysis of inter-symbol-interference caused by shift misalignment of two objective lenses in high-NA micro holographic storage
Cheol-Ki Min, Do-Hyung Kim, Sungbin Jeon, Kyoung-Su Park, Young-Pil Park, Hyunseok Yang, No-Cheol Park, Jaegeun Kim
Static and dynamic flying characteristics of a slider on bit-patterned media (dynamic responses based on frequency domain analysis)
Shigehisa Fukui, Atsusi Sato, Hiroshige Matsuoka
Discrete-time dual peak control for disturbance rejection
Kyoung-Su Park, Sangmin Suh
Design and experimental validation of a sliding-mode stabilizer for a ship-carried satellite antenna
Paul C.-P. Chao, Chun-Wei Chiu
Time dependent simulation of active flying height control of TFC sliders
Pablo Antonio Salas, Uwe Boettcher, Frank E. Talke
Effect of disk support system dynamics on the stability of head–disk interface during an operational shock in a mobile hard disk drive
Rahul Rai, David Bogy
Pattern analysis for tilt servo control in holographic data storage system
Jang Hyun Kim, Hyunseok Yang, Nakyeong Kim, Wooyoung Jeong, Jin Bae Park
Contact and temperature rise of thermal flying height control sliders in hard disk drives
Liane Matthes, Uwe Boettcher, Bernhard Knigge, Raymond de Callafon, Frank E. Talke
Optimization of adaptive feedforward repeatable run-out cancellation for positioning control system of hard disk drives
Shota Yabui, Atushi Okuyama, Masahito Kobayashi, Takenori Atsumi
Tracking servo method for holographic data storage using discrete pre-patterns
Sung-Yong Lim, Nakyeong Kim, Kyuil Jung, Jae-Seong Lee, Yoon-Koo Kang, Hyunseok Yang, Kyoung-Su Park, No-Cheol Park, Young-Pil Park
Integrated servo-mechanical control systems design using Nyquist plots for high-performance mechatronics
Chee Khiang Pang, Fan Hong, Xiaoyun Wang
Numerical simulation of thermal flying height control sliders in heat-assisted magnetic recording
Hao Zheng, Hui Li, Frank E. Talke
A dual step precision multi-DOF stage for maskless digital lithography
Yong Seok Ihn, Sang-Hoon Ji, Hyungpil Moon, Hyouk Ryeol Choi, Ja Choon Koo
Track following servo control for rotary piezoelectric motor based primary actuation in hard disk drives
V. Venkataramanan, Gao Feng, Benny Gaber