Skip to main content

Metallurgical and Materials Transactions A

Ausgabe 11/2017

Inhalt (60 Artikel)

Topical Collection: Characterization of Minerals, Metals, and Materials 2017

Characterizing the Effect of Laser Power on Laser Metal Deposited Titanium Alloy and Boron Carbide

E. T. Akinlabi, M. F. Erinosho

Topical Collection: Carl Koch Symposium: Mechanical Behavior of Nanomaterials

In Situ Studies on the Irradiation-Induced Twin Boundary-Defect Interactions in Cu

C. Fan, Jin Li, Zhe Fan, H. Wang, X. Zhang

Topical Collection: Carl Koch Symposium: Mechanical Behavior of Nanomaterials

Bulk Nanostructured Materials

C. C. Koch, T. G. Langdon, E. J. Lavernia

Open Access Communication

Determination of Crystal Orientation by Ω-Scan Method in Nickel-Based Single-Crystal Turbine Blades

Kamil Gancarczyk, Robert Albrecht, Hans Berger, Dariusz Szeliga, Andrzej Gradzik, Jan Sieniawski

Communication

Characterizing Grain-Oriented Silicon Steel Sheet Using Automated High-Resolution Laue X-ray Diffraction

Peter Lynch, Matthew Barnett, Andrew Stevenson, Bevis Hutchinson

Communication

Hydrogen Permeation in Cold-Rolled High-Mn Twinning-Induced Plasticity Steels

Do Kyeong Han, A In Hwang, Woo Jun Byeon, Seung Jeong Noh, Dong-Woo Suh

Communication

Influence of Heating Rate on Annealing and Reverse Transformation Behavior of TRIP Steels Having Martensite as Starting Microstructure

Jeong In Kim, Yong Hoon Choi, Joo Hyun Ryu, Sea Woong Lee, Kyooyoung Lee, Dong-Woo Suh

Open Access Communication

On a Testing Methodology for the Mechanical Property Assessment of a New Low-Cost Titanium Alloy Derived from Synthetic Rutile

L. L. Benson, L. A. Benson Marshall, N. S. Weston, I. Mellor, M. Jackson

Open Access

Retained Austenite Transformation during Heat Treatment of a 5 Wt Pct Cr Cold Work Tool Steel

M. Arbab Rehan, Anna Medvedeva, Lars-Erik Svensson, Leif Karlsson

Effect of Temperature and Composition on NiAl Precipitation and Morphology in Fe-Ni-Al Alloys

C. Ferreira-Palma, E. Contreras-Piedras, N. Cayetano-Castro, M. L. Saucedo-Muñoz, V. M. Lopez-Hirata, J. L. González-Velázquez, H. J. Dorantes-Rosales

Open Access

Widening of Laths in Bainite

Jiaqing Yin, Mats Hillert, Annika Borgenstam

Open Access

Kinetics of the fcc → hcp Phase Transformation in Cu-Ge Solid Solutions Upon Isothermal Aging

E. Polatidis, N. Zotov, E. Bischoff, E. J. Mittemeijer

Relating Residual Stress and Substructural Evolution During Tensile Deformation of an Aluminum-Manganese Alloy

Arijit Lodh, Tawqeer Nasir Tak, Aditya Prakash, P. J. Guruprasad, Christopher Hutchinson, Indradev Samajdar

Effect of Boron on the Strength and Toughness of Direct-Quenched Low-Carbon Niobium Bearing Ultra-High-Strength Martensitic Steel

Jaakko Hannula, Jukka Kömi, David A. Porter, Mahesh C. Somani, Antti Kaijalainen, Pasi Suikkanen, Jer-Ren Yang, Shao-Pu Tsai

Open Access

Influence of Filler Alloy Composition and Process Parameters on the Intermetallic Layer Thickness in Single-Sided Cold Metal Transfer Welding of Aluminum-Steel Blanks

Zahra Silvayeh, Rudolf Vallant, Christof Sommitsch, Bruno Götzinger, Werner Karner, Matthias Hartmann

Open Access

The Influence of Thermal Cycles on the Microstructure of Grade 92 Steel

X. Xu, G. D. West, J. A. Siefert, J. D. Parker, R. C. Thomson

Thermal Modeling of Resistance Spot Welding and Prediction of Weld Microstructure

M. Sheikhi, M. Valaee Tale, GH. R. Usefifar, Arash Fattah-Alhosseini

Open Access

The Role of Recrystallization in Spontaneous Grain Refinement of Rapidly Solidified Ni3Ge

Nafisul Haque, Robert F. Cochrane, Andrew M. Mullis

Open Access

New Experimental Technique for Nodularity and Mg Fading Control in Compacted Graphite Iron Production on Laboratory Scale

Juan Carlos Hernando, Björn Domeij, Daniel González, José Manuel Amieva, Attila Diószegi

Comparison of SPS Processing Behavior between As Atomized and Cryomilled Aluminum Alloy 5083 Powder

Frank Kellogg, Brandon McWilliams, Jennifer Sietins, Anit Giri, Kyu Cho

An Atom Probe Study of κ-carbide Precipitation in Austenitic Lightweight Steel and the Effect of Phosphorus

L. N. Bartlett, D. C. Van Aken, J. Medvedeva, D. Isheim, N. Medvedeva, K. Song

Open Access

From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample

D. Tourret, J. C. E. Mertens, E. Lieberman, S. D. Imhoff, J. W. Gibbs, K. Henderson, K. Fezzaa, A. L. Deriy, T. Sun, R. A. Lebensohn, B. M. Patterson, A. J. Clarke

Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing

Eric A. Lass, Mark R. Stoudt, Maureen E. Williams, Michael B. Katz, Lyle E. Levine, Thien Q. Phan, Thomas H. Gnaeupel-Herold, Daniel S. Ng

The Kinetics of Precipitate Dissolution in a Nickel-Base Superalloy

S. L. Semiatin, N. C. Levkulich, A. E. Saurber, D. W. Mahaffey, E. J. Payton, O. N. Senkov

A Crystal Plasticity Approach for Shear Banding in Hot Rolled High-Strength Steels

Matti Lindroos, Anssi Laukkanen, Veli-Tapani Kuokkala

Aging Strengthening Mechanism of the Cu-1.0Zr Alloy

Ka Tian, Baohong Tian, Yi Zhang, Yong Liu, Alex A. Volinsky

Phase Stability of Intermetallic Compound Ce3Al in Mechanical Milling

Yan-ping Zhang, Hiroyuki Takeya, Kenji Sakurai

Different Effect of Co on the Formation of Topologically Close-Packed Phases in Ni-Cr-Mo and Ni-Cr-Re Alloys

Qianying Shi, Ning An, Jiajie Huo, Xianfei Ding, Yunrong Zheng, Qiang Feng

Vacuum Tribological Properties of Ti-20Zr-6.5Al-4V Alloy as Influenced by Sliding Velocities

H. Zhong, L. Y. Dai, Y. J. Yang, Y. Yue, B. A. Wang, X. Y. Zhang, M. Z. Ma, R. P. Liu

Comprehensive Understanding of Ductility Loss Mechanisms in Various Steels with External and Internal Hydrogen

Osamu Takakuwa, Junichiro Yamabe, Hisao Matsunaga, Yoshiyuki Furuya, Saburo Matsuoka

Magnetocaloric Effect with Very Small Magnetic Hysteresis Losses of CoMn1−x Ti x Ge Alloys

Oguz Yildirim, Onur Tozkoparan, Ercument Yuzuak, Yalcin Elerman, Ilker Dincer

Open Access

Microstructure and Texture Evolutions of Biomedical Ti-13Nb-13Zr Alloy Processed by Hydrostatic Extrusion

K. Ozaltin, A. Panigrahi, W. Chrominski, A. G. Bulutsuz, M. Kulczyk, M. J. Zehetbauer, M. Lewandowska

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.